Re: Release 3.7
At 02:44 PM 3/5/2005 -0600, Jim Mays wrote: How does one find out what is planned for the 3.7 release and how do I pre-order it (in order to get it first)? Jim Mays You might want to check your bookshelf - 3.7 started shipping last month. Normally, pre-orders are accepted 30-60 days in advance, simplest solution is to watch the web site for the order page to be updated. Lee
Re: Release 3.7
On Sat, 2005-03-05 at 14:44:41 -0600, Jim Mays proclaimed... How does one find out what is planned for the 3.7 release and how do I pre-order it (in order to get it first)? 3.7 has been out since May 17th, 2005. Read http://www.openbsd.org/ It's a good starting place.
Re: Release 3.7
On Wed, 2005-07-06 at 13:16 -0500, eric wrote: On Sat, 2005-03-05 at 14:44:41 -0600, Jim Mays proclaimed... How does one find out what is planned for the 3.7 release and how do I pre-order it (in order to get it first)? 3.7 has been out since May 17th, 2005. Read http://www.openbsd.org/ It's a good starting place. Reading the date header of the original message would have been a good starting place, too... -- Shawn K. Quinn [EMAIL PROTECTED]
Re: Release 3.7
On Sat, 5 Mar 2005 14:44:41 -0600 Jim Mays [EMAIL PROTECTED] wrote: Uh, what's with the time machine? --- Lars Hansson
kernel: integer divide fault trap, code=0 release 3.7
Regards. I tried to upgrade my 3.6 OpenBSD to 3.7. I tried to upgrade from CD, but the kernel faulted. dmesg results: umass0: DATAFB Flash Reader, rev 2.00/11.25, addr 2 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets sd0 at scsibus targ 1 lun 0: Generic, STORAGE DEVICE, 1125 SCSI0 0/direct removable sd0: drive offline sd1 at scsibus targ 1 lun 1. Generic, STORAGE DEVICE, 1125 SCSI0 0/direct removable sd1: drive offline sd2 at scsibus targ 1 lun 2: Generic, STORAGE DEVICE, 1125 SCSI0 0/direct removable sd2: drive offline sd3 at scsibus targ 1 lun 3: Generic, STORAGE DEVICE, 1125 SCSI0 0/direct removable sd3: drive offline dkcsum: wd0 matched BIOS disk 80 kernel: integer divide fault trap, code=0 Stopped at ststrategy+0x44 divl 0x28(%edi),%eax ddb I have IDE HDD. wd0. OpenBSD 3.6 on boot dmesg says: umass0: DATAFB Flash Reader, rev 2.00/11.25, addr 2 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets sd0 at scsibus targ 1 lun 0: Generic, STORAGE DEVICE, 1125 SCSI0 0/direct removable Automatic boot in progress... And everyting goes well with 3.6. Only 3.7 faults. Any suggestions? -- Adam Papai
Re: kernel: integer divide fault trap, code=0 release 3.7
Adam PAPAI wrote: Regards. I tried to upgrade my 3.6 OpenBSD to 3.7. kernel: integer divide fault trap, code=0 Stopped atsdstrategy+0x44divl0x28(%edi),%eax ddb I forgot to send the trace output: ddbtrace sdstrategy(d6a972e4,1,2000,d05bba80,0) at sdstrategy+0x44 dkcsumattach(d056c378,3,d06defa0,d02012fa,1fdf) at dkcsumattach+0x124 diskconf(1fdf,897ff,d05d,0,0) at diskconf+0xb main(0,0,0,0,0) at main+0x666 ddb -- Adam Papai
Re: kernel: integer divide fault trap, code=0 release 3.7
Adam PAPAI wrote: Regards. I tried to upgrade my 3.6 OpenBSD to 3.7. I tried to upgrade from CD, but the kernel faulted. Any suggestions? Yes, send a proper bug report. http://www.openbsd.org/report.html -d
Re: kernel: integer divide fault trap, code=0 release 3.7
Adam PAPAI wrote: Adam PAPAI wrote: Regards. I tried to upgrade my 3.6 OpenBSD to 3.7. kernel: integer divide fault trap, code=0 Stopped atsdstrategy+0x44divl0x28(%edi),%eax ddb I forgot to send the trace output: ddbtrace sdstrategy(d6a972e4,1,2000,d05bba80,0) at sdstrategy+0x44 dkcsumattach(d056c378,3,d06defa0,d02012fa,1fdf) at dkcsumattach+0x124 diskconf(1fdf,897ff,d05d,0,0) at diskconf+0xb main(0,0,0,0,0) at main+0x666 ddb no, this is still not a complete bug report. http://www.openbsd.org/report.html