hello @misc,
yesterday I've upgraded from 4.7-current to 4.8-current an openbsd box,
I sometime use for connecting via a smartphone through ppp but alas after
upgrading I'm not able to surf anymore. I've not had the time to browse the
changes so any hint in the meanwhile is really helpful
thanks
*** 4.7-current (sorry I have only these log)
tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1500
priority: 0
groups: tun egress
status: active
inet 217.203.153.223 --> 10.6.6.6 netmask 0xffffffff
Routing tables
Internet:
Destination Gateway Flags Refs Use Mtu Prio Iface
default 10.6.6.6 UGS 6 660 - 8 tun0
10.6.6.6 217.203.153.223 UH 1 0 1500 4 tun0
*** 4.8-current
default:
set log Phase Chat LCP IPCP CCP TUN Command
set device /dev/cuaU0
disable ipv6cp
disable vjcomp
disable deflate
disable chap
disable mppe
disable protocomp
enable lqr
accept lqr
isp:
set speed 460800
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 20 \"\" AT OK ATQ0 OK
AT+CGDCONT=1,\\\"IP\\\",\\\"APN\\\",\\\"\\\
",0,0 OK \\dATDT\\T TIMEOUT 40 CONNECT"
set phone "*99***1#"
set ifaddr 10.0.4.1/0 10.0.4.2/0 0.0.0.0 0.0.0.0
add default HISADDR
tun0: flags=9951<UP,POINTOPOINT,RUNNING,PROMISC,SIMPLEX,LINK0,MULTICAST> mtu
1500
lladdr fe:e1:ba:d1:aa:9c
priority: 0
groups: tun egress
status: active
inet 217.203.150.212 --> 10.6.6.6 netmask 0xffffffff
inet6 fe80::fce1:baff:fed1:aa9c%tun0 -> prefixlen 64 scopeid 0x6
Routing tables
Internet:
Destination Gateway Flags Refs Use Mtu Prio Iface
default 10.6.6.6 UGS 1 4 - 8 tun0
10.6.6.6 link#6 UHC 1 0 1500 4 tun0
10.6.6.6 link#6 UHLc 1 0 1500 4 tun0
OpenBSD 4.8-current (GENERIC.MP) #336: Fri Aug 20 22:52:42 MDT 2010
dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 1062797312 (1013MB)
avail mem = 1020678144 (973MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xdc010 (18 entries)
bios0: vendor Phoenix Technologies LTD version "R0034J4" date 02/26/2007
bios0: Sony Corporation VGN-C1S_H
acpi0 at bios0: rev 0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG APIC BOOT SSDT SSDT
acpi0: wakeup devices PWRB(S4) PXS1(S3) PXS2(S3) PXS3(S3) PXS4(S3) USB1(S3)
USB2(S3) USB3(S3) USB4(S3) USB7(S3) LANC(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz, 1662.80 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG
cpu0: 2MB 64b/line 8-way L2 cache
cpu0: apic clock running at 166MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz, 1662.50 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG
cpu1: 2MB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEGP)
acpiprt2 at acpi0: bus 2 (RP01)
acpiprt3 at acpi0: bus 4 (RP02)
acpiprt4 at acpi0: bus 6 (RP03)
acpiprt5 at acpi0: bus 8 (RP04)
acpiprt6 at acpi0: bus 10 (PCIB)
acpiec0 at acpi0
acpicpu0 at acpi0: C2, C1, PSS
acpicpu1 at acpi0: C2, C1, PSS
acpitz0 at acpi0: critical temperature 105 degC
acpitz1 at acpi0: critical temperature 105 degC
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 not present
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpidock0 at acpi0: DOCK not docked (0)
acpisony0 at acpi0: SNC_
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD01
acpivout1 at acpivideo0: DD02
acpivout2 at acpivideo0: DD03
cpu0: Enhanced SpeedStep 1662 MHz: speeds: 1667, 1333, 1000 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xb0000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16 (irq 7)
drm0 at inteldrm0
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: apic 1 int
22 (irq 4)
azalia0: codecs: Realtek ALC262, Conexant/0x2c06, using Realtek ALC262
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: apic 1 int 17
(irq 3)
pci1 at ppb0 bus 2
mskc0 at pci1 dev 0 function 0 "Marvell Yukon 88E8036" rev 0x13, Yukon-2 FE
rev. A1 (0x1): apic 1 int 16 (irq 7)
msk0 at mskc0 port A: address 00:13:a9:60:1b:eb
eephy0 at msk0 phy 0: 88E3082 10/100 PHY, rev. 3
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: apic 1 int 16
(irq 7)
pci2 at ppb1 bus 4
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: apic 1 int 18
(irq 11)
pci3 at ppb2 bus 6
wpi0 at pci3 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: apic 1 int
18 (irq 11), MoW2, address 00:18:de:ad:3e:96
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: apic 1 int 21
(irq 10)
pci4 at ppb3 bus 8
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1 int 23
(irq 5)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int 17
(irq 3)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1 int 18
(irq 11)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1 int 16
(irq 7)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1 int 23
(irq 5)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci5 at ppb4 bus 10
cbb0 at pci5 dev 3 function 0 "TI PCIXX12 CardBus" rev 0x00: apic 1 int 16 (irq
255), CardBus support disabled
"TI PCIXX12 FireWire" rev 0x00 at pci5 dev 3 function 1 not configured
"TI PCIXX12 Multimedia Card Reader" rev 0x00 at pci5 dev 3 function 2 not
configured
cardslot0 at cbb0 slot 0 flags 0
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0
configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <PIONEER, DVD-RW DVR-K16M, 1.10> ATAPI 5/cdrom
removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x02: DMA, channel
0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 1 int 19 (irq 10) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <HTS541010G9SA00>
wd0: 16-sector PIO, LBA48, 95396MB, 195371568 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 1 int 19
(irq 10)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM
spdmem1 at iic0 addr 0x52: 512MB DDR2 SDRAM non-parity PC2-4200CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 6 configuration 1 interface 0 "Sony UMH-U09" rev 2.00/4.52
addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <Sony, USB HS-CARD, 4.52> SCSI0 0/direct removable
sd0: drive offline
uhub0: port 1 reset failed
umass1 at uhub0 port 1 configuration 1 interface 0 "Nokia E52" rev 2.00/1.00
addr 3
umass1: using SCSI over Bulk-Only
scsibus2 at umass1: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <Nokia, S60, 1.0> SCSI0 0/direct removable
sd1: drive offline
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
sd1 detached
scsibus2 detached
umass1 detached
umodem0 at uhub0 port 1 configuration 1 interface 1 "Nokia E52" rev 2.00/1.00
addr 3
umodem0: data interface 2, has no CM over data, has break
umodem0: status change notification available
ucom0 at umodem0
--
see ya,
giovanni
