sensors process use 10% CPU time and high memory
Hi, I have 3 Tyan Trinity GC-SL boxes with OpenBSD 4.1. sensors kernel process use 10% of the CPU time and have RES high up to 74 MB. I did not have a sensorsd daemon runing. I do the same on my soekris, nothing like that. Any idea ? JG Pailloncy # top -uIS -s1 load averages: 1.18, 0.96, 0.75 09:34:33 70 processes: 5 running, 64 idle, 1 on processor CPU states: 3.2% user, 0.0% nice, 11.4% system, 0.0% interrupt, 85.4% idle Memory: Real: 75M/388M act/tot Free: 615M Swap: 0K/1028M used/tot renice PIDUID PRI NICE SIZE RES STATEWAIT TIMECPU COMMAND 5 01000K 40M sleeptimeou 57:32 9.03% sensors # sysctl hw.sensors hw.sensors.lm1.temp0=0.00 degC hw.sensors.lm1.temp1=-44.50 degC hw.sensors.lm1.temp2=-44.50 degC hw.sensors.lm1.fan0=3199 RPM hw.sensors.lm1.fan1=49 RPM hw.sensors.lm1.fan2=49 RPM hw.sensors.lm1.volt0=0.00 VDC (VCore) hw.sensors.lm1.volt1=0.00 VDC (VINR0) hw.sensors.lm1.volt2=0.00 VDC (+3.3V) hw.sensors.lm1.volt3=0.00 VDC (+5V) hw.sensors.lm1.volt4=0.00 VDC (+12V) hw.sensors.lm1.volt5=-14.91 VDC (-12V) hw.sensors.lm1.volt6=4.56 VDC (-5V) hw.sensors.lm1.volt7=0.00 VDC (5VSB) hw.sensors.lm1.volt8=0.00 VDC (VBAT) # dmesg OpenBSD 4.1 (GENERIC) #1435: Sat Mar 10 19:07:45 MST 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Pentium(R) 4 CPU 2.66GHz (GenuineIntel 686-class) 2.66 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR real mem = 1073246208 (1048092K) avail mem = 745324544 (727856K) using 4278 buffers containing 280363008 bytes (273792K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+ BIOS, date 11/09/04, BIOS32 rev. 0 @ 0xfdb80, SMBIOS rev. 2.3 @ 0xf0640 (50 entries) apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown apm0: flags 30102 dobusy 0 doidle 1 pcibios0 at bios0: rev 2.1 @ 0xf/0x1 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf4ee0/272 (15 entries) pcibios0: PCI Interrupt Router at 000:01:7 (ServerWorks CSB5 rev 0x00) pcibios0: PCI bus #0 is the last bus bios0: ROM list: 0xc/0x8000 0xc8000/0x2200 0xca800/0x1000 0xcb800/0x1800 acpi at mainbus0 not configured cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 ServerWorks GCNB-LE Host rev 0x32 pchb1 at pci0 dev 0 function 1 ServerWorks GCNB-LE Host rev 0x00 pci1 at pchb1 bus 1 ami0 at pci1 dev 3 function 0 Symbios Logic MegaRAID rev 0x01: irq 10 ami0: LSI 520, 64b/lhc, FW 1L37, BIOS vG119, 64MB RAM ami0: 1 channels, 0 FC loops, 1 logical drives scsibus0 at ami0: 40 targets sd0 at scsibus0 targ 0 lun 0: AMI, Host drive #00, SCSI2 0/direct fixed sd0: 70512MB, 70512 cyl, 64 head, 32 sec, 512 bytes/sec, 144408576 sec total scsibus1 at ami0: 16 targets vga1 at pci0 dev 7 function 0 ATI Rage XL rev 0x27 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) fxp0 at pci0 dev 8 function 0 Intel 8255x rev 0x10, i82551: irq 9, address 00:e0:81:29:42:76 inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4 piixpm0 at pci0 dev 15 function 0 ServerWorks CSB5 rev 0x93: polling iic0 at piixpm0 lm1 at iic0 addr 0x28: W83782D piixpm0: exec: op 1, addr 0x49, cmdlen 1, len 0, flags 0x08: timeout, status 0x9BUSY,BUSERR pciide0 at pci0 dev 15 function 1 ServerWorks CSB5 IDE rev 0x93: DMA atapiscsi0 at pciide0 channel 0 drive 0 scsibus2 at atapiscsi0: 2 targets cd0 at scsibus2 targ 0 lun 0: SAMSUNG, CD-ROM SH-152A, C504 SCSI0 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 ohci0 at pci0 dev 15 function 2 ServerWorks OSB4/CSB5 USB rev 0x05: irq 10, version 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered pchb2 at pci0 dev 15 function 3 ServerWorks CSB5 LPC rev 0x00 pchb3 at pci0 dev 16 function 0 ServerWorks CIOB-X2 PCIX rev 0x05 pchb4 at pci0 dev 16 function 2 ServerWorks CIOB-X2 PCIX rev 0x05 pci2 at pchb4 bus 2 em0 at pci2 dev 7 function 0 Intel PRO/1000MT (82545EM) rev 0x01: irq 5, address 00:e0:81:29:42:77 isa0 at mainbus0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom0: console pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask fd45 netmask ff65 ttymask ffe7 pctr: user-level cycle counter enabled dkcsum: sd0 matches BIOS drive 0x80 root on sd0a rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
Re: sensors process use 10% CPU time and high memory
* Jean-Girard Pailloncy wrote: Hi, I have 3 Tyan Trinity GC-SL boxes with OpenBSD 4.1. sensors kernel process use 10% of the CPU time and have RES high up to 74 MB. I did not have a sensorsd daemon runing. I do the same on my soekris, nothing like that. try to disable iic and ichicc in UKC (boot bsd -c). Any idea ? JG Pailloncy # top -uIS -s1 load averages: 1.18, 0.96, 0.75 09:34:33 70 processes: 5 running, 64 idle, 1 on processor CPU states: 3.2% user, 0.0% nice, 11.4% system, 0.0% interrupt, 85.4% idle Memory: Real: 75M/388M act/tot Free: 615M Swap: 0K/1028M used/tot renice PIDUID PRI NICE SIZE RES STATEWAIT TIMECPU COMMAND 5 01000K 40M sleeptimeou 57:32 9.03% sensors # sysctl hw.sensors hw.sensors.lm1.temp0=0.00 degC hw.sensors.lm1.temp1=-44.50 degC hw.sensors.lm1.temp2=-44.50 degC hw.sensors.lm1.fan0=3199 RPM hw.sensors.lm1.fan1=49 RPM hw.sensors.lm1.fan2=49 RPM hw.sensors.lm1.volt0=0.00 VDC (VCore) hw.sensors.lm1.volt1=0.00 VDC (VINR0) hw.sensors.lm1.volt2=0.00 VDC (+3.3V) hw.sensors.lm1.volt3=0.00 VDC (+5V) hw.sensors.lm1.volt4=0.00 VDC (+12V) hw.sensors.lm1.volt5=-14.91 VDC (-12V) hw.sensors.lm1.volt6=4.56 VDC (-5V) hw.sensors.lm1.volt7=0.00 VDC (5VSB) hw.sensors.lm1.volt8=0.00 VDC (VBAT) # dmesg OpenBSD 4.1 (GENERIC) #1435: Sat Mar 10 19:07:45 MST 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Pentium(R) 4 CPU 2.66GHz (GenuineIntel 686-class) 2.66 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR real mem = 1073246208 (1048092K) avail mem = 745324544 (727856K) using 4278 buffers containing 280363008 bytes (273792K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+ BIOS, date 11/09/04, BIOS32 rev. 0 @ 0xfdb80, SMBIOS rev. 2.3 @ 0xf0640 (50 entries) apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown apm0: flags 30102 dobusy 0 doidle 1 pcibios0 at bios0: rev 2.1 @ 0xf/0x1 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf4ee0/272 (15 entries) pcibios0: PCI Interrupt Router at 000:01:7 (ServerWorks CSB5 rev 0x00) pcibios0: PCI bus #0 is the last bus bios0: ROM list: 0xc/0x8000 0xc8000/0x2200 0xca800/0x1000 0xcb800/0x1800 acpi at mainbus0 not configured cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 ServerWorks GCNB-LE Host rev 0x32 pchb1 at pci0 dev 0 function 1 ServerWorks GCNB-LE Host rev 0x00 pci1 at pchb1 bus 1 ami0 at pci1 dev 3 function 0 Symbios Logic MegaRAID rev 0x01: irq 10 ami0: LSI 520, 64b/lhc, FW 1L37, BIOS vG119, 64MB RAM ami0: 1 channels, 0 FC loops, 1 logical drives scsibus0 at ami0: 40 targets sd0 at scsibus0 targ 0 lun 0: AMI, Host drive #00, SCSI2 0/direct fixed sd0: 70512MB, 70512 cyl, 64 head, 32 sec, 512 bytes/sec, 144408576 sec total scsibus1 at ami0: 16 targets vga1 at pci0 dev 7 function 0 ATI Rage XL rev 0x27 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) fxp0 at pci0 dev 8 function 0 Intel 8255x rev 0x10, i82551: irq 9, address 00:e0:81:29:42:76 inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4 piixpm0 at pci0 dev 15 function 0 ServerWorks CSB5 rev 0x93: polling iic0 at piixpm0 lm1 at iic0 addr 0x28: W83782D piixpm0: exec: op 1, addr 0x49, cmdlen 1, len 0, flags 0x08: timeout, status 0x9BUSY,BUSERR pciide0 at pci0 dev 15 function 1 ServerWorks CSB5 IDE rev 0x93: DMA atapiscsi0 at pciide0 channel 0 drive 0 scsibus2 at atapiscsi0: 2 targets cd0 at scsibus2 targ 0 lun 0: SAMSUNG, CD-ROM SH-152A, C504 SCSI0 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 ohci0 at pci0 dev 15 function 2 ServerWorks OSB4/CSB5 USB rev 0x05: irq 10, version 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered pchb2 at pci0 dev 15 function 3 ServerWorks CSB5 LPC rev 0x00 pchb3 at pci0 dev 16 function 0 ServerWorks CIOB-X2 PCIX rev 0x05 pchb4 at pci0 dev 16 function 2 ServerWorks CIOB-X2 PCIX rev 0x05 pci2 at pchb4 bus 2 em0 at pci2 dev 7 function 0 Intel PRO/1000MT (82545EM) rev 0x01: irq 5, address 00:e0:81:29:42:77 isa0 at mainbus0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom0: console pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec biomask fd45 netmask ff65
Re: sensors process use 10% CPU time and high memory
I have 3 Tyan Trinity GC-SL boxes with OpenBSD 4.1. sensors kernel process use 10% of the CPU time and have RES high up to 74 MB. I did not have a sensorsd daemon runing. I do the same on my soekris, nothing like that. try to disable iic and ichicc in UKC (boot bsd -c). Works. Thank you. JG
Re: sensors process use 10% CPU time and high memory
On 11/06/07, Marc Balmer [EMAIL PROTECTED] wrote: * Jean-Girard Pailloncy wrote: Hi, I have 3 Tyan Trinity GC-SL boxes with OpenBSD 4.1. sensors kernel process use 10% of the CPU time and have RES high up to 74 MB. I did not have a sensorsd daemon runing. I do the same on my soekris, nothing like that. try to disable iic and ichicc in UKC (boot bsd -c). Are drivers attached at i2c bus always that bad on CPU time? C. Any idea ? JG Pailloncy # top -uIS -s1 load averages: 1.18, 0.96, 0.75 09:34:33 70 processes: 5 running, 64 idle, 1 on processor CPU states: 3.2% user, 0.0% nice, 11.4% system, 0.0% interrupt, 85.4% idle Memory: Real: 75M/388M act/tot Free: 615M Swap: 0K/1028M used/tot renice PIDUID PRI NICE SIZE RES STATEWAIT TIMECPU COMMAND 5 01000K 40M sleeptimeou 57:32 9.03% sensors # sysctl hw.sensors hw.sensors.lm1.temp0=0.00 degC hw.sensors.lm1.temp1=-44.50 degC hw.sensors.lm1.temp2=-44.50 degC hw.sensors.lm1.fan0=3199 RPM hw.sensors.lm1.fan1=49 RPM hw.sensors.lm1.fan2=49 RPM hw.sensors.lm1.volt0=0.00 VDC (VCore) hw.sensors.lm1.volt1=0.00 VDC (VINR0) hw.sensors.lm1.volt2=0.00 VDC (+3.3V) hw.sensors.lm1.volt3=0.00 VDC (+5V) hw.sensors.lm1.volt4=0.00 VDC (+12V) hw.sensors.lm1.volt5=-14.91 VDC (-12V) hw.sensors.lm1.volt6=4.56 VDC (-5V) hw.sensors.lm1.volt7=0.00 VDC (5VSB) hw.sensors.lm1.volt8=0.00 VDC (VBAT) # dmesg OpenBSD 4.1 (GENERIC) #1435: Sat Mar 10 19:07:45 MST 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC cpu0: Intel(R) Pentium(R) 4 CPU 2.66GHz (GenuineIntel 686-class) 2.66 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR real mem = 1073246208 (1048092K) avail mem = 745324544 (727856K) using 4278 buffers containing 280363008 bytes (273792K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+ BIOS, date 11/09/04, BIOS32 rev. 0 @ 0xfdb80, SMBIOS rev. 2.3 @ 0xf0640 (50 entries) apm0 at bios0: Power Management spec V1.2 apm0: AC on, battery charge unknown apm0: flags 30102 dobusy 0 doidle 1 pcibios0 at bios0: rev 2.1 @ 0xf/0x1 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf4ee0/272 (15 entries) pcibios0: PCI Interrupt Router at 000:01:7 (ServerWorks CSB5 rev 0x00) pcibios0: PCI bus #0 is the last bus bios0: ROM list: 0xc/0x8000 0xc8000/0x2200 0xca800/0x1000 0xcb800/0x1800 acpi at mainbus0 not configured cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 ServerWorks GCNB-LE Host rev 0x32 pchb1 at pci0 dev 0 function 1 ServerWorks GCNB-LE Host rev 0x00 pci1 at pchb1 bus 1 ami0 at pci1 dev 3 function 0 Symbios Logic MegaRAID rev 0x01: irq 10 ami0: LSI 520, 64b/lhc, FW 1L37, BIOS vG119, 64MB RAM ami0: 1 channels, 0 FC loops, 1 logical drives scsibus0 at ami0: 40 targets sd0 at scsibus0 targ 0 lun 0: AMI, Host drive #00, SCSI2 0/direct fixed sd0: 70512MB, 70512 cyl, 64 head, 32 sec, 512 bytes/sec, 144408576 sec total scsibus1 at ami0: 16 targets vga1 at pci0 dev 7 function 0 ATI Rage XL rev 0x27 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) fxp0 at pci0 dev 8 function 0 Intel 8255x rev 0x10, i82551: irq 9, address 00:e0:81:29:42:76 inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4 piixpm0 at pci0 dev 15 function 0 ServerWorks CSB5 rev 0x93: polling iic0 at piixpm0 lm1 at iic0 addr 0x28: W83782D piixpm0: exec: op 1, addr 0x49, cmdlen 1, len 0, flags 0x08: timeout, status 0x9BUSY,BUSERR pciide0 at pci0 dev 15 function 1 ServerWorks CSB5 IDE rev 0x93: DMA atapiscsi0 at pciide0 channel 0 drive 0 scsibus2 at atapiscsi0: 2 targets cd0 at scsibus2 targ 0 lun 0: SAMSUNG, CD-ROM SH-152A, C504 SCSI0 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 ohci0 at pci0 dev 15 function 2 ServerWorks OSB4/CSB5 USB rev 0x05: irq 10, version 1.0, legacy support usb0 at ohci0: USB revision 1.0 uhub0 at usb0 uhub0: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1 uhub0: 4 ports with 4 removable, self powered pchb2 at pci0 dev 15 function 3 ServerWorks CSB5 LPC rev 0x00 pchb3 at pci0 dev 16 function 0 ServerWorks CIOB-X2 PCIX rev 0x05 pchb4 at pci0 dev 16 function 2 ServerWorks CIOB-X2 PCIX rev 0x05 pci2 at pchb4 bus 2 em0 at pci2 dev 7 function 0 Intel PRO/1000MT (82545EM) rev 0x01: irq 5, address 00:e0:81:29:42:77 isa0 at mainbus0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker spkr0 at pcppi0 lpt0 at isa0 port 0x378/4 irq 7 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pccom0: console pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
