Re: Slow IO in PowerEdge R200 X3330 2.66Ghz 2x3MB Cache.
I think, that someone told to you that you must use current ;-) Anyway here you can find something about AHCI and SATA http://en.wikipedia.org/wiki/Serial_ATA If you don't have option to turn AHCI on in your BIOS then you may have problems. If you will read this http://www.openbsd.org/cgi-bin/man.cgi?query=ahciapropos=0sektion=0manpath =OpenBSD+Currentarch=i386format=html then you will know that AHCI simulate SCSCI and that's why your disk will be sd then. On Wed, Feb 24, 2010 at 3:46 AM, Andres Salazar ndrsslz...@gmail.com wrote: Hello, I believe that these disks are SATA II (http://www.seagate.com/ww/v/index.jsp?vgnextoid=6278576e14ee9110VgnVCM10 f5ee0a0aRCRD) and thus would always fall under wd driver as per the man page. I believe that sd is for scsi only. Is this assumption correct? Andres On Tue, Feb 23, 2010 at 3:36 PM, Marco Peereboom sl...@peereboom.us wrote: Your disks are still wd so io sucks. B Use -current. On Tue, Feb 23, 2010 at 03:22:28PM -0600, Andres Salazar wrote: Hello, I had a R201 running in 4.6 i386 stable..I was told this configuration was very new.. so I got a new box this time its a PowerEdge is R200 without any special PCI SATA controller. With 2 SATA II Hard Disks. BIOS Sata setting is set to be B in ATA Mode (its either this or OFF). Either after all this change, and a clean install the IO is 55% greater then all my other machines. For example a userland recompile takes 55min , vrs the same proc and ram on another box is 35 min. Below is my dmesg.. which I dont see any flag?? Possibly there must be some incompatibility with the hard disk? OpenBSD 4.6-stable (GENERIC-13-12-09.MP) #0: Tue Feb 23 16:08:43 CST 2010 B B r...@bazz.my.domain:/usr/src/sys/arch/i386/compile/GENERIC-13-12-09.MP cpu0: Intel(R) Xeon(R) CPU X3330 @ 2.66GHz (GenuineIntel 686-class) 2.67 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,C X16,xTPR real mem B = 3487866880 (3326MB) avail mem = 3383250944 (3226MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 05/15/09, BIOS32 rev. 0 @ 0xfac90, SMBIOS rev. 2.5 @ 0xcff9c000 (46 entries) bios0: vendor Dell Inc. version 1.4.3 date 05/15/2009 bios0: Dell Inc. PowerEdge R200 acpi0 at bios0: rev 2 acpi0: tables DSDT FACP APIC SPCR HPET MCFG WD__ SLIC ERST HEST BERT EINJ SSDT SSDT SSDT SSDT SSDT acpi0: wakeup devices PCI0(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 333MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Xeon(R) CPU X3330 @ 2.66GHz (GenuineIntel 686-class) 2.67 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,C X16,xTPR cpu2 at mainbus0: apid 2 (application processor) cpu2: Intel(R) Xeon(R) CPU X3330 @ 2.66GHz (GenuineIntel 686-class) 2.67 GHz cpu2: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,C X16,xTPR cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Xeon(R) CPU X3330 @ 2.66GHz (GenuineIntel 686-class) 2.67 GHz cpu3: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,C X16,xTPR ioapic0 at mainbus0: apid 4 pa 0xfec0, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 4 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (PEX1) acpiprt2 at acpi0: bus 2 (SBE0) acpiprt3 at acpi0: bus 3 (SBE4) acpiprt4 at acpi0: bus 4 (SBE5) acpiprt5 at acpi0: bus 5 (COMP) acpicpu0 at acpi0: PSS acpicpu1 at acpi0: PSS acpicpu2 at acpi0: PSS acpicpu3 at acpi0: PSS bios0: ROM list: 0xc/0x9000 0xc9000/0x1000 0xca000/0x1800 0xec000/0x4000! ipmi at mainbus0 not configured cpu0: Enhanced SpeedStep 2667 MHz: speeds: 2667, 2333, 2000 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 Intel 3200/3210 Host rev 0x01 ppb0 at pci0 dev 1 function 0 Intel 3200/3210 PCIE rev 0x01: apic 4 int 16 (irq 15) pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 0 Intel 82801I PCIE rev 0x02: apic 4 int 16 (irq 15) pci2 at ppb1 bus 2 ppb2 at pci0 dev 28 function 4 Intel 82801I PCIE rev 0x02 pci3 at ppb2 bus 3 bge0 at pci3 dev 0 function 0 Broadcom BCM5721 rev 0x21, BCM5750 C1 (0x4201): apic 4 int 16 (irq 15), address 00:25:64:3c:7f:8c brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 ppb3 at pci0 dev 28 function 5 Intel 82801I PCIE rev 0x02 pci4 at ppb3 bus 4 bge1 at pci4 dev 0 function 0 Broadcom BCM5721 rev 0x21, BCM5750 C1 (0x4201): apic 4 int 17 (irq 14), address 00:25:64:3c:7f:8d
Slow IO in PowerEdge R200 X3330 2.66Ghz 2x3MB Cache.
Hello, I had a R201 running in 4.6 i386 stable..I was told this configuration was very new.. so I got a new box this time its a PowerEdge is R200 without any special PCI SATA controller. With 2 SATA II Hard Disks. BIOS Sata setting is set to be in ATA Mode (its either this or OFF). Either after all this change, and a clean install the IO is 55% greater then all my other machines. For example a userland recompile takes 55min , vrs the same proc and ram on another box is 35 min. Below is my dmesg.. which I dont see any flag?? Possibly there must be some incompatibility with the hard disk? OpenBSD 4.6-stable (GENERIC-13-12-09.MP) #0: Tue Feb 23 16:08:43 CST 2010 r...@bazz.my.domain:/usr/src/sys/arch/i386/compile/GENERIC-13-12-09.MP cpu0: Intel(R) Xeon(R) CPU X3330 @ 2.66GHz (GenuineIntel 686-class) 2.67 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR real mem = 3487866880 (3326MB) avail mem = 3383250944 (3226MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 05/15/09, BIOS32 rev. 0 @ 0xfac90, SMBIOS rev. 2.5 @ 0xcff9c000 (46 entries) bios0: vendor Dell Inc. version 1.4.3 date 05/15/2009 bios0: Dell Inc. PowerEdge R200 acpi0 at bios0: rev 2 acpi0: tables DSDT FACP APIC SPCR HPET MCFG WD__ SLIC ERST HEST BERT EINJ SSDT SSDT SSDT SSDT SSDT acpi0: wakeup devices PCI0(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 333MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Xeon(R) CPU X3330 @ 2.66GHz (GenuineIntel 686-class) 2.67 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR cpu2 at mainbus0: apid 2 (application processor) cpu2: Intel(R) Xeon(R) CPU X3330 @ 2.66GHz (GenuineIntel 686-class) 2.67 GHz cpu2: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Xeon(R) CPU X3330 @ 2.66GHz (GenuineIntel 686-class) 2.67 GHz cpu3: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR ioapic0 at mainbus0: apid 4 pa 0xfec0, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 4 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (PEX1) acpiprt2 at acpi0: bus 2 (SBE0) acpiprt3 at acpi0: bus 3 (SBE4) acpiprt4 at acpi0: bus 4 (SBE5) acpiprt5 at acpi0: bus 5 (COMP) acpicpu0 at acpi0: PSS acpicpu1 at acpi0: PSS acpicpu2 at acpi0: PSS acpicpu3 at acpi0: PSS bios0: ROM list: 0xc/0x9000 0xc9000/0x1000 0xca000/0x1800 0xec000/0x4000! ipmi at mainbus0 not configured cpu0: Enhanced SpeedStep 2667 MHz: speeds: 2667, 2333, 2000 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 Intel 3200/3210 Host rev 0x01 ppb0 at pci0 dev 1 function 0 Intel 3200/3210 PCIE rev 0x01: apic 4 int 16 (irq 15) pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 0 Intel 82801I PCIE rev 0x02: apic 4 int 16 (irq 15) pci2 at ppb1 bus 2 ppb2 at pci0 dev 28 function 4 Intel 82801I PCIE rev 0x02 pci3 at ppb2 bus 3 bge0 at pci3 dev 0 function 0 Broadcom BCM5721 rev 0x21, BCM5750 C1 (0x4201): apic 4 int 16 (irq 15), address 00:25:64:3c:7f:8c brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 ppb3 at pci0 dev 28 function 5 Intel 82801I PCIE rev 0x02 pci4 at ppb3 bus 4 bge1 at pci4 dev 0 function 0 Broadcom BCM5721 rev 0x21, BCM5750 C1 (0x4201): apic 4 int 17 (irq 14), address 00:25:64:3c:7f:8d brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 uhci0 at pci0 dev 29 function 0 Intel 82801I USB rev 0x02: apic 4 int 21 (irq 11) uhci1 at pci0 dev 29 function 1 Intel 82801I USB rev 0x02: apic 4 int 20 (irq 10) uhci2 at pci0 dev 29 function 2 Intel 82801I USB rev 0x02: apic 4 int 21 (irq 11) ehci0 at pci0 dev 29 function 7 Intel 82801I USB rev 0x02: apic 4 int 21 (irq 11) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1 ppb4 at pci0 dev 30 function 0 Intel 82801BA Hub-to-PCI rev 0x92 pci5 at ppb4 bus 5 vga1 at pci5 dev 5 function 0 ATI ES1000 rev 0x02 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) radeondrm0 at vga1: apic 4 int 19 (irq 5) drm0 at radeondrm0 ichpcib0 at pci0 dev 31 function 0 Intel 82801IR LPC rev 0x02: PM disabled pciide0 at pci0 dev 31 function 2 Intel 82801I SATA rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide0: using apic 4 int 23 (irq 6) for native-PCI interrupt wd0 at pciide0 channel 0 drive 0: ST3250310NS wd0: 16-sector
Re: Slow IO in PowerEdge R200 X3330 2.66Ghz 2x3MB Cache.
Your disks are still wd so io sucks. Use -current. On Tue, Feb 23, 2010 at 03:22:28PM -0600, Andres Salazar wrote: Hello, I had a R201 running in 4.6 i386 stable..I was told this configuration was very new.. so I got a new box this time its a PowerEdge is R200 without any special PCI SATA controller. With 2 SATA II Hard Disks. BIOS Sata setting is set to be in ATA Mode (its either this or OFF). Either after all this change, and a clean install the IO is 55% greater then all my other machines. For example a userland recompile takes 55min , vrs the same proc and ram on another box is 35 min. Below is my dmesg.. which I dont see any flag?? Possibly there must be some incompatibility with the hard disk? OpenBSD 4.6-stable (GENERIC-13-12-09.MP) #0: Tue Feb 23 16:08:43 CST 2010 r...@bazz.my.domain:/usr/src/sys/arch/i386/compile/GENERIC-13-12-09.MP cpu0: Intel(R) Xeon(R) CPU X3330 @ 2.66GHz (GenuineIntel 686-class) 2.67 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR real mem = 3487866880 (3326MB) avail mem = 3383250944 (3226MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 05/15/09, BIOS32 rev. 0 @ 0xfac90, SMBIOS rev. 2.5 @ 0xcff9c000 (46 entries) bios0: vendor Dell Inc. version 1.4.3 date 05/15/2009 bios0: Dell Inc. PowerEdge R200 acpi0 at bios0: rev 2 acpi0: tables DSDT FACP APIC SPCR HPET MCFG WD__ SLIC ERST HEST BERT EINJ SSDT SSDT SSDT SSDT SSDT acpi0: wakeup devices PCI0(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 333MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Xeon(R) CPU X3330 @ 2.66GHz (GenuineIntel 686-class) 2.67 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR cpu2 at mainbus0: apid 2 (application processor) cpu2: Intel(R) Xeon(R) CPU X3330 @ 2.66GHz (GenuineIntel 686-class) 2.67 GHz cpu2: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Xeon(R) CPU X3330 @ 2.66GHz (GenuineIntel 686-class) 2.67 GHz cpu3: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR ioapic0 at mainbus0: apid 4 pa 0xfec0, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 4 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (PEX1) acpiprt2 at acpi0: bus 2 (SBE0) acpiprt3 at acpi0: bus 3 (SBE4) acpiprt4 at acpi0: bus 4 (SBE5) acpiprt5 at acpi0: bus 5 (COMP) acpicpu0 at acpi0: PSS acpicpu1 at acpi0: PSS acpicpu2 at acpi0: PSS acpicpu3 at acpi0: PSS bios0: ROM list: 0xc/0x9000 0xc9000/0x1000 0xca000/0x1800 0xec000/0x4000! ipmi at mainbus0 not configured cpu0: Enhanced SpeedStep 2667 MHz: speeds: 2667, 2333, 2000 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 Intel 3200/3210 Host rev 0x01 ppb0 at pci0 dev 1 function 0 Intel 3200/3210 PCIE rev 0x01: apic 4 int 16 (irq 15) pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 0 Intel 82801I PCIE rev 0x02: apic 4 int 16 (irq 15) pci2 at ppb1 bus 2 ppb2 at pci0 dev 28 function 4 Intel 82801I PCIE rev 0x02 pci3 at ppb2 bus 3 bge0 at pci3 dev 0 function 0 Broadcom BCM5721 rev 0x21, BCM5750 C1 (0x4201): apic 4 int 16 (irq 15), address 00:25:64:3c:7f:8c brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 ppb3 at pci0 dev 28 function 5 Intel 82801I PCIE rev 0x02 pci4 at ppb3 bus 4 bge1 at pci4 dev 0 function 0 Broadcom BCM5721 rev 0x21, BCM5750 C1 (0x4201): apic 4 int 17 (irq 14), address 00:25:64:3c:7f:8d brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 uhci0 at pci0 dev 29 function 0 Intel 82801I USB rev 0x02: apic 4 int 21 (irq 11) uhci1 at pci0 dev 29 function 1 Intel 82801I USB rev 0x02: apic 4 int 20 (irq 10) uhci2 at pci0 dev 29 function 2 Intel 82801I USB rev 0x02: apic 4 int 21 (irq 11) ehci0 at pci0 dev 29 function 7 Intel 82801I USB rev 0x02: apic 4 int 21 (irq 11) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1 ppb4 at pci0 dev 30 function 0 Intel 82801BA Hub-to-PCI rev 0x92 pci5 at ppb4 bus 5 vga1 at pci5 dev 5 function 0 ATI ES1000 rev 0x02 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) radeondrm0 at vga1: apic 4 int 19 (irq 5) drm0 at radeondrm0 ichpcib0 at pci0 dev 31 function 0 Intel 82801IR LPC rev 0x02: PM disabled pciide0 at pci0 dev 31 function 2 Intel 82801I
Re: Slow IO in PowerEdge R200 X3330 2.66Ghz 2x3MB Cache.
Hello, I believe that these disks are SATA II (http://www.seagate.com/ww/v/index.jsp?vgnextoid=6278576e14ee9110VgnVCM10 f5ee0a0aRCRD) and thus would always fall under wd driver as per the man page. I believe that sd is for scsi only. Is this assumption correct? Andres On Tue, Feb 23, 2010 at 3:36 PM, Marco Peereboom sl...@peereboom.us wrote: Your disks are still wd so io sucks. Use -current. On Tue, Feb 23, 2010 at 03:22:28PM -0600, Andres Salazar wrote: Hello, I had a R201 running in 4.6 i386 stable..I was told this configuration was very new.. so I got a new box this time its a PowerEdge is R200 without any special PCI SATA controller. With 2 SATA II Hard Disks. BIOS Sata setting is set to be in ATA Mode (its either this or OFF). Either after all this change, and a clean install the IO is 55% greater then all my other machines. For example a userland recompile takes 55min , vrs the same proc and ram on another box is 35 min. Below is my dmesg.. which I dont see any flag?? Possibly there must be some incompatibility with the hard disk? OpenBSD 4.6-stable (GENERIC-13-12-09.MP) #0: Tue Feb 23 16:08:43 CST 2010 r...@bazz.my.domain:/usr/src/sys/arch/i386/compile/GENERIC-13-12-09.MP cpu0: Intel(R) Xeon(R) CPU X3330 @ 2.66GHz (GenuineIntel 686-class) 2.67 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,C X16,xTPR real mem = 3487866880 (3326MB) avail mem = 3383250944 (3226MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 05/15/09, BIOS32 rev. 0 @ 0xfac90, SMBIOS rev. 2.5 @ 0xcff9c000 (46 entries) bios0: vendor Dell Inc. version 1.4.3 date 05/15/2009 bios0: Dell Inc. PowerEdge R200 acpi0 at bios0: rev 2 acpi0: tables DSDT FACP APIC SPCR HPET MCFG WD__ SLIC ERST HEST BERT EINJ SSDT SSDT SSDT SSDT SSDT acpi0: wakeup devices PCI0(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 333MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Xeon(R) CPU X3330 @ 2.66GHz (GenuineIntel 686-class) 2.67 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,C X16,xTPR cpu2 at mainbus0: apid 2 (application processor) cpu2: Intel(R) Xeon(R) CPU X3330 @ 2.66GHz (GenuineIntel 686-class) 2.67 GHz cpu2: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,C X16,xTPR cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Xeon(R) CPU X3330 @ 2.66GHz (GenuineIntel 686-class) 2.67 GHz cpu3: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,C X16,xTPR ioapic0 at mainbus0: apid 4 pa 0xfec0, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 4 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (PEX1) acpiprt2 at acpi0: bus 2 (SBE0) acpiprt3 at acpi0: bus 3 (SBE4) acpiprt4 at acpi0: bus 4 (SBE5) acpiprt5 at acpi0: bus 5 (COMP) acpicpu0 at acpi0: PSS acpicpu1 at acpi0: PSS acpicpu2 at acpi0: PSS acpicpu3 at acpi0: PSS bios0: ROM list: 0xc/0x9000 0xc9000/0x1000 0xca000/0x1800 0xec000/0x4000! ipmi at mainbus0 not configured cpu0: Enhanced SpeedStep 2667 MHz: speeds: 2667, 2333, 2000 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 Intel 3200/3210 Host rev 0x01 ppb0 at pci0 dev 1 function 0 Intel 3200/3210 PCIE rev 0x01: apic 4 int 16 (irq 15) pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 0 Intel 82801I PCIE rev 0x02: apic 4 int 16 (irq 15) pci2 at ppb1 bus 2 ppb2 at pci0 dev 28 function 4 Intel 82801I PCIE rev 0x02 pci3 at ppb2 bus 3 bge0 at pci3 dev 0 function 0 Broadcom BCM5721 rev 0x21, BCM5750 C1 (0x4201): apic 4 int 16 (irq 15), address 00:25:64:3c:7f:8c brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 ppb3 at pci0 dev 28 function 5 Intel 82801I PCIE rev 0x02 pci4 at ppb3 bus 4 bge1 at pci4 dev 0 function 0 Broadcom BCM5721 rev 0x21, BCM5750 C1 (0x4201): apic 4 int 17 (irq 14), address 00:25:64:3c:7f:8d brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 uhci0 at pci0 dev 29 function 0 Intel 82801I USB rev 0x02: apic 4 int 21 (irq 11) uhci1 at pci0 dev 29 function 1 Intel 82801I USB rev 0x02: apic 4 int 20 (irq 10) uhci2 at pci0 dev 29 function 2 Intel 82801I USB rev 0x02: apic 4 int 21 (irq 11) ehci0 at pci0 dev 29 function 7 Intel 82801I USB rev 0x02: apic 4 int 21 (irq 11) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1 ppb4 at pci0 dev 30 function 0 Intel 82801BA Hub-to-PCI rev 0x92 pci5 at ppb4 bus 5
Re: Slow IO in PowerEdge R200 X3330 2.66Ghz 2x3MB Cache.
On Tue, Feb 23, 2010 at 08:46:57PM -0600, Andres Salazar wrote: Hello, I believe that these disks are SATA II (http://www.seagate.com/ww/v/index.jsp?vgnextoid=6278576e14ee9110VgnVCM10f5ee0a0aRCRD) and thus would always fall under wd driver as per the man page. I believe that sd is for scsi only. Is this assumption correct? it isn't and arguing with me isn't going to get you anywhere Andres On Tue, Feb 23, 2010 at 3:36 PM, Marco Peereboom sl...@peereboom.us wrote: Your disks are still wd so io sucks. ?Use -current. On Tue, Feb 23, 2010 at 03:22:28PM -0600, Andres Salazar wrote: Hello, I had a R201 running in 4.6 i386 stable..I was told this configuration was very new.. so I got a new box this time its a PowerEdge is R200 without any special PCI SATA controller. With 2 SATA II Hard Disks. BIOS Sata setting is set to be ?in ATA Mode (its either this or OFF). Either after all this change, and a clean install the IO is 55% greater then all my other machines. For example a userland recompile takes 55min , vrs the same proc and ram on another box is 35 min. Below is my dmesg.. which I dont see any flag?? Possibly there must be some incompatibility with the hard disk? OpenBSD 4.6-stable (GENERIC-13-12-09.MP) #0: Tue Feb 23 16:08:43 CST 2010 ? ? r...@bazz.my.domain:/usr/src/sys/arch/i386/compile/GENERIC-13-12-09.MP cpu0: Intel(R) Xeon(R) CPU X3330 @ 2.66GHz (GenuineIntel 686-class) 2.67 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR real mem ?= 3487866880 (3326MB) avail mem = 3383250944 (3226MB) mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 05/15/09, BIOS32 rev. 0 @ 0xfac90, SMBIOS rev. 2.5 @ 0xcff9c000 (46 entries) bios0: vendor Dell Inc. version 1.4.3 date 05/15/2009 bios0: Dell Inc. PowerEdge R200 acpi0 at bios0: rev 2 acpi0: tables DSDT FACP APIC SPCR HPET MCFG WD__ SLIC ERST HEST BERT EINJ SSDT SSDT SSDT SSDT SSDT acpi0: wakeup devices PCI0(S5) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 333MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Xeon(R) CPU X3330 @ 2.66GHz (GenuineIntel 686-class) 2.67 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR cpu2 at mainbus0: apid 2 (application processor) cpu2: Intel(R) Xeon(R) CPU X3330 @ 2.66GHz (GenuineIntel 686-class) 2.67 GHz cpu2: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Xeon(R) CPU X3330 @ 2.66GHz (GenuineIntel 686-class) 2.67 GHz cpu3: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR ioapic0 at mainbus0: apid 4 pa 0xfec0, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 4 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (PEX1) acpiprt2 at acpi0: bus 2 (SBE0) acpiprt3 at acpi0: bus 3 (SBE4) acpiprt4 at acpi0: bus 4 (SBE5) acpiprt5 at acpi0: bus 5 (COMP) acpicpu0 at acpi0: PSS acpicpu1 at acpi0: PSS acpicpu2 at acpi0: PSS acpicpu3 at acpi0: PSS bios0: ROM list: 0xc/0x9000 0xc9000/0x1000 0xca000/0x1800 0xec000/0x4000! ipmi at mainbus0 not configured cpu0: Enhanced SpeedStep 2667 MHz: speeds: 2667, 2333, 2000 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 Intel 3200/3210 Host rev 0x01 ppb0 at pci0 dev 1 function 0 Intel 3200/3210 PCIE rev 0x01: apic 4 int 16 (irq 15) pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 0 Intel 82801I PCIE rev 0x02: apic 4 int 16 (irq 15) pci2 at ppb1 bus 2 ppb2 at pci0 dev 28 function 4 Intel 82801I PCIE rev 0x02 pci3 at ppb2 bus 3 bge0 at pci3 dev 0 function 0 Broadcom BCM5721 rev 0x21, BCM5750 C1 (0x4201): apic 4 int 16 (irq 15), address 00:25:64:3c:7f:8c brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 ppb3 at pci0 dev 28 function 5 Intel 82801I PCIE rev 0x02 pci4 at ppb3 bus 4 bge1 at pci4 dev 0 function 0 Broadcom BCM5721 rev 0x21, BCM5750 C1 (0x4201): apic 4 int 17 (irq 14), address 00:25:64:3c:7f:8d brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 uhci0 at pci0 dev 29 function 0 Intel 82801I USB rev 0x02: apic 4 int 21 (irq 11) uhci1 at pci0 dev 29 function 1 Intel 82801I USB rev 0x02: apic 4 int 20 (irq 10) uhci2 at pci0 dev 29 function 2 Intel 82801I USB rev 0x02: apic 4 int 21 (irq 11) ehci0 at pci0 dev