Currently running OpenBSD i386 3.8 with one 20GB IDE drive at wd0a and
one 250gb IDE drive all partitioned for bsd.
Trying to install OpenBSD i386 4.2 from install42.iso by trading the
250gb drive for a cd-rom drive.
I keep getting this error message and I believe it has to do with the
missing 250gb drive:
/dev/rwd0a: file system is clean; not checking
Can't open /dev/rwd1d: Device not configured
CAN'T CHECK FILE SYSTEM.
/dev/rwd1d: UNEXPECTED INCONSISTENCY; RUN fsck_ffs MANUALLY.
Automatic file system check failed; help!
My dmesg output:
OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Celeron ("GenuineIntel" 686-class, 128KB L2 cache) 498 MHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem = 199860224 (195176K)
avail mem = 175497216 (171384K)
using 2465 buffers containing 10096640 bytes (9860K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(0e) BIOS, date 01/14/99, BIOS32 rev. 0 @ 0xeca00
pcibios0 at bios0: rev 2.1 @ 0xeca00/0x3600
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfe740/96 (4 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801AA LPC" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc/0x8000 0xc8000/0x1800 0xe/0x1!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82810E" rev 0x03: rng active, 8Kb/sec
vga1 at pci0 dev 1 function 0 "Intel 82810E Graphics" rev 0x03:
aperture at 0x4400, size 0x400
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb0 at pci0 dev 30 function 0 "Intel 82801AA Hub-to-PCI" rev 0x02
pci1 at ppb0 bus 1
fxp0 at pci1 dev 1 function 0 "Intel 82557" rev 0x08, i82559: irq 11,
address 00:03:47:13:bf:2c
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
ichpcib0 at pci0 dev 31 function 0 "Intel 82801AA LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801AA IDE" rev 0x02: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0:
wd0: 16-sector PIO, LBA, 19092MB, 39102336 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: SCSI0
5/cdrom removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 4
pciide0: channel 1 disabled (no drives)
uhci0 at pci0 dev 31 function 2 "Intel 82801AA USB" rev 0x02: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
auich0 at pci0 dev 31 function 5 "Intel 82801AA AC97" rev 0x02: irq 11, ICH AC97
ac97: codec id 0x41445348 (Analog Devices AD1881A)
ac97: codec features headphone, Analog Devices Phat Stereo
audio0 at auich0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0:
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask ff6d netmask ff6d ttymask ffef
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
I tried upgrading to OpenBSD 3.9 and got the same error message.
Thanks for helping!
--
Alan Hamlett
http://83p.unitedti.org