Re: bgpd network connected

[Matt Schwartz]

It looks like I spoke too soon because routes are not being added at all
when using rdomains. It doesn't matter if I use network inet connected or
specify network x.x.x.x/x, the rib comes up empty for the rdomain. Bgpctl
won't let you inject routes into a different routing table other than the
default. Frustrating because I'm so close to getting BGP MPLS VPN to work.
Of course it still could be me but I've looked at this 6 ways to Saturday
and I'm at a loss.

> On Mar 9, 2016 6:00 AM, "Tony Sarendal" wrote:
>
> >
> >
> > 2016-03-08 15:38 GMT+01:00 Matt Schwartz:
> >>
> >> I did not even know it was broken?
> >>
> >> On Mar 8, 2016 1:26 AM, "Tony Sarendal" wrote:
> >> >
> >> > Is there any chance of getting "network inet connected" fixed to 5.9
?
> >> >
> >> > Regards Tony
> >>
> >
> >
> > Adding a new vlan interface:
> >
> > beer# cat /etc/bgpd.conf
> > AS 65001
> > network inet connected
> > beer# bgpctl show rib
> > flags: * = Valid, > = Selected, I = via IBGP, A = Announced, S = Stale
> > origin: i = IGP, e = EGP, ? = Incomplete
> >
> > flags destination  gateway  lpref   med aspath origin
> > AI*>  172.29.1.0/240.0.0.0100 0 i
> > beer# ifconfig vlan69 create
> > beer# ifconfig vlan69 1.1.1.1/30 vlandev em0 vlan 69 up
> > beer# bgpctl show rib
> > flags: * = Valid, > = Selected, I = via IBGP, A = Announced, S = Stale
> > origin: i = IGP, e = EGP, ? = Incomplete
> >
> > flags destination  gateway  lpref   med aspath origin
> > AI*>  172.29.1.0/240.0.0.0100 0 i
> > beer# /etc/rc.d/bgpd restart
> > beer# bgpctl show rib
> > flags: * = Valid, > = Selected, I = via IBGP, A = Announced, S = Stale
> > origin: i = IGP, e = EGP, ? = Incomplete
> >
> > flags destination  gateway  lpref   med aspath origin
> > AI*>  1.1.1.0/30   0.0.0.0100 0 i
> > AI*>  172.29.1.0/240.0.0.0100 0 i
> > beer#
> >
> >
> > Regards Tony

Re: bgpd network connected

[Tony Sarendal]

2016-03-08 15:38 GMT+01:00 Matt Schwartz :

> I did not even know it was broken?
>
> On Mar 8, 2016 1:26 AM, "Tony Sarendal" wrote:
> >
> > Is there any chance of getting "network inet connected" fixed to 5.9 ?
> >
> > Regards Tony
>
>

Adding a new vlan interface:

beer# cat /etc/bgpd.conf
AS 65001
network inet connected
beer# bgpctl show rib
flags: * = Valid, > = Selected, I = via IBGP, A = Announced, S = Stale
origin: i = IGP, e = EGP, ? = Incomplete

flags destination  gateway  lpref   med aspath origin
AI*>  172.29.1.0/240.0.0.0100 0 i
beer# ifconfig vlan69 create
beer# ifconfig vlan69 1.1.1.1/30 vlandev em0 vlan 69 up
beer# bgpctl show rib
flags: * = Valid, > = Selected, I = via IBGP, A = Announced, S = Stale
origin: i = IGP, e = EGP, ? = Incomplete

flags destination  gateway  lpref   med aspath origin
AI*>  172.29.1.0/240.0.0.0100 0 i
beer# /etc/rc.d/bgpd restart
beer# bgpctl show rib
flags: * = Valid, > = Selected, I = via IBGP, A = Announced, S = Stale
origin: i = IGP, e = EGP, ? = Incomplete

flags destination  gateway  lpref   med aspath origin
AI*>  1.1.1.0/30   0.0.0.0100 0 i
AI*>  172.29.1.0/240.0.0.0100 0 i
beer#


Regards Tony

Re: bgpd network connected

[Matt Schwartz]

I did not even know it was broken?

On Mar 8, 2016 1:26 AM, "Tony Sarendal" wrote:
>
> Is there any chance of getting "network inet connected" fixed to 5.9 ?
>
> Regards Tony

bgpd network connected

[Tony Sarendal]

Is there any chance of getting "network inet connected" fixed to 5.9 ?

Regards Tony

5.8 bgpd, network connected behaves like 5.6

[Tony Sarendal]

"network inet connected" does not pick up new vlan interfaces, same problem
as 5.6.

bmr0.esp1# ifconfig vlan69 create
bmr0.esp1# ifconfig vlan69 vlandev trunk0 vlan 69 up
bmr0.esp1# ifconfig vlan69 1.1.1.1/30
bmr0.esp1# bgpctl show rib 1.1.1.1
flags: * = Valid, > = Selected, I = via IBGP, A = Announced, S = Stale
origin: i = IGP, e = EGP, ? = Incomplete

flags destination  gateway  lpref   med aspath origin
bmr0.esp1# bgpctl show int
Interface  Nexthop state  Flags  Link state
vlan69 ok UP Ethernet, active
vlan105ok UP Ethernet, active
vlan104ok UP Ethernet, active
gre0   ok UP unknown
pflog0 ok UP unknown
vlan103ok UP Ethernet, active
trunk0 ok UP Ethernet, active
lo1ok UP unknown
lo0ok UP unknown
enc0   invalid   active
ix1ok UP active, 10 GBit/s
ix0ok UP active, 10 GBit/s
bmr0.esp1#

As with 5.6, restarting bgpd fixes it:
bmr0.esp1# /etc/rc.d/bgpd restart
bgpd(ok)
bgpd(ok)
bmr0.esp1# bgpctl show rib 1.1.1.1
flags: * = Valid, > = Selected, I = via IBGP, A = Announced, S = Stale
origin: i = IGP, e = EGP, ? = Incomplete

flags destination  gateway  lpref   med aspath origin
AI*>  1.1.1.0/30   0.0.0.0100 0 i
bmr0.esp1#


Any chance of getting a fix into -stable 5.8 ?

/T

OpenBSD 5.8-stable (GENERIC.MP) #16: Tue Dec  8 10:44:35 CET 2015
r...@obc0.rad.unibet.com:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 34300891136 (32711MB)
avail mem = 33257451520 (31716MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xec170 (34 entries)
bios0: vendor American Megatrends Inc. version "3.0" date 04/24/2015
bios0: Supermicro X10SLD
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC FPDT FIDT SSDT SSDT SSDT SSDT SSDT MCFG PRAD
HPET SSDT SSDT SPMI DMAR EINJ ERST HEST BERT
acpi0: wakeup devices PEGP(S4) PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4) PEG2(S4)
PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4)
PXSX(S4) RP05(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E3-1241 v3 @ 3.50GHz, 3500.42 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT
,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSB
ASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 100MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Xeon(R) CPU E3-1241 v3 @ 3.50GHz, 3500.01 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT
,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSB
ASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Xeon(R) CPU E3-1241 v3 @ 3.50GHz, 3500.01 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT
,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSB
ASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Xeon(R) CPU E3-1241 v3 @ 3.50GHz, 3500.01 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,SMX,EST,TM2,SSSE3,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT
,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,LONG,LAHF,ABM,PERF,ITSC,FSGSB
ASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
cpu4 at mainbus0: apid 1 (application processor)
cpu4: Intel(R) Xeon(R) CPU E3-1241 v3 @ 3.50GHz, 3500.01 MHz
cpu4:

Re: 5.8 bgpd, network connected behaves like 5.6

[Peter Hessler]

1) does "bgpctl reload" detect it?

2) does -current work as you expect?


On 2015 Dec 17 (Thu) at 09:38:45 +0100 (+0100), Tony Sarendal wrote:
:"network inet connected" does not pick up new vlan interfaces, same problem
:as 5.6.
:
:bmr0.esp1# ifconfig vlan69 create
:bmr0.esp1# ifconfig vlan69 vlandev trunk0 vlan 69 up
:bmr0.esp1# ifconfig vlan69 1.1.1.1/30
:bmr0.esp1# bgpctl show rib 1.1.1.1
:flags: * = Valid, > = Selected, I = via IBGP, A = Announced, S = Stale
:origin: i = IGP, e = EGP, ? = Incomplete
:
:flags destination  gateway  lpref   med aspath origin
:bmr0.esp1# bgpctl show int
:Interface  Nexthop state  Flags  Link state
:vlan69 ok UP Ethernet, active
:vlan105ok UP Ethernet, active
:vlan104ok UP Ethernet, active
:gre0   ok UP unknown
:pflog0 ok UP unknown
:vlan103ok UP Ethernet, active
:trunk0 ok UP Ethernet, active
:lo1ok UP unknown
:lo0ok UP unknown
:enc0   invalid   active
:ix1ok UP active, 10 GBit/s
:ix0ok UP active, 10 GBit/s
:bmr0.esp1#
:
:As with 5.6, restarting bgpd fixes it:
:bmr0.esp1# /etc/rc.d/bgpd restart
:bgpd(ok)
:bgpd(ok)
:bmr0.esp1# bgpctl show rib 1.1.1.1
:flags: * = Valid, > = Selected, I = via IBGP, A = Announced, S = Stale
:origin: i = IGP, e = EGP, ? = Incomplete
:
:flags destination  gateway  lpref   med aspath origin
:AI*>  1.1.1.0/30   0.0.0.0100 0 i
:bmr0.esp1#
:
:
:Any chance of getting a fix into -stable 5.8 ?
:
:/T

-- 
Support bacteria -- it's the only culture some people have!

Re: 5.8 bgpd, network connected behaves like 5.6

[Tony Sarendal]

2015-12-17 10:29 GMT+01:00 Peter Hessler :

> 1) does "bgpctl reload" detect it?
>
> 2) does -current work as you expect?
>
>
>
1. bgpctl reload does not make any difference.

2. A quick test on my -current workstation (not the same hardware, no
trunk) also fails to work.
-current from the 14th.

/T

delorean# cat /etc/bgpd.conf
AS 65001
network inet connected
network inet static

delorean# bgpctl show rib
flags: * = Valid, > = Selected, I = via IBGP, A = Announced, S = Stale
origin: i = IGP, e = EGP, ? = Incomplete

flags destination  gateway  lpref   med aspath origin
AI*>  10.96.5.0/24 0.0.0.0100 0
delorean# bgpctl show int
Interface  Nexthop state  Flags  Link state
pflog0 ok UP unknown
lo0ok UP unknown
enc0   invalid   active
em0ok UP Ethernet, active, 1000 MBit/s
delorean#
delorean#
delorean# ifconfig vlan69 create
delorean# ifconfig vlan69 vlandev em0 vlan 69 up
delorean# ifconfig vlan69 1.1.1.1/30
delorean#
delorean# bgpctl show rib
flags: * = Valid, > = Selected, I = via IBGP, A = Announced, S = Stale
origin: i = IGP, e = EGP, ? = Incomplete

flags destination  gateway  lpref   med aspath origin
AI*>  10.96.5.0/24 0.0.0.0100 0 i
delorean# bgpctl show int
Interface  Nexthop state  Flags  Link state
vlan69 ok UP Ethernet, active, 1000 MBit/s
pflog0 ok UP unknown
lo0ok UP unknown
enc0   invalid   active
em0ok UP Ethernet, active, 1000 MBit/s
delorean#
delorean#
delorean#
delorean# bgpctl reload
reload request sent.
request processed
delorean# bgpctl show rib
flags: * = Valid, > = Selected, I = via IBGP, A = Announced, S = Stale
origin: i = IGP, e = EGP, ? = Incomplete

flags destination  gateway  lpref   med aspath origin
AI*>  10.96.5.0/24 0.0.0.0100 0 i
delorean# bgpctl show int
Interface  Nexthop state  Flags  Link state
vlan69 ok UP Ethernet, active, 1000 MBit/s
pflog0 ok UP unknown
lo0ok UP unknown
enc0   invalid   active
em0ok UP Ethernet, active, 1000 MBit/s
delorean#
delorean#
delorean#
delorean# /etc/rc.d/bgpd restart
bgpd(ok)
bgpd(ok)
delorean# bgpctl show rib
flags: * = Valid, > = Selected, I = via IBGP, A = Announced, S = Stale
origin: i = IGP, e = EGP, ? = Incomplete

flags destination  gateway  lpref   med aspath origin
AI*>  1.1.1.0/30   0.0.0.0100 0 i
AI*>  10.96.5.0/24 0.0.0.0100 0 i
delorean# bgpctl show int
Interface  Nexthop state  Flags  Link state
vlan69 ok UP Ethernet, active, 1000 MBit/s
pflog0 ok UP unknown
lo0ok UP unknown
enc0   invalid   active
em0ok UP Ethernet, active, 1000 MBit/s
delorean#

OpenBSD 5.8-current (GENERIC.MP) #13: Mon Dec 14 12:11:14 CET 2015
r...@delorean.rad.unibet.com:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error d0
real mem = 4161183744 (3968MB)
avail mem = 4030943232 (3844MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe87ec (85 entries)
bios0: vendor Hewlett-Packard version "J01 v02.15" date 11/10/2011
bios0: Hewlett-Packard HP Compaq 8200 Elite SFF PC
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC SSDT MCFG HPET ASF! SSDT SLIC TCPA DMAR
acpi0: wakeup devices PS2K(S3) PS2M(S3) BR20(S4) EUSB(S3) USBE(S3) PEX0(S4)
PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4) PEX5(S4) PEX6(S4) PEX7(S4) GBE_(S4)
P0P1(S4) P0P2(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee0: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3293.46 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,A
ES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz, 3292.50 MHz
cpu1: