Dear Misc,
I purchased a SIIG Cyber 4S PCI (quad serial). After installation
of the card and a -current kernel (2005-10-31) I find the chip is
not being configured. Looks like the classic chip change without a
product number change.
The dmesg lines which are problematic are:
vendor "Oxford", unknown product 0x9501 (class communications subclass serial, rev 0x00) at
pci0 dev 9 function 0 not configured
vendor "Oxford", unknown product 0x9510 (class bridge subclass miscellaneous, rev 0x00) at
pci0 dev 9 function 1 not configured
I personally lack a sufficiently clear understanding of what
needs to be added to the kernel to make this board work.
All help will be gratefully received.
Good night and good luck,
Ray
OpenBSD 3.8-current (GENERIC) #229: Mon Oct 31 14:20:14 MST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium/MMX ("GenuineIntel" 586-class) 200 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,MMX
cpu0: F00F bug workaround installed
real mem = 133804032 (130668K)
avail mem = 115499008 (112792K)
using 1658 buffers containing 6791168 bytes (6632K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(6c) BIOS, date 07/08/98, BIOS32 rev. 0 @ 0xf0400
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xa22
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf09b0/112 (5 entries)
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xc0000/0x8000
ipmi at mainbus0 not configured
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82439HX" rev 0x03
pcib0 at pci0 dev 7 function 0 "Intel 82371SB ISA" rev 0x01
pciide0 at pci0 dev 7 function 1 "Intel 82371SB IDE" rev 0x00: DMA, channel 0 wired to
compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <Maxtor 91021U2>
wd0: 16-sector PIO, LBA, 9641MB, 19746720 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LITEON, CD-ROM LTN341, ML16> SCSI0 5/cdrom
removable
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
cd0(pciide0:0:1): using PIO mode 4, DMA mode 2
atapiscsi1 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi1: 2 targets
sd0 at scsibus1 targ 0 lun 0: <IOMEGA, ZIP 100, 23.D> SCSI0 0/direct removable
sd0: drive offline
sd0(pciide0:1:0): using PIO mode 0
vendor "Oxford", unknown product 0x9501 (class communications subclass serial, rev 0x00)
at pci0 dev 9 function 0 not configured
vendor "Oxford", unknown product 0x9510 (class bridge subclass miscellaneous, rev 0x00) at
pci0 dev 9 function 1 not configured
rl0 at pci0 dev 10 function 0 "D-Link Systems 530TX+" rev 0x10: irq 12, address
00:05:5d:d1:5f:fa
rlphy0 at rl0 phy 0: RTL internal phy
rl1 at pci0 dev 11 function 0 "D-Link Systems 530TX+" rev 0x10: irq 10, address
00:05:5d:36:39:4a
rlphy1 at rl1 phy 0: RTL internal phy
vga1 at pci0 dev 12 function 0 "ATI Mach64 GP" rev 0x5c
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom0: console
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask eb65 netmask ff65 ttymask ffe7
pctr: 586-class performance counters and user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
