Re: Userland Compilation Dies

[Chris]

Oh no!

My eyes must have slipped up the page!  (I have the docs open on my
other machine, and I am going back and forth).  I have been at this too
long!  Thank you Mitja!

I actually did do it right the first time.. but it errored out.
Interesting that using the current didn't error out in the same way...

I wound up deleting /usr/src /usr/X4 and /usr/ports, downloading the
tarballs and updating them.  Then everything worked.

Thank you all for catching my blunder.

Chris



Chris wrote:

>Hello.
>
>I had an OBSD system, 3.6.  I went to update it the other day to 3.7,
>and everything seemed to work swell.  I followed the instructions from
>the upgrade faq, and things seemed to work without a hitch.
>
>I am trying to follow the stable branch, so updated my CVS for src,
>ports and X like so:
>
># cd /usr
>#cvs -d$CVSROOT up -Pd*
>
>*It took its time, but it updated everything without complaint.
>
>I then recompiled the kernel (GENERIC).  This also seemed to go without
>a hitch -- almost.  The only thing that seemed to contradict the
>documentation was that it said:
>
># *cd /usr/src/sys/arch/i386/conf*
># *config GENERIC*
># *cd ../compile/GENERIC*
># *make clean && make depend && make*
>/[...lots of output...]/
># *make install*
>  
>
>Replace "i386" in the first line with your machine name.
>
>Well, my machine name was nowhere to be found in /usr/src/sys/arch (or
>anywhere under /usr/src at all), so I had to use i386.  I don't know if
>this is an error in the docs or if something else somewhere got
>botched.  I do know that there were no complaints from the system
>what-so-ever.  It rebooted very nicely.
>
>Then I went to recompile the userland utilities.  I followed the
>documentation:
>
>   # *rm -rf /usr/obj/**   
>   # *cd /usr/src*
>   # *make obj*
>   # *cd /usr/src/etc && env DESTDIR=/ make distrib-dirs  
>   \\Now I am not certain if is an error in the docs.  Should it 
> be "setenv DESTIR=/"? (I tried both ways..)
>
>*  # *cd /usr/src*
>   # *make build*
>
>The compile goes for about 1 hour and 48 minutes, then it crashes:
>
>
>
>c++ -O2-fno-implicit-templates  -idirafter /=/usr/include/g++  
>-I/usr/src/gnu/e
>gcs/libio -I/usr/src/gnu/egcs/libio/obj -nostdinc -idirafter /=/usr/include -c 
>/usr
>/src/gnu/egcs/libio/editbuf.cc -o editbuf.o
>In file included from /usr/src/gnu/egcs/libio/editbuf.cc:31:
>/usr/src/gnu/egcs/libio/editbuf.h:79: error: friend declaration requires
>   class-key, i.e. `friend struct edit_buffer'
>/usr/src/gnu/egcs/libio/editbuf.cc: In member function `edit_buffer*
>   edit_mark::buffer()':
>/usr/src/gnu/egcs/libio/editbuf.cc:648: warning: invalid access to non-static
>   data member `edit_buffer::end_mark' of NULL object
>/usr/src/gnu/egcs/libio/editbuf.cc:648: warning: (perhaps the `offsetof' macro
>   was used incorrectly)
>*** Error code 1
>
>Stop in /usr/src/gnu/egcs/libio.
>*** Error code 1
>
>Stop in /usr/src/gnu/egcs/libio (line 48 of 
>/usr/src/gnu/egcs/libio/Makefile.bsd-wrapper).
>*** Error code 1
>
>Stop in /usr/src/gnu/egcs.
>*** Error code 1
>
>Stop in /usr/src/gnu/lib.
>*** Error code 1
>
>Stop in /usr/src (line 72 of Makefile).
>
>===
>
>I have gone through these steps repeatedly, and I get the same results every 
>time. 
>
>Can someone please give me a hand?
>
>Thanks!
>
>
>Chris
>
>
>
>My system:
>IBM thinkpad 390e
>256 megs of ram
>30 gb hard drive (21gb free)
>pentium II processor
>
>
>dmesg:
>==
>OpenBSD 3.7 (RAMDISK_CD) #573: Sun Mar 20 00:27:05 MST 2005
>[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
>cpu0: Intel Celeron ("GenuineIntel" 686-class, 256KB L2 cache) 299 MHz
>cpu0: 
>FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
>real mem  = 267952128 (261672K)
>avail mem = 238706688 (233112K)
>using 3296 buffers containing 13500416 bytes (13184K) of memory
>mainbus0 (root)
>bios0 at mainbus0: AT/286+(7c) BIOS, date 11/17/99, BIOS32 rev. 0 @ 0xfd7a0
>apm0 at bios0: Power Management spec V1.2
>pcibios0 at bios0: rev 2.1 @ 0xfd7a0/0x860
>pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf40/160 (8 entries)
>pcibios0: PCI Interrupt Router at 000:02:0 ("Intel 82371FB ISA" rev 0x00)
>pcibios0: PCI bus #3 is the last bus
>bios0: ROM list: 0xc/0xc000
>cpu0 at mainbus0
>pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
>pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
>ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
>pci1 at ppb0 bus 1
>vga1 at pci1 dev 0 function 0 "Neomagic Magicgraph NM2200" rev 0x20
>wsdisplay0 at vga1: console (80x25, vt100 emulation)
>pcib0 at pci0 dev 2 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
>pciide0 at pci0 dev 2 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 
>wired to compatib

Re: Userland Compilation Dies

[Nick Holland]

Stuart Henderson wrote:
> --On 22 September 2005 16:52 -0400, Chris wrote:
...
>> Replace "i386" in the first line with your machine name.
> 
> That's 'machine' as in 'what uname -m tells you' (i386, sparc64, 
> macppc, hppa, [...]), not hostname.

That was somewhat unclear on my part.  Fixed now.

Nick.

Re: Userland Compilation Dies

[Stuart Henderson]

--On 22 September 2005 16:52 -0400, Chris wrote:


I am trying to follow the stable branch, so updated my CVS for src,
ports and X like so:

# cd /usr
# cvs -d$CVSROOT up -Pd*


That's -current. Add -rOPENBSD_3_7 for 3.7-stable, or follow 
 updating beyond 3.7-stable 
(recompile C compiler, libstdc++, etc).



Replace "i386" in the first line with your machine name.


That's 'machine' as in 'what uname -m tells you' (i386, sparc64, 
macppc, hppa, [...]), not hostname.

Re: Userland Compilation Dies

[Greg Thomas]

On 9/22/05, Chris <[EMAIL PROTECTED]> wrote:
>
> Hello.
>
> I had an OBSD system, 3.6. I went to update it the other day to 3.7,
> and everything seemed to work swell. I followed the instructions from
> the upgrade faq, and things seemed to work without a hitch.
>
> I am trying to follow the stable branch, so updated my CVS for src,
> ports and X like so:
>
> # cd /usr
> #cvs -d$CVSROOT up -Pd*
>
> *It took its time, but it updated everything without complaint.



That's -current, not -stable.

Greg

Userland Compilation Dies

[Chris]

Hello.

I had an OBSD system, 3.6.  I went to update it the other day to 3.7,
and everything seemed to work swell.  I followed the instructions from
the upgrade faq, and things seemed to work without a hitch.

I am trying to follow the stable branch, so updated my CVS for src,
ports and X like so:

# cd /usr
#cvs -d$CVSROOT up -Pd*

*It took its time, but it updated everything without complaint.

I then recompiled the kernel (GENERIC).  This also seemed to go without
a hitch -- almost.  The only thing that seemed to contradict the
documentation was that it said:

# *cd /usr/src/sys/arch/i386/conf*
# *config GENERIC*
# *cd ../compile/GENERIC*
# *make clean && make depend && make*
/[...lots of output...]/
# *make install*
  

Replace "i386" in the first line with your machine name.

Well, my machine name was nowhere to be found in /usr/src/sys/arch (or
anywhere under /usr/src at all), so I had to use i386.  I don't know if
this is an error in the docs or if something else somewhere got
botched.  I do know that there were no complaints from the system
what-so-ever.  It rebooted very nicely.

Then I went to recompile the userland utilities.  I followed the
documentation:

# *rm -rf /usr/obj/**   
# *cd /usr/src*
# *make obj*
# *cd /usr/src/etc && env DESTDIR=/ make distrib-dirs  
\\Now I am not certain if is an error in the docs.  Should it 
be "setenv DESTIR=/"? (I tried both ways..)

*   # *cd /usr/src*
# *make build*

The compile goes for about 1 hour and 48 minutes, then it crashes:



c++ -O2-fno-implicit-templates  -idirafter /=/usr/include/g++  
-I/usr/src/gnu/e
gcs/libio -I/usr/src/gnu/egcs/libio/obj -nostdinc -idirafter /=/usr/include -c 
/usr
/src/gnu/egcs/libio/editbuf.cc -o editbuf.o
In file included from /usr/src/gnu/egcs/libio/editbuf.cc:31:
/usr/src/gnu/egcs/libio/editbuf.h:79: error: friend declaration requires
   class-key, i.e. `friend struct edit_buffer'
/usr/src/gnu/egcs/libio/editbuf.cc: In member function `edit_buffer*
   edit_mark::buffer()':
/usr/src/gnu/egcs/libio/editbuf.cc:648: warning: invalid access to non-static
   data member `edit_buffer::end_mark' of NULL object
/usr/src/gnu/egcs/libio/editbuf.cc:648: warning: (perhaps the `offsetof' macro
   was used incorrectly)
*** Error code 1

Stop in /usr/src/gnu/egcs/libio.
*** Error code 1

Stop in /usr/src/gnu/egcs/libio (line 48 of 
/usr/src/gnu/egcs/libio/Makefile.bsd-wrapper).
*** Error code 1

Stop in /usr/src/gnu/egcs.
*** Error code 1

Stop in /usr/src/gnu/lib.
*** Error code 1

Stop in /usr/src (line 72 of Makefile).

===

I have gone through these steps repeatedly, and I get the same results every 
time. 

Can someone please give me a hand?

Thanks!


Chris



My system:
IBM thinkpad 390e
256 megs of ram
30 gb hard drive (21gb free)
pentium II processor


dmesg:
==
OpenBSD 3.7 (RAMDISK_CD) #573: Sun Mar 20 00:27:05 MST 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel Celeron ("GenuineIntel" 686-class, 256KB L2 cache) 299 MHz
cpu0: 
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR
real mem  = 267952128 (261672K)
avail mem = 238706688 (233112K)
using 3296 buffers containing 13500416 bytes (13184K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(7c) BIOS, date 11/17/99, BIOS32 rev. 0 @ 0xfd7a0
apm0 at bios0: Power Management spec V1.2
pcibios0 at bios0: rev 2.1 @ 0xfd7a0/0x860
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf40/160 (8 entries)
pcibios0: PCI Interrupt Router at 000:02:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc/0xc000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Neomagic Magicgraph NM2200" rev 0x20
wsdisplay0 at vga1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 2 function 1 "Intel 82371AB IDE" rev 0x01: DMA, channel 0 
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: 
wd0: 16-sector PIO, LBA, 28615MB, 58605120 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0:  SCSI0 5/cdrom 
removable
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
uhci0 at pci0 dev 2 function 2 "Intel 82371AB USB" rev 0x01: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
"Intel 82371AB Power Mgmt" rev 0x02 at pci0