pcmcia malo(4) can't load firmware
I have a pcmcia malo(4) card that I would like to use, and when I plug it in it gives me malo0: timeout at boot firmware load!. The card is a NetGear WG511 v2, and yes, I did pkg_add the firmware. dmesg with acpi and MALO_DEBUG/CMALO_DEBUG defined below. -- On a paper submitted by a physicist colleague: This isn't right. This isn't even wrong. -- Wolfgang Pauli OpenBSD 4.1-current (ACPI) #3: Sat Jun 2 19:40:48 PDT 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/ACPI real mem = 2012672000 (1919MB) avail mem = 1931935744 (1842MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xfc68f (23 entries) bios0: Hewlett-Packard HP Compaq nx6125 (PZ895UA#ABA) acpi0 at mainbus0: rev 0 acpi0: tables DSDT FACP APIC MCFG SSDT acpitimer0 at acpi0: 3579545 Hz, 32 bits acpimadt0 at acpi0 addr 0xfec01000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: AMD Turion(tm) 64 Mobile ML-37 , 1995.33 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2 cache cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative cpu0: AMD erratum 89 present, BIOS upgrade may be required cpu0: apic clock running at 199MHz ioapic0 at mainbus0 apid 1 pa 0xfec0, version 21, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 1 acpiprt0 at acpi0: bus 1 (C048) acpiprt1 at acpi0: bus 2 (C0AB) acpiprt2 at acpi0: bus 0 (C047) acpiec0 at acpi0: C111 acpicpu at acpi0 not configured acpitz0 at acpi0, critical temperature: 94 degC acpitz1 at acpi0, critical temperature: 100 degC acpitz2 at acpi0, critical temperature: 100 degC acpibat0 at acpi0: C179: not present acpibat1 at acpi0: C178: not present acpiac0 at acpi0: AC unit online acpibtn0 at acpi0: C1F0 acpibtn1 at acpi0: C1F1 couldnt fetch acpicpu_softc cpu0: PowerNow! K8 1995 MHz: speeds: 2000 1800 1600 800 MHz pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0 ATI RS480 Host rev 0x01 ppb0 at pci0 dev 1 function 0 ATI RS480 PCIE rev 0x00 pci1 at ppb0 bus 1 vga1 at pci1 dev 5 function 0 ATI Radeon XPRESS 200M rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) ppb1 at pci0 dev 4 function 0 ATI RS480 PCIE rev 0x00 pci2 at ppb1 bus 16 ppb2 at pci0 dev 5 function 0 ATI RS480 PCIE rev 0x00 pci3 at ppb2 bus 32 ohci0 at pci0 dev 19 function 0 ATI IXP400 USB rev 0x00: apic 1 int 19 (irq 10), version 1.0, legacy support ohci1 at pci0 dev 19 function 1 ATI IXP400 USB rev 0x00: apic 1 int 19 (irq 10), version 1.0, legacy support ehci0 at pci0 dev 19 function 2 ATI IXP400 USB2 rev 0x00: apic 1 int 19 (irq 10) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 uhub0: ATI EHCI root hub, rev 2.00/1.00, addr 1 uhub0: 8 ports with 8 removable, self powered piixpm0 at pci0 dev 20 function 0 ATI IXP400 SMBus rev 0x11: SMI iic0 at piixpm0 admtemp0 at iic0 addr 0x4c: adm1032 pciide0 at pci0 dev 20 function 1 ATI IXP400 IDE rev 0x00: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility wd0 at pciide0 channel 0 drive 0: FUJITSU MHV2060AH wd0: 16-sector PIO, LBA, 57231MB, 117210240 sectors wd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: MATSHITA, UJ-840D, 1.02 SCSI0 5/cdrom removable cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 pcib0 at pci0 dev 20 function 3 ATI IXP400 ISA rev 0x00 ppb3 at pci0 dev 20 function 4 ATI IXP400 PCI rev 0x00 pci4 at ppb3 bus 2 bge0 at pci4 dev 1 function 0 Broadcom BCM5788 rev 0x03, BCM5705 A3 (0x3003): apic 1 int 23 (irq 10), address 00:0f:b0:f6:46:19 brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 2 Broadcom BCM4319 rev 0x02 at pci4 dev 2 function 0 not configured cbb0 at pci4 dev 4 function 0 TI PCI7XX1 CardBus rev 0x00: apic 1 int 20 (irq 11) TI PCI7XX1 FireWire rev 0x00 at pci4 dev 4 function 2 not configured TI PCI7XX1 Flash rev 0x00 at pci4 dev 4 function 3 not configured sdhc0 at pci4 dev 4 function 4 TI PCI7XX1 Secure Data rev 0x00: apic 1 int 21 (irq 9) sdmmc0 at sdhc0 sdmmc1 at sdhc0 sdmmc2 at sdhc0 cardslot0 at cbb0 slot 0 flags 0 cardbus0 at cardslot0: bus 3 device 0 cacheline 0x10, lattimer 0x20 pcmcia0 at cardslot0 auixp0 at pci0 dev 20 function 5 ATI IXP400 AC97 rev 0x02: apic 1 int 17 (irq 5) auixp0: soft resetting aclink ATI IXP400 Modem rev 0x02 at pci0 dev 20 function 6 not configured pchb1 at pci0 dev 24 function 0 AMD AMD64 HyperTransport rev 0x00 pchb2 at pci0 dev 24 function 1 AMD AMD64 Address Map rev 0x00 pchb3 at pci0 dev 24 function 2 AMD AMD64 DRAM Cfg rev 0x00 pchb4 at pci0 dev 24 function 3 AMD AMD64 Misc Cfg rev 0x00 usb1 at ohci0: USB revision 1.0 uhub1 at usb1
amd64 pcmcia/cardbus wackyness (was Re: pcmcia malo(4) can't load firmware)
I assume its related, but when I plug in a CF-PCMCIA adapter, it attaches as com(4). This is a known good card that attaches properly on macppc pcmcia. on amd64: com2 at pcmcia0 function 0: can't allocate i/o space ppc: wdc3 at pcmcia0 function 0 LEXAR ATA FLASH CARD, ATA FLASH, port 0x0/16 wd1 at wdc3 channel 0 drive 0: LEXAR ATA FLASH wd1: 1-sector PIO, LBA, 3915MB, 8018640 sectors wd1(wdc3:0:0): using BIOS timings On 2007 Jun 03 (Sun) at 08:32:31 -0700 (-0700), Peter Hessler wrote: :I have a pcmcia malo(4) card that I would like to use, and when I plug :it in it gives me malo0: timeout at boot firmware load!. The card is :a NetGear WG511 v2, and yes, I did pkg_add the firmware. dmesg with :acpi and MALO_DEBUG/CMALO_DEBUG defined below. : : : : :-- :On a paper submitted by a physicist colleague: : :This isn't right. This isn't even wrong. : -- Wolfgang Pauli : : :OpenBSD 4.1-current (ACPI) #3: Sat Jun 2 19:40:48 PDT 2007 :[EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/ACPI :real mem = 2012672000 (1919MB) :avail mem = 1931935744 (1842MB) :mainbus0 at root :bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xfc68f (23 entries) :bios0: Hewlett-Packard HP Compaq nx6125 (PZ895UA#ABA) :acpi0 at mainbus0: rev 0 :acpi0: tables DSDT FACP APIC MCFG SSDT :acpitimer0 at acpi0: 3579545 Hz, 32 bits :acpimadt0 at acpi0 addr 0xfec01000: PC-AT compat :cpu0 at mainbus0: apid 0 (boot processor) :cpu0: AMD Turion(tm) 64 Mobile ML-37 , 1995.33 MHz :cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW :cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB :64b/line 16-way L2 cache :cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully :associative :cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully :associative :cpu0: AMD erratum 89 present, BIOS upgrade may be required :cpu0: apic clock running at 199MHz :ioapic0 at mainbus0 apid 1 pa 0xfec0, version 21, 24 pins :ioapic0: misconfigured as apic 0, remapped to apid 1 :acpiprt0 at acpi0: bus 1 (C048) :acpiprt1 at acpi0: bus 2 (C0AB) :acpiprt2 at acpi0: bus 0 (C047) :acpiec0 at acpi0: C111 :acpicpu at acpi0 not configured :acpitz0 at acpi0, critical temperature: 94 degC :acpitz1 at acpi0, critical temperature: 100 degC :acpitz2 at acpi0, critical temperature: 100 degC :acpibat0 at acpi0: C179: not present :acpibat1 at acpi0: C178: not present :acpiac0 at acpi0: AC unit online :acpibtn0 at acpi0: C1F0 :acpibtn1 at acpi0: C1F1 :couldnt fetch acpicpu_softc :cpu0: PowerNow! K8 1995 MHz: speeds: 2000 1800 1600 800 MHz :pci0 at mainbus0 bus 0: configuration mode 1 :pchb0 at pci0 dev 0 function 0 ATI RS480 Host rev 0x01 :ppb0 at pci0 dev 1 function 0 ATI RS480 PCIE rev 0x00 :pci1 at ppb0 bus 1 :vga1 at pci1 dev 5 function 0 ATI Radeon XPRESS 200M rev 0x00 :wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) :wsdisplay0: screen 1-5 added (80x25, vt100 emulation) :ppb1 at pci0 dev 4 function 0 ATI RS480 PCIE rev 0x00 :pci2 at ppb1 bus 16 :ppb2 at pci0 dev 5 function 0 ATI RS480 PCIE rev 0x00 :pci3 at ppb2 bus 32 :ohci0 at pci0 dev 19 function 0 ATI IXP400 USB rev 0x00: apic 1 int :19 (irq 10), version 1.0, legacy support :ohci1 at pci0 dev 19 function 1 ATI IXP400 USB rev 0x00: apic 1 int :19 (irq 10), version 1.0, legacy support :ehci0 at pci0 dev 19 function 2 ATI IXP400 USB2 rev 0x00: apic 1 int :19 (irq 10) :usb0 at ehci0: USB revision 2.0 :uhub0 at usb0 :uhub0: ATI EHCI root hub, rev 2.00/1.00, addr 1 :uhub0: 8 ports with 8 removable, self powered :piixpm0 at pci0 dev 20 function 0 ATI IXP400 SMBus rev 0x11: SMI :iic0 at piixpm0 :admtemp0 at iic0 addr 0x4c: adm1032 :pciide0 at pci0 dev 20 function 1 ATI IXP400 IDE rev 0x00: DMA, :channel 0 configured to compatibility, channel 1 configured to :compatibility :wd0 at pciide0 channel 0 drive 0: FUJITSU MHV2060AH :wd0: 16-sector PIO, LBA, 57231MB, 117210240 sectors :wd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5 :atapiscsi0 at pciide0 channel 1 drive 0 :scsibus0 at atapiscsi0: 2 targets :cd0 at scsibus0 targ 0 lun 0: MATSHITA, UJ-840D, 1.02 SCSI0 5/cdrom :removable :cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 :pcib0 at pci0 dev 20 function 3 ATI IXP400 ISA rev 0x00 :ppb3 at pci0 dev 20 function 4 ATI IXP400 PCI rev 0x00 :pci4 at ppb3 bus 2 :bge0 at pci4 dev 1 function 0 Broadcom BCM5788 rev 0x03, BCM5705 A3 :(0x3003): apic 1 int 23 (irq 10), address 00:0f:b0:f6:46:19 :brgphy0 at bge0 phy 1: BCM5705 10/100/1000baseT PHY, rev. 2 :Broadcom BCM4319 rev 0x02 at pci4 dev 2 function 0 not configured :cbb0 at pci4 dev 4 function 0 TI PCI7XX1 CardBus rev 0x00: apic 1 int :20 (irq 11) :TI PCI7XX1 FireWire rev 0x00 at pci4 dev 4 function 2 not configured :TI PCI7XX1 Flash rev 0x00 at pci4 dev 4 function 3 not configured :sdhc0 at pci4 dev 4 function 4 TI PCI7XX1 Secure Data rev 0x00: apic :1 int 21 (irq 9) :sdmmc0 at sdhc0 :sdmmc1 at sdhc0 :sdmmc2 at
