Re: X11 Issue - Integrated Intel Media Accelerator 900 Graphics (Intel 915GM)
"Intel 915GM/GMS Video" rev 0x03 at pci0 dev 2 function 1 not configured Hello, I have the same card and same dmesg line. I have Xorg working on my Compal laptop using "vesa" driver at 1024x768. Not too good but works ;-) If you need my xorg config file please let me know. Ramiro.
Re: X11 Issue - Integrated Intel Media Accelerator 900 Graphics (Intel 915GM)
d 269330400 wrote: > I recently installed OpenBSD 3.8 (I haven't received my 3.9 CD in the > mail yet), and am having problems getting X to work (among other > things). > > It's a Dell Inspiron 1300 notebook w/ Integrated Intel Media > Accelerator 900 Graphics (Intel 915GM). The full dmesg is below. Wait for your 3.9 CD or use -current, support for Intel 915 has gone in after 3.8. (See also the release notes for 3.9.) Until then, try using X with the VESA driver, which will work, albeit a bit slow... :)
Re: X11 Issue - Integrated Intel Media Accelerator 900 Graphics (Intel 915GM)
I ran into this on a Thinkpad T43 with a GMA900 adapter. I simply used
the xorg.conf created when installing 3.7 which simply specifies a
generic VGA/VESA adapter. As I remember when researching this matter,
the GMA900 driver is new and problematic. Given that I run 3.8 too, I
don't know if the driver in 3.9 resolves this or not.
Jim
-Original Message-
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf
Of d 269330400
Sent: Sunday, April 09, 2006 2:01 PM
To: misc@openbsd.org
Subject: X11 Issue - Integrated Intel Media Accelerator 900 Graphics
(Intel 915GM)
I recently installed OpenBSD 3.8 (I haven't received my 3.9 CD in the
mail yet), and am having problems getting X to work (among other
things).
It's a Dell Inspiron 1300 notebook w/ Integrated Intel Media
Accelerator 900 Graphics (Intel 915GM). The full dmesg is below.
So, quick question. I noticed the following bullet on the OpenBSD 3.9
release page. Could this be my problem? That is, is it referring to
the same Intel 915 as my graphics? Clueless, I know - sorry.
- Support the Intel i915 AGP
I've tried following the instructions in /usr/X11R6/README, using the
various X wizards (xorgcfg, xorgconfig, xf86config3), and
/etc/sysctl.conf has machdep.allowaperture set to 2 because I answered
yes to the X question during the install.
I also tried copying over the XF86Config and XF86Config-4 files that
were generated by a KNOPPIX live-CD that worked on the same box, but
that didn't work either.
Thanks.
--d
OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M processor 1.40GHz ("GenuineIntel"
686-class) 1.40 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH
,ACPI
,MMX,FXSR,SSE,SSE2,SS,TM,SBF
real mem = 527880192 (515508K)
avail mem = 474746880 (463620K)
using 4278 buffers containing 26497024 bytes (25876K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 01/24/06, BIOS32 rev. 0 @
0xffe90
pcibios0 at bios0: rev 2.1 @ 0xf/0x1
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfb790/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371 ISA and IDE"
rev
0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc/0xf800! 0xcf800/0x800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 915GM/PM/GMS Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 915GM/GMS Video" rev 0x03:
aperture at 0xdff0, size 0x800
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 915GM/GMS Video" rev 0x03 at pci0 dev 2 function 1 not configured
"Intel 82801FB HD Audio" rev 0x03 at pci0 dev 27 function 0 not
configured
ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 3 "Intel 82801FB PCIE" rev 0x03
pci2 at ppb1 bus 2
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 9
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 7
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 11
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3
pci3 at ppb2 bus 3
bce0 at pci3 dev 0 function 0 "Broadcom BCM4401B0" rev 0x02: irq 9,
address 00:14:22:97:85:e0
bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0
vendor "Broadcom", unknown product 0x4318 (class network subclass
miscellaneous, rev 0x02) at pci3 dev 3 function 0 not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0:
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0
Re: X11 Issue - Integrated Intel Media Accelerator 900 Graphics (Intel 915GM)
On Sun, Apr 09, 2006 at 05:00:39PM -0400, d 269330400 wrote: > I recently installed OpenBSD 3.8 (I haven't received my 3.9 CD in the > mail yet), and am having problems getting X to work (among other > things). > > It's a Dell Inspiron 1300 notebook w/ Integrated Intel Media > Accelerator 900 Graphics (Intel 915GM). The full dmesg is below. > > So, quick question. I noticed the following bullet on the OpenBSD 3.9 > release page. Could this be my problem? That is, is it referring to > the same Intel 915 as my graphics? Clueless, I know - sorry. > > - Support the Intel i915 AGP > pchb0 at pci0 dev 0 function 0 "Intel 915GM/PM/GMS Host" rev 0x03 > vga1 at pci0 dev 2 function 0 "Intel 915GM/GMS Video" rev 0x03: > aperture at 0xdff0, size 0x800 > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) > wsdisplay0: screen 1-5 added (80x25, vt100 emulation) > "Intel 915GM/GMS Video" rev 0x03 at pci0 dev 2 function 1 not configured > "Intel 82801FB HD Audio" rev 0x03 at pci0 dev 27 function 0 not configured Well, whatever you have is obviously not supported, FWIW. Since (almost?) any modern i386-based video card uses AGP, I'm pretty certain it's the same. A quick search also suggest recent developments in various Open Source projects around this card, which further supports this idea. Wait for 3.9? Or just stick to console mode for now. Joachim
X11 Issue - Integrated Intel Media Accelerator 900 Graphics (Intel 915GM)
I recently installed OpenBSD 3.8 (I haven't received my 3.9 CD in the
mail yet), and am having problems getting X to work (among other
things).
It's a Dell Inspiron 1300 notebook w/ Integrated Intel Media
Accelerator 900 Graphics (Intel 915GM). The full dmesg is below.
So, quick question. I noticed the following bullet on the OpenBSD 3.9
release page. Could this be my problem? That is, is it referring to
the same Intel 915 as my graphics? Clueless, I know - sorry.
- Support the Intel i915 AGP
I've tried following the instructions in /usr/X11R6/README, using the
various X wizards (xorgcfg, xorgconfig, xf86config3), and
/etc/sysctl.conf has machdep.allowaperture set to 2 because I answered
yes to the X question during the install.
I also tried copying over the XF86Config and XF86Config-4 files that
were generated by a KNOPPIX live-CD that worked on the same box, but
that didn't work either.
Thanks.
--d
OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005
[EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M processor 1.40GHz ("GenuineIntel"
686-class) 1.40 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,ACPI
,MMX,FXSR,SSE,SSE2,SS,TM,SBF
real mem = 527880192 (515508K)
avail mem = 474746880 (463620K)
using 4278 buffers containing 26497024 bytes (25876K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 01/24/06, BIOS32 rev. 0 @ 0xffe90
pcibios0 at bios0: rev 2.1 @ 0xf/0x1
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfb790/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371 ISA and IDE" rev
0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc/0xf800! 0xcf800/0x800
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 915GM/PM/GMS Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 915GM/GMS Video" rev 0x03:
aperture at 0xdff0, size 0x800
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 915GM/GMS Video" rev 0x03 at pci0 dev 2 function 1 not configured
"Intel 82801FB HD Audio" rev 0x03 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 3 "Intel 82801FB PCIE" rev 0x03
pci2 at ppb1 bus 2
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 9
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 7
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 11
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3
pci3 at ppb2 bus 3
bce0 at pci3 dev 0 function 0 "Broadcom BCM4401B0" rev 0x02: irq 9,
address 00:14:22:97:85:e0
bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0
vendor "Broadcom", unknown product 0x4318 (class network subclass
miscellaneous, rev 0x02) at pci3 dev 3 function 0 not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0:
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: SCSI0
5/cdrom removable
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
cd0(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0:
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
biomask effd netmask effd ttymask
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
OpenBSD 3.8 (GENERIC) #
