Re: [SOLVED] Re: apu2 em0/dhclient problems
Edgar Pettijohn [ed...@pettijohn-web.com] wrote: > > Don't know why it works, but em1 works. I guess I'll rewrite my config files. > This shouldn't be an acceptable solution to you. Unless the port is physically damaged, you should figure out what's going on. Tcpdump is a great start. Chris
[SOLVED] Re: apu2 em0/dhclient problems
On Tue, Jan 29, 2019 at 12:03:23PM -0600, Edgar Pettijohn wrote: > > On Jan 29, 2019 11:01 AM, Marcus MERIGHI wrote: > > > > Hello, > > > > ed...@pettijohn-web.com (Edgar Pettijohn), 2019.01.27 (Sun) 18:44 (CET): > > > I'm trying to replace my dieing soekris box with an apu2 dmesg below. > > > However, I can't seem to get em0 to connect to my isp. It will work > > > when connecting to the soekris box though. So I don't think its the > > > interface that is the problem. But everything I try seems to rule out > > > eachother as the problem, leaving me in a viscious cycle. > > > > have you tried any of the other ethernet ports with your uplink? > > > > I haven't. I did consider it, but then em0 worked when connecting to my > router so I didn't. I guess it can't hurt to try anyway. > > Thanks, > > Edgar > > Give it a go, I've had a similiar failure with em0 on apu2, running > > with em1 for the uplink since then without problems. > > > > Marcus Don't know why it works, but em1 works. I guess I'll rewrite my config files. Thanks, Edgar > > > > > I'm going to try disabling pf and after that current. If you have > > > any other suggestions please send them. > > > > > > Thanks, > > > > > > edgar > > > > > > OpenBSD 6.4 (GENERIC.MP) #364: Thu Oct 11 13:30:23 MDT 2018 > > > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > > real mem = 1996152832 (1903MB) > > > avail mem = 1926434816 (1837MB) > > > mpath0 at root > > > scsibus0 at mpath0: 256 targets > > > mainbus0 at root > > > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0x77fb7020 (7 entries) > > > bios0: vendor coreboot version "4.0.7" date 02/28/2017 > > > bios0: PC Engines APU2 > > > acpi0 at bios0: rev 2 > > > acpi0: sleep states S0 S1 S2 S3 S4 S5 > > > acpi0: tables DSDT FACP SSDT APIC HEST SSDT SSDT HPET > > > acpi0: wakeup devices PWRB(S4) PBR4(S4) PBR5(S4) PBR6(S4) PBR7(S4) > > > PBR8(S4) UOH1(S3) UOH3(S3) UOH5(S3) XHC0(S4) > > > acpitimer0 at acpi0: 3579545 Hz, 32 bits > > > acpimadt0 at acpi0 addr 0xfee0: PC-AT compat > > > cpu0 at mainbus0: apid 0 (boot processor) > > > cpu0: AMD GX-412TC SOC, 998.27 MHz, 16-30-01 > > > cpu0: > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT > > > cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB > > > 64b/line 16-way L2 cache > > > cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully > > > associative > > > cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully > > > associative > > > cpu0: smt 0, core 0, package 0 > > > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > > > cpu0: apic clock running at 99MHz > > > cpu0: mwait min=64, max=64, IBE > > > cpu1 at mainbus0: apid 1 (application processor) > > > cpu1: AMD GX-412TC SOC, 998.13 MHz, 16-30-01 > > > cpu1: > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT > > > cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB > > > 64b/line 16-way L2 cache > > > cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully > > > associative > > > cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully > > > associative > > > cpu1: smt 0, core 1, package 0 > > > cpu2 at mainbus0: apid 2 (application processor) > > > cpu2: AMD GX-412TC SOC, 998.13 MHz, 16-30-01 > > > cpu2: > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT > > > cpu2: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB > > > 64b/line 16-way L2 cache > > > cpu2: ITLB 32 4KB entries fully associative, 8 4MB entries fully > > > associative > > > cpu2: DTLB 40 4KB entries fully associative, 8 4MB entries fully > > > associative > > > cpu2: smt 0, core 2, package 0 > > > cpu3 at mainbus0: apid 3 (application processor) > > > cpu3: AMD GX-412TC SOC, 998.13 MHz, 16-30-01 > > > cpu3: > > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT > > > cpu3: 32KB 64b/line 2-way I-cache, 3
Re: apu2 em0/dhclient problems
On Jan 29, 2019 11:01 AM, Marcus MERIGHI wrote: > > Hello, > > ed...@pettijohn-web.com (Edgar Pettijohn), 2019.01.27 (Sun) 18:44 (CET): > > I'm trying to replace my dieing soekris box with an apu2 dmesg below. > > However, I can't seem to get em0 to connect to my isp. It will work > > when connecting to the soekris box though. So I don't think its the > > interface that is the problem. But everything I try seems to rule out > > eachother as the problem, leaving me in a viscious cycle. > > have you tried any of the other ethernet ports with your uplink? > I haven't. I did consider it, but then em0 worked when connecting to my router so I didn't. I guess it can't hurt to try anyway. Thanks, Edgar > Give it a go, I've had a similiar failure with em0 on apu2, running > with em1 for the uplink since then without problems. > > Marcus > > > I'm going to try disabling pf and after that current. If you have > > any other suggestions please send them. > > > > Thanks, > > > > edgar > > > > OpenBSD 6.4 (GENERIC.MP) #364: Thu Oct 11 13:30:23 MDT 2018 > > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > > real mem = 1996152832 (1903MB) > > avail mem = 1926434816 (1837MB) > > mpath0 at root > > scsibus0 at mpath0: 256 targets > > mainbus0 at root > > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0x77fb7020 (7 entries) > > bios0: vendor coreboot version "4.0.7" date 02/28/2017 > > bios0: PC Engines APU2 > > acpi0 at bios0: rev 2 > > acpi0: sleep states S0 S1 S2 S3 S4 S5 > > acpi0: tables DSDT FACP SSDT APIC HEST SSDT SSDT HPET > > acpi0: wakeup devices PWRB(S4) PBR4(S4) PBR5(S4) PBR6(S4) PBR7(S4) PBR8(S4) > > UOH1(S3) UOH3(S3) UOH5(S3) XHC0(S4) > > acpitimer0 at acpi0: 3579545 Hz, 32 bits > > acpimadt0 at acpi0 addr 0xfee0: PC-AT compat > > cpu0 at mainbus0: apid 0 (boot processor) > > cpu0: AMD GX-412TC SOC, 998.27 MHz, 16-30-01 > > cpu0: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT > > cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB > > 64b/line 16-way L2 cache > > cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative > > cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative > > cpu0: smt 0, core 0, package 0 > > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > > cpu0: apic clock running at 99MHz > > cpu0: mwait min=64, max=64, IBE > > cpu1 at mainbus0: apid 1 (application processor) > > cpu1: AMD GX-412TC SOC, 998.13 MHz, 16-30-01 > > cpu1: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT > > cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB > > 64b/line 16-way L2 cache > > cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative > > cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative > > cpu1: smt 0, core 1, package 0 > > cpu2 at mainbus0: apid 2 (application processor) > > cpu2: AMD GX-412TC SOC, 998.13 MHz, 16-30-01 > > cpu2: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT > > cpu2: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB > > 64b/line 16-way L2 cache > > cpu2: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative > > cpu2: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative > > cpu2: smt 0, core 2, package 0 > > cpu3 at mainbus0: apid 3 (application processor) > > cpu3: AMD GX-412TC SOC, 998.13 MHz, 16-30-01 > > cpu3: > > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT > > cpu3: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB > > 64b/line 16-way L2 cache > > cpu3: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative > > cpu3: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative > > cpu3: smt 0, core 3, package 0 > > ioapic0 at mainbus0: apid 4 pa 0xfec0, version 21, 24 pins > > ioapic1 at mainbus0: apid 5 pa 0xfec2
Re: apu2 em0/dhclient problems
Hello, ed...@pettijohn-web.com (Edgar Pettijohn), 2019.01.27 (Sun) 18:44 (CET): > I'm trying to replace my dieing soekris box with an apu2 dmesg below. > However, I can't seem to get em0 to connect to my isp. It will work > when connecting to the soekris box though. So I don't think its the > interface that is the problem. But everything I try seems to rule out > eachother as the problem, leaving me in a viscious cycle. have you tried any of the other ethernet ports with your uplink? Give it a go, I've had a similiar failure with em0 on apu2, running with em1 for the uplink since then without problems. Marcus > I'm going to try disabling pf and after that current. If you have > any other suggestions please send them. > > Thanks, > > edgar > > OpenBSD 6.4 (GENERIC.MP) #364: Thu Oct 11 13:30:23 MDT 2018 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 1996152832 (1903MB) > avail mem = 1926434816 (1837MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0x77fb7020 (7 entries) > bios0: vendor coreboot version "4.0.7" date 02/28/2017 > bios0: PC Engines APU2 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S1 S2 S3 S4 S5 > acpi0: tables DSDT FACP SSDT APIC HEST SSDT SSDT HPET > acpi0: wakeup devices PWRB(S4) PBR4(S4) PBR5(S4) PBR6(S4) PBR7(S4) PBR8(S4) > UOH1(S3) UOH3(S3) UOH5(S3) XHC0(S4) > acpitimer0 at acpi0: 3579545 Hz, 32 bits > acpimadt0 at acpi0 addr 0xfee0: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: AMD GX-412TC SOC, 998.27 MHz, 16-30-01 > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT > cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 64b/line > 16-way L2 cache > cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative > cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: apic clock running at 99MHz > cpu0: mwait min=64, max=64, IBE > cpu1 at mainbus0: apid 1 (application processor) > cpu1: AMD GX-412TC SOC, 998.13 MHz, 16-30-01 > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT > cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 64b/line > 16-way L2 cache > cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative > cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0: apid 2 (application processor) > cpu2: AMD GX-412TC SOC, 998.13 MHz, 16-30-01 > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT > cpu2: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 64b/line > 16-way L2 cache > cpu2: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative > cpu2: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative > cpu2: smt 0, core 2, package 0 > cpu3 at mainbus0: apid 3 (application processor) > cpu3: AMD GX-412TC SOC, 998.13 MHz, 16-30-01 > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT > cpu3: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 64b/line > 16-way L2 cache > cpu3: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative > cpu3: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative > cpu3: smt 0, core 3, package 0 > ioapic0 at mainbus0: apid 4 pa 0xfec0, version 21, 24 pins > ioapic1 at mainbus0: apid 5 pa 0xfec2, version 21, 32 pins, remapped > acpihpet0 at acpi0: 14318180 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (PBR4) > acpiprt2 at acpi0: bus 1 (PBR5) > acpiprt3 at acpi0: bus 2 (PBR6) > acpiprt4 at acpi0: bus 3 (PBR7) > acpiprt5 at acpi0: bus 4 (PBR8) > acpicpu0 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS > acpicpu1 at acpi0: C2(0@
Re: apu2 em0/dhclient problems
On 27/01/2019 1:44 p.m., Edgar Pettijohn wrote: On Sun, Jan 27, 2019 at 09:34:54PM +0100, Mikkel C. Simonsen wrote: Den 27-01-2019 kl. 19:45 skrev trondd: On Sun, January 27, 2019 12:44 pm, Edgar Pettijohn wrote: I'm trying to replace my dieing soekris box with an apu2 dmesg below. However, I can't seem to get em0 to connect to my isp. It will work when connecting to the soekris box though. So I don't think its the interface that is the problem. But everything I try seems to rule out eachother as the problem, leaving me in a viscious cycle. I'm going to try disabling pf and after that current. If you have any other suggestions please send them. Thanks, edgar Does your ISP whitelist by MAC address? My ISP locks the connection to a certain MAC for a number of hours. Tech support can probably delete the old lease. Best regards, Mikkel I don't think this is the case. I was able to connect directly to my laptop and get a lease immediately. Its odd... With base dhclient it goes something like: em0 no link em0. got link and then nothing. I installed isc-dhcp-client and it actually goes through the steps of the whole DHCPDISCOVER...etc,etc. Unfortunantly it still ends with me not having a connection. I doubt it will do anything, but I'm going to try updating the bios. Sort of like checking the oil when the problem is a flat tire, but who knows. Thanks, edgar Hi, I just upgraded my APU2 yesterday and have no problems with my dhcp. I have a cable internet connection through my ISP. Do you have a /etc/dhclient.conf file? I do not. Perhaps try killing dhclient, then run it in debugging mode in the foreground. /sbin/dhclient -i em0 -d -v See what happens. My /etc/hostname.em0 just has "dhcp" in it. Here's some information from my system: OpenBSD 6.4 (GENERIC.MP) #364: Thu Oct 11 13:30:23 MDT 2018 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 4261072896 (4063MB) avail mem = 4122664960 (3931MB) bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdffb7020 (7 entries) bios0: vendor coreboot version "88a4f96" date 03/07/2016 bios0: PC Engines apu2 em0 at pci1 dev 0 function 0 "Intel I210" rev 0x03: msi, address 00:0d:b9:44:62:7c pcengine# ifconfig em0 em0: flags=8843 mtu 1500 lladdr 00:0d:b9:44:62:7c index 1 priority 0 llprio 3 groups: egress media: Ethernet autoselect (1000baseT full-duplex,master) status: active inet a.b.c.d netmask 0xffc0 broadcast a.b.c.something You might also try running tcpdump while the dhcp is going on and watch the packet trace. At a minimum, you could post the packet trace here for imput. tcpdump -i em0 Cheers, Steve W.
Re: apu2 em0/dhclient problems
Den 27-01-2019 kl. 19:45 skrev trondd: On Sun, January 27, 2019 12:44 pm, Edgar Pettijohn wrote: I'm trying to replace my dieing soekris box with an apu2 dmesg below. However, I can't seem to get em0 to connect to my isp. It will work when connecting to the soekris box though. So I don't think its the interface that is the problem. But everything I try seems to rule out eachother as the problem, leaving me in a viscious cycle. I'm going to try disabling pf and after that current. If you have any other suggestions please send them. Thanks, edgar Does your ISP whitelist by MAC address? My ISP locks the connection to a certain MAC for a number of hours. Tech support can probably delete the old lease. Best regards, Mikkel
Re: apu2 em0/dhclient problems
On Sun, Jan 27, 2019 at 09:34:54PM +0100, Mikkel C. Simonsen wrote: > Den 27-01-2019 kl. 19:45 skrev trondd: > > On Sun, January 27, 2019 12:44 pm, Edgar Pettijohn wrote: > > > I'm trying to replace my dieing soekris box with an apu2 dmesg below. > > > However, I can't seem to get em0 to connect to my isp. It will work > > > when connecting to the soekris box though. So I don't think its the > > > interface that is the problem. But everything I try seems to rule out > > > eachother as the problem, leaving me in a viscious cycle. > > > > > > I'm going to try disabling pf and after that current. If you have > > > any other suggestions please send them. > > > > > > Thanks, > > > > > > edgar > > > > Does your ISP whitelist by MAC address? > > My ISP locks the connection to a certain MAC for a number of hours. Tech > support can probably delete the old lease. > > Best regards, > > Mikkel > I don't think this is the case. I was able to connect directly to my laptop and get a lease immediately. Its odd... With base dhclient it goes something like: em0 no link em0. got link and then nothing. I installed isc-dhcp-client and it actually goes through the steps of the whole DHCPDISCOVER...etc,etc. Unfortunantly it still ends with me not having a connection. I doubt it will do anything, but I'm going to try updating the bios. Sort of like checking the oil when the problem is a flat tire, but who knows. Thanks, edgar
Re: apu2 em0/dhclient problems
On Sun, January 27, 2019 12:44 pm, Edgar Pettijohn wrote: > I'm trying to replace my dieing soekris box with an apu2 dmesg below. > However, I can't seem to get em0 to connect to my isp. It will work > when connecting to the soekris box though. So I don't think its the > interface that is the problem. But everything I try seems to rule out > eachother as the problem, leaving me in a viscious cycle. > > I'm going to try disabling pf and after that current. If you have > any other suggestions please send them. > > Thanks, > > edgar Does your ISP whitelist by MAC address? > > OpenBSD 6.4 (GENERIC.MP) #364: Thu Oct 11 13:30:23 MDT 2018 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 1996152832 (1903MB) > avail mem = 1926434816 (1837MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0x77fb7020 (7 entries) > bios0: vendor coreboot version "4.0.7" date 02/28/2017 > bios0: PC Engines APU2 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S1 S2 S3 S4 S5 > acpi0: tables DSDT FACP SSDT APIC HEST SSDT SSDT HPET > acpi0: wakeup devices PWRB(S4) PBR4(S4) PBR5(S4) PBR6(S4) PBR7(S4) > PBR8(S4) UOH1(S3) UOH3(S3) UOH5(S3) XHC0(S4) > acpitimer0 at acpi0: 3579545 Hz, 32 bits > acpimadt0 at acpi0 addr 0xfee0: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: AMD GX-412TC SOC, 998.27 MHz, 16-30-01 > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT > cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB > 64b/line 16-way L2 cache > cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully > associative > cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully > associative > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges > cpu0: apic clock running at 99MHz > cpu0: mwait min=64, max=64, IBE > cpu1 at mainbus0: apid 1 (application processor) > cpu1: AMD GX-412TC SOC, 998.13 MHz, 16-30-01 > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT > cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB > 64b/line 16-way L2 cache > cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully > associative > cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully > associative > cpu1: smt 0, core 1, package 0 > cpu2 at mainbus0: apid 2 (application processor) > cpu2: AMD GX-412TC SOC, 998.13 MHz, 16-30-01 > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT > cpu2: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB > 64b/line 16-way L2 cache > cpu2: ITLB 32 4KB entries fully associative, 8 4MB entries fully > associative > cpu2: DTLB 40 4KB entries fully associative, 8 4MB entries fully > associative > cpu2: smt 0, core 2, package 0 > cpu3 at mainbus0: apid 3 (application processor) > cpu3: AMD GX-412TC SOC, 998.13 MHz, 16-30-01 > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT > cpu3: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB > 64b/line 16-way L2 cache > cpu3: ITLB 32 4KB entries fully associative, 8 4MB entries fully > associative > cpu3: DTLB 40 4KB entries fully associative, 8 4MB entries fully > associative > cpu3: smt 0, core 3, package 0 > ioapic0 at mainbus0: apid 4 pa 0xfec0, version 21, 24 pins > ioapic1 at mainbus0: apid 5 pa 0xfec2, version 21, 32 pins, remapped > acpihpet0 at acpi0: 14318180 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (PBR4) > acpiprt2 at acpi0: bus 1 (PBR5) > acpiprt3 at acpi0: bus 2 (PBR6) > acpiprt4 at acpi0: bus 3 (PBR7) > acpiprt5 at acpi0: bus 4 (PBR8) > acpicpu0 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS > acpicpu1 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS > acpicpu2 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS > acpicpu3 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS > acpibtn0 at acpi0:
apu2 em0/dhclient problems
I'm trying to replace my dieing soekris box with an apu2 dmesg below. However, I can't seem to get em0 to connect to my isp. It will work when connecting to the soekris box though. So I don't think its the interface that is the problem. But everything I try seems to rule out eachother as the problem, leaving me in a viscious cycle. I'm going to try disabling pf and after that current. If you have any other suggestions please send them. Thanks, edgar OpenBSD 6.4 (GENERIC.MP) #364: Thu Oct 11 13:30:23 MDT 2018 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 1996152832 (1903MB) avail mem = 1926434816 (1837MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0x77fb7020 (7 entries) bios0: vendor coreboot version "4.0.7" date 02/28/2017 bios0: PC Engines APU2 acpi0 at bios0: rev 2 acpi0: sleep states S0 S1 S2 S3 S4 S5 acpi0: tables DSDT FACP SSDT APIC HEST SSDT SSDT HPET acpi0: wakeup devices PWRB(S4) PBR4(S4) PBR5(S4) PBR6(S4) PBR7(S4) PBR8(S4) UOH1(S3) UOH3(S3) UOH5(S3) XHC0(S4) acpitimer0 at acpi0: 3579545 Hz, 32 bits acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: AMD GX-412TC SOC, 998.27 MHz, 16-30-01 cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 64b/line 16-way L2 cache cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 99MHz cpu0: mwait min=64, max=64, IBE cpu1 at mainbus0: apid 1 (application processor) cpu1: AMD GX-412TC SOC, 998.13 MHz, 16-30-01 cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 64b/line 16-way L2 cache cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative cpu1: smt 0, core 1, package 0 cpu2 at mainbus0: apid 2 (application processor) cpu2: AMD GX-412TC SOC, 998.13 MHz, 16-30-01 cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT cpu2: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 64b/line 16-way L2 cache cpu2: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative cpu2: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative cpu2: smt 0, core 2, package 0 cpu3 at mainbus0: apid 3 (application processor) cpu3: AMD GX-412TC SOC, 998.13 MHz, 16-30-01 cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT cpu3: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 64b/line 16-way L2 cache cpu3: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative cpu3: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative cpu3: smt 0, core 3, package 0 ioapic0 at mainbus0: apid 4 pa 0xfec0, version 21, 24 pins ioapic1 at mainbus0: apid 5 pa 0xfec2, version 21, 32 pins, remapped acpihpet0 at acpi0: 14318180 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PBR4) acpiprt2 at acpi0: bus 1 (PBR5) acpiprt3 at acpi0: bus 2 (PBR6) acpiprt4 at acpi0: bus 3 (PBR7) acpiprt5 at acpi0: bus 4 (PBR8) acpicpu0 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS acpicpu1 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS acpicpu2 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS acpicpu3 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS acpibtn0 at acpi0: PWRB acpicmos0 at acpi0 cpu0: 998 MHz: speeds: 1000 800 600 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "AMD AMD64 16h Root Complex" rev 0x00 pchb1 at pci0 dev 2 function 0 "AMD AMD64 16h Host" rev 0x00 ppb0 at pci0 dev 2 function 2 "AMD AMD64 16h PCIE"
