Re: Realtek Edimax AC1750 USB gets properly detected but not configurable in ifconfig
Judging by the dmesg there is at least one unoccupied PCIe slot that could accommodate an adapter such as a Silverstone ECWA2-LITE. This would allow you to use Mini-PCIe cards that normally go in laptops, including all of the iwm(4) devices. -- Patrick Harper paia...@fastmail.com On Sat, 6 Jun 2020, at 19:44, Tristan wrote: > Oh sorry, my mistake, I might need some sleep :) > > Thanks for the list of USB adapters, that helps a lot. > > > On Jun 6, 2020, at 9:35 PM, Stuart Henderson wrote: > > > > On 2020/06/06 19:14, Tristan wrote: > >> Ok thanks. Yes I’m looking for just using 11n. > > > > You already replied saying that! > > > > It doesn't matter if you only want to use 11n, OpenBSD does not have a > > driver for the controller used in that adapter. > > > > For USB adapters look for a device using one of these: > > > > bwfm(4) - Broadcom and Cypress IEEE 802.11a/ac/b/g/n wireless network device > > otus(4) - Atheros USB IEEE 802.11a/b/g/n wireless network device > > rsu(4) - Realtek RTL8188SU/RTL8192SU USB IEEE 802.11b/g/n wireless network > > device > > run(4) - Ralink Technology/MediaTek USB IEEE 802.11a/b/g/n wireless network > > device > > urtwn(4) - Realtek RTL8188CU/RTL8188EU/RTL8192CU/RTL8192EU USB IEEE > > 802.11b/g/n wireless network device > > > > (or there are some 11g-only ones but not much point looking for them). > > > > > >> > On Jun 6, 2020, at 5:55 AM, Stuart Henderson > wrote: > >>> > >>> On 2020-06-05, Tristan wrote: > Just plugged in a Realtek Edimax AC1750 USB card into a ASRock B450M > board. > I can see the card being detected and registered properly in dmesg and > usbdevs, but cannot configure it. > Is this card supported? > >>> > >>> No. The only supported 11ac USB devices are the limited and fairly hard > >>> to get > >>> hold of bwfm(4) devices. (Some PCIe 11ac are supported but not in 11ac > >>> mode.) > >>> > >>> > >>> > >> > > > >
Re: Realtek Edimax AC1750 USB gets properly detected but not configurable in ifconfig
Oh sorry, my mistake, I might need some sleep :) Thanks for the list of USB adapters, that helps a lot. > On Jun 6, 2020, at 9:35 PM, Stuart Henderson wrote: > > On 2020/06/06 19:14, Tristan wrote: >> Ok thanks. Yes I’m looking for just using 11n. > > You already replied saying that! > > It doesn't matter if you only want to use 11n, OpenBSD does not have a > driver for the controller used in that adapter. > > For USB adapters look for a device using one of these: > > bwfm(4) - Broadcom and Cypress IEEE 802.11a/ac/b/g/n wireless network device > otus(4) - Atheros USB IEEE 802.11a/b/g/n wireless network device > rsu(4) - Realtek RTL8188SU/RTL8192SU USB IEEE 802.11b/g/n wireless network > device > run(4) - Ralink Technology/MediaTek USB IEEE 802.11a/b/g/n wireless network > device > urtwn(4) - Realtek RTL8188CU/RTL8188EU/RTL8192CU/RTL8192EU USB IEEE > 802.11b/g/n wireless network device > > (or there are some 11g-only ones but not much point looking for them). > > >> On Jun 6, 2020, at 5:55 AM, Stuart Henderson wrote: >>> >>> On 2020-06-05, Tristan wrote: Just plugged in a Realtek Edimax AC1750 USB card into a ASRock B450M board. I can see the card being detected and registered properly in dmesg and usbdevs, but cannot configure it. Is this card supported? >>> >>> No. The only supported 11ac USB devices are the limited and fairly hard to >>> get >>> hold of bwfm(4) devices. (Some PCIe 11ac are supported but not in 11ac >>> mode.) >>> >>> >>> >> >
Re: Realtek Edimax AC1750 USB gets properly detected but not configurable in ifconfig
On 2020/06/06 19:14, Tristan wrote: > Ok thanks. Yes I’m looking for just using 11n. You already replied saying that! It doesn't matter if you only want to use 11n, OpenBSD does not have a driver for the controller used in that adapter. For USB adapters look for a device using one of these: bwfm(4) - Broadcom and Cypress IEEE 802.11a/ac/b/g/n wireless network device otus(4) - Atheros USB IEEE 802.11a/b/g/n wireless network device rsu(4) - Realtek RTL8188SU/RTL8192SU USB IEEE 802.11b/g/n wireless network device run(4) - Ralink Technology/MediaTek USB IEEE 802.11a/b/g/n wireless network device urtwn(4) - Realtek RTL8188CU/RTL8188EU/RTL8192CU/RTL8192EU USB IEEE 802.11b/g/n wireless network device (or there are some 11g-only ones but not much point looking for them). > > > On Jun 6, 2020, at 5:55 AM, Stuart Henderson wrote: > > > > On 2020-06-05, Tristan wrote: > >> Just plugged in a Realtek Edimax AC1750 USB card into a ASRock B450M board. > >> I can see the card being detected and registered properly in dmesg and > >> usbdevs, but cannot configure it. > >> Is this card supported? > > > > No. The only supported 11ac USB devices are the limited and fairly hard to > > get > > hold of bwfm(4) devices. (Some PCIe 11ac are supported but not in 11ac > > mode.) > > > > > > >
Re: Realtek Edimax AC1750 USB gets properly detected but not configurable in ifconfig
Ok thanks. Yes I’m looking for just using 11n. > On Jun 6, 2020, at 5:55 AM, Stuart Henderson wrote: > > On 2020-06-05, Tristan wrote: >> Just plugged in a Realtek Edimax AC1750 USB card into a ASRock B450M board. >> I can see the card being detected and registered properly in dmesg and >> usbdevs, but cannot configure it. >> Is this card supported? > > No. The only supported 11ac USB devices are the limited and fairly hard to get > hold of bwfm(4) devices. (Some PCIe 11ac are supported but not in 11ac mode.) > > >
Re: Realtek Edimax AC1750 USB gets properly detected but not configurable in ifconfig
On 2020-06-05, Tristan wrote: > Just plugged in a Realtek Edimax AC1750 USB card into a ASRock B450M board. > I can see the card being detected and registered properly in dmesg and > usbdevs, but cannot configure it. > Is this card supported? No. The only supported 11ac USB devices are the limited and fairly hard to get hold of bwfm(4) devices. (Some PCIe 11ac are supported but not in 11ac mode.)
Realtek Edimax AC1750 USB gets properly detected but not configurable in ifconfig
Hi, Just plugged in a Realtek Edimax AC1750 USB card into a ASRock B450M board. I can see the card being detected and registered properly in dmesg and usbdevs, but cannot configure it. Is this card supported? Thanks usbdevs output: Controller /dev/usb0: addr 01: 1022: AMD, xHCI root hub addr 02: 7392:a833 Realtek, Edimax AC1750 USB Controller /dev/usb1: addr 01: 1022: AMD, xHCI root hub addr 02: 0bc2:ab24 Seagate, BUP Slim BK Controller /dev/usb2: addr 01: 1022: AMD, xHCI root hub ifconfig only shows these: lo0: flags=8049 mtu 32768 em0: flags=8b43 mtu 1500 em1: flags=8b43 mtu 1500 em2: flags=8b43 mtu 1500 em3: flags=8b43 mtu 1500 re0: flags=808843 mtu 1500 bridge0: flags=41 tun0: flags=8051 mtu 1420 vether0: flags=8943 mtu 1500 pflog0: flags=141 mtu 33136 if it's any use also my sysctl hw hw.machine=amd64 hw.model=AMD Ryzen 5 3400G with Radeon Vega Graphics hw.ncpu=8 hw.byteorder=1234 hw.pagesize=4096 hw.disknames=sd0:11f200d7c36ede5d,sd1:44046d966725a401,sd2:eb4c6024594010f9 hw.diskcount=3 hw.sensors.ksmn0.temp0=35.50 degC hw.sensors.lm1.temp0=29.00 degC (MB Temperature) hw.sensors.lm1.temp1=32.00 degC (CPU Temperature) hw.sensors.lm1.temp2=93.00 degC (Aux Temp0) hw.sensors.lm1.temp3=99.00 degC (Aux Temp1) hw.sensors.lm1.temp4=22.50 degC (Aux Temp2) hw.sensors.lm1.temp5=-20.00 degC (Aux Temp3) hw.sensors.lm1.fan0=0 RPM (System Fan) hw.sensors.lm1.fan1=2008 RPM (CPU Fan) hw.sensors.lm1.fan2=0 RPM (Aux Fan0) hw.sensors.lm1.fan3=1112 RPM (Aux Fan1) hw.sensors.lm1.fan4=0 RPM (Aux Fan2) hw.sensors.lm1.volt0=0.93 VDC (VCore) hw.sensors.lm1.volt1=1.85 VDC (VIN1) hw.sensors.lm1.volt2=3.42 VDC (AVCC) hw.sensors.lm1.volt3=3.42 VDC (+3.3V) hw.sensors.lm1.volt4=21.66 VDC (VIN0) hw.sensors.lm1.volt5=1.06 VDC (VIN8) hw.sensors.lm1.volt6=0.30 VDC (VIN4) hw.sensors.lm1.volt7=3.46 VDC (+3.3VSB) hw.sensors.lm1.volt8=0.00 VDC (VBAT) hw.sensors.lm1.volt9=0.00 VDC (VTT) hw.sensors.lm1.volt10=0.22 VDC (VIN5) hw.sensors.lm1.volt11=1.06 VDC (VIN6) hw.sensors.lm1.volt12=3.38 VDC (VIN2) hw.sensors.lm1.volt13=5.08 VDC (VIN3) hw.sensors.lm1.volt14=1.78 VDC (VIN7) hw.cpuspeed=3693 hw.setperf=100 hw.vendor=ASRock hw.product=B450M Steel Legend hw.uuid=a8a1591a-3356--- hw.physmem=32120504320 hw.usermem=32120492032 hw.ncpufound=8 hw.allowpowerdown=1 hw.perfpolicy=manual hw.smt=1 hw.ncpuonline=8 Find my current dmesg. OpenBSD 6.7 (GENERIC.MP) #2: Thu Jun 4 09:55:08 MDT 2020 r...@syspatch-67-amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 32120504320 (30632MB) avail mem = 31134412800 (29692MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 3.2 @ 0xe6cc0 (29 entries) bios0: vendor American Megatrends Inc. version "P2.90" date 11/27/2019 bios0: ASRock B450M Steel Legend acpi0 at bios0: ACPI 6.0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP APIC FPDT FIDT SSDT SSDT SSDT MCFG AAFT HPET UEFI BGRT SSDT CRAT CDIT SSDT SSDT WSMT SSDT acpi0: wakeup devices GPP0(S4) GPP2(S4) GPP3(S4) GPP4(S4) GPP5(S4) GPP6(S4) GP17(S4) XHC0(S4) XHC1(S4) GP18(S4) GPP1(S4) PTXH(S4) acpitimer0 at acpi0: 3579545 Hz, 32 bits acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: AMD Ryzen 5 3400G with Radeon Vega Graphics, 3693.67 MHz, 17-18-01 cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,RDRAND,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,SKINIT,TCE,TOPEXT,CPCTR,DBKP,PCTRL3,MWAITX,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA,IBPB,XSAVEOPT,XSAVEC,XGETBV1,XSAVES cpu0: 64KB 64b/line 4-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line 8-way L2 cache, 4MB 64b/line 16-way L3 cache cpu0: ITLB 64 4KB entries fully associative, 64 4MB entries fully associative cpu0: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 24MHz cpu0: mwait min=64, max=64, C-substates=1.1, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: AMD Ryzen 5 3400G with Radeon Vega Graphics, 3693.02 MHz, 17-18-01 cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,RDRAND,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,SKINIT,TCE,TOPEXT,CPCTR,DBKP,PCTRL3,MWAITX,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,RDSEED,ADX,SMAP,CLFLUSHOPT,SHA,IBPB,XSAVEOPT,XSAVEC,XGETBV1,XSAVES cpu1: 64KB 64b/line 4-way I-cache, 32KB 64b/line 8-way D-cache, 512KB 64b/line 8-way L2 cache, 4MB 64b/line 16-way L3 cache cpu1: ITLB 64 4KB entries fully associative, 64 4MB entries fully associative cpu1: DTLB 64 4KB entries fully
