hello,
recently I've started using amd64 a bit more on my laptop because
until now I do not tested it very well. I'm facing a irq problem under
amd64/mp (amd64/up is ok) that prevents me to use the ethernet when
the cardbus is in use. for now the only way to be able to use msk0 is
to disable cbb at boot.
suggestions/pointers on the topic?
thanks,
OpenBSD 4.2-current (GENERIC.MP) #0: Mon Dec 3 01:57:10 MST 2007
[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
any sreal mem = 1063448576 (1014MB)
avail mem = 1020919808 (973MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xdc010 (18 entries)
bios0: vendor Phoenix Technologies LTD version "R0034J4" date 02/26/2007
bios0: Sony Corporation VGN-C1S_H
acpi0 at mainbus0: rev 0
acpi0: tables DSDT FACP APIC MCFG APIC BOOT SSDT SSDT
acpi0: wakeup devices PWRB(S4) PXS1(S3) PXS2(S3) PXS3(S3) PXS4(S3)
USB1(S3) USB2(S3) USB3(S3) USB4(S3) USB7(S3) LANC(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz, 1662.76 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CX16,xTPR,NXE,LONG
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: apic clock running at 166MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz, 1662.50 MHz
cpu1:FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CX16,xTPR,NXE,LONG
cpu1: 2MB 64b/line 8-way L2 cache
ioapic0 at mainbus0 apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEGP)
acpiprt2 at acpi0: bus 2 (RP01)
acpiprt3 at acpi0: bus 4 (RP02)
acpiprt4 at acpi0: bus 6 (RP03)
acpiprt5 at acpi0: bus 8 (RP04)
acpiprt6 at acpi0: bus 10 (PCIB)
acpiec0 at acpi0
acpicpu0 at acpi0: C3, C2
acpicpu1 at acpi0: C3, C2
acpitz0 at acpi0: critical temperature 105 degC
acpitz1 at acpi0: critical temperature 105 degC
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 not present
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpidock at acpi0 not configured
cpu0: unknown Enhanced SpeedStep CPU, msr 0x06130a2a06000a2a
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 1667 MHz (1372 mV): speeds: 1667, 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel 82945GM MCH" rev 0x03
agp0 at pchb0: aperture at 0xb0000000, size 0x10000000
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02:
apic 1 int 22 (irq 4)
azalia0: codec[s]: Realtek/0x0262, Conexant/0x2c06, using Realtek/0x0262
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 1
int 17 (irq 3)
pci1 at ppb0 bus 2
mskc0 at pci1 dev 0 function 0 "Marvell Yukon 88E8036" rev 0x13,
Yukon-2 FE (0x1): apic 1 int 16 (irq 7)
msk0 at mskc0 port A: address 00:13:a9:60:1b:eb
eephy0 at msk0 phy 0: Marvell 88E3082 10/100 PHY, rev. 3
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 1
int 16 (irq 7)
pci2 at ppb1 bus 4
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 1
int 18 (irq 11)
pci3 at ppb2 bus 6
wpi0 at pci3 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02:
apic 1 int 18 (irq 11), MoW2, address 00:18:de:ad:3e:96
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 1
int 21 (irq 10)
pci4 at ppb3 bus 8
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1
int 23 (irq 5)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1
int 17 (irq 3)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1
int 18 (irq 11)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1
int 16 (irq 7)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1
int 23 (irq 5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci5 at ppb4 bus 10
cbb0 at pci5 dev 3 function 0 "TI PCIXX12 CardBus" rev 0x00: apic 1
int 16 (irq 255)
"TI PCIXX12 FireWire" rev 0x00 at pci5 dev 3 function 1 not configured
"TI PCIXX12 Multimedia Card Reader" rev 0x00 at pci5 dev 3 function 2
not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 0 device 0 cacheline 0x10, lattimer 0x20
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <PIONEER, DVD-RW DVR-K16M, 1.10> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 1 int 19 (irq 10) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <HTS541010G9SA00>
wd0: 16-sector PIO, LBA48, 95396MB, 195371568 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic
1 int 19 (irq 10)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM
spdmem1 at iic0 addr 0x52: 512MB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
umass0 at uhub0 port 6 configuration 1 interface 0 "Sony UMH-U09" rev
2.00/4.52 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <Sony, USB HS-CARD, 4.52> SCSI0 0/direct removable
sd0: 61MB, 7 cyl, 255 head, 63 sec, 512 bytes/sec, 125440 sec total
softraid0 at root
dkcsum: wd0 matches BIOS drive 0x81
dkcsum: sd0 matches BIOS drive 0x80
root on wd0a swap on wd0b dump on wd0b
--
see ya,
giovanni
