Re: [mkgmap-dev] Routing problem on GPSMAP 276Cx
Thank you Ticker and Gerdfor some reason i've been to restrictive in my device using 'Avoidence Setup' Problem solvedMit freundlichem Gruß Manfred Haiduk Ursprüngliche Nachricht Von: Ticker Berkin Datum: 13.10.2020 10:42 (GMT+01:00) An: Development list for mkgmap Betreff: Re: [mkgmap-dev] Routing problem on GPSMAP 276Cx HiAlso:Routes through ferry terminals often involve service roads with a lowroad-class. Fastest time routing avoids using lower class roads in themiddle of a journey.Again, in a terminal there are often barriers and roads marked asaccess=customer or similar and these might set mkgmap:throughroute=no,again preventing routing.In complex terminals, there often isn't a clear route through onto theferry - I spent a while examining the terminals at both ends of a ferryand fixing various one-ways etc.Finally, after the doing the above, I still couldn't make thisparticular ferry work. Changing the ferry to a standard road didn't fixit. I could route from just outside one terminal to just outside theterminal at the other end, but not to points further along the road. Ithink there might be a problem with the internal routing structures(RouteCenter) where there is a single long distance as the onlyconnection within a RouteCenter and this is also the only connectionbetween the other RouteCenters at either end.TickerOn Tue, 2020-10-13 at 07:19 +, Gerd Petermann wrote:> Hi Manfred,> > did you make sure that the transport mode on your device is> configured to allow usage of ferries?> > Gerd> > > Von: mkgmap-dev im Auftrag> von Manfred Haiduk > Gesendet: Sonntag, 11. Oktober 2020 19:26> An: Development list for mkgmap> Betreff: [mkgmap-dev] Routing problem on GPSMAP 276Cx> > Hi all> > might be i stumbled again over a silly problem on my GPSMAP 276Cx.> Try> to route from my Hometown Hürtgenwald to Bad Honnef. The most obvious> way to do that is using the ferry Rolandseck <-> Bad Honnef.> MapSource> will use it but it seems, that the Garmin Device refuse to use any> ferry> routing, it chooses always a routing using bridges. Any idea, what> could> be wrong ?> > --> > Mit freundlichen Grüßen> > #> Manfred Haiduk,> Zum Fischbach 9,> 52393 Hürtgenwald> e-mail mhai...@t-online.de> #> > ___> mkgmap-dev mailing list> mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev> ___> mkgmap-dev mailing list> mkgmap-dev@lists.mkgmap.org.uk> http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev___mkgmap-dev mailing listmkgmap-...@lists.mkgmap.org.ukhttp://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Re: [mkgmap-dev] Routing problem on GPSMAP 276Cx
Disregard this e-mail, found out, what was going wrong ;-) Am 11.10.2020 um 19:26 schrieb Manfred Haiduk: Hi all might be i stumbled again over a silly problem on my GPSMAP 276Cx. Try to route from my Hometown Hürtgenwald to Bad Honnef. The most obvious way to do that is using the ferry Rolandseck <-> Bad Honnef. MapSource will use it but it seems, that the Garmin Device refuse to use any ferry routing, it chooses always a routing using bridges. Any idea, what could be wrong ? -- # Viele Grüße und 73 de Manfred Haiduk, DD8KQ e-mail mhai...@t-online.de dd...@gmx.de # ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Re: [mkgmap-dev] Routing problem on GPSMAP 276Cx
Hi Also: Routes through ferry terminals often involve service roads with a low road-class. Fastest time routing avoids using lower class roads in the middle of a journey. Again, in a terminal there are often barriers and roads marked as access=customer or similar and these might set mkgmap:throughroute=no, again preventing routing. In complex terminals, there often isn't a clear route through onto the ferry - I spent a while examining the terminals at both ends of a ferry and fixing various one-ways etc. Finally, after the doing the above, I still couldn't make this particular ferry work. Changing the ferry to a standard road didn't fix it. I could route from just outside one terminal to just outside the terminal at the other end, but not to points further along the road. I think there might be a problem with the internal routing structures (RouteCenter) where there is a single long distance as the only connection within a RouteCenter and this is also the only connection between the other RouteCenters at either end. Ticker On Tue, 2020-10-13 at 07:19 +, Gerd Petermann wrote: > Hi Manfred, > > did you make sure that the transport mode on your device is > configured to allow usage of ferries? > > Gerd > > > Von: mkgmap-dev im Auftrag > von Manfred Haiduk > Gesendet: Sonntag, 11. Oktober 2020 19:26 > An: Development list for mkgmap > Betreff: [mkgmap-dev] Routing problem on GPSMAP 276Cx > > Hi all > > might be i stumbled again over a silly problem on my GPSMAP 276Cx. > Try > to route from my Hometown Hürtgenwald to Bad Honnef. The most obvious > way to do that is using the ferry Rolandseck <-> Bad Honnef. > MapSource > will use it but it seems, that the Garmin Device refuse to use any > ferry > routing, it chooses always a routing using bridges. Any idea, what > could > be wrong ? > > -- > > Mit freundlichen Grüßen > > # > Manfred Haiduk, > Zum Fischbach 9, > 52393 Hürtgenwald > e-mail mhai...@t-online.de > # > > ___ > mkgmap-dev mailing list > mkgmap-dev@lists.mkgmap.org.uk > http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev > ___ > mkgmap-dev mailing list > mkgmap-dev@lists.mkgmap.org.uk > http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
Re: [mkgmap-dev] Routing problem on GPSMAP 276Cx
Hi Manfred, did you make sure that the transport mode on your device is configured to allow usage of ferries? Gerd Von: mkgmap-dev im Auftrag von Manfred Haiduk Gesendet: Sonntag, 11. Oktober 2020 19:26 An: Development list for mkgmap Betreff: [mkgmap-dev] Routing problem on GPSMAP 276Cx Hi all might be i stumbled again over a silly problem on my GPSMAP 276Cx. Try to route from my Hometown Hürtgenwald to Bad Honnef. The most obvious way to do that is using the ferry Rolandseck <-> Bad Honnef. MapSource will use it but it seems, that the Garmin Device refuse to use any ferry routing, it chooses always a routing using bridges. Any idea, what could be wrong ? -- Mit freundlichen Grüßen # Manfred Haiduk, Zum Fischbach 9, 52393 Hürtgenwald e-mail mhai...@t-online.de # ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev
[mkgmap-dev] Routing problem on GPSMAP 276Cx
Hi all might be i stumbled again over a silly problem on my GPSMAP 276Cx. Try to route from my Hometown Hürtgenwald to Bad Honnef. The most obvious way to do that is using the ferry Rolandseck <-> Bad Honnef. MapSource will use it but it seems, that the Garmin Device refuse to use any ferry routing, it chooses always a routing using bridges. Any idea, what could be wrong ? -- Mit freundlichen Grüßen # Manfred Haiduk, Zum Fischbach 9, 52393 Hürtgenwald e-mail mhai...@t-online.de # ___ mkgmap-dev mailing list mkgmap-dev@lists.mkgmap.org.uk http://www.mkgmap.org.uk/mailman/listinfo/mkgmap-dev