Re: VB.NET clients limited to 4 MEG?
The below error was thrown because when you use the .NET classes from CSD05, you must upgrade the Framework to 1.1 (the docs are wrong). Once we figured that out, it was determined that .NET straight out of CSD05 has (incorrectly) a 4 MEG limit on the Client channels. IBM sent me a fix, which I will test out as soon as my VB.NET software comes in. (The client I was helping gave up on CSD05 and .NET and went back to using the Support Pack, because CSD05 also introduces PCF errors when used out of .NET, which he needed). The MQChannelDefenition Class listed at the start of Chapter 4 is not available for use (it is private, an omission in the doc). -Original Message- From: Potkay, Peter M (PLC, IT) [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2003 1:07 PM To: [EMAIL PROTECTED] Subject: Re: VB.NET clients limited to 4 MEG? Since upgrading to CSD05, the application now just flat out does not work. The below error is thrown when attempting to connect to the QM: 'DefaultDomain': Loaded 'c:\windows\microsoft.net\framework\v1.0.3705\mscorlib.dll', No symbols loaded. 'mqtest': Loaded 'D:\Development\mqtest\mqtest\bin\mqtest.exe', Symbols loaded. 'mqtest.exe': Loaded 'c:\windows\assembly\gac\system\1.0.3300.0__b77a5c561934e089\system.dll', No symbols loaded. 'mqtest.exe': Loaded 'c:\windows\assembly\gac\microsoft.visualbasic\7.0.3300.0__b03f5f7f11d50a3a\ microsoft.visualbasic.dll', No symbols loaded. 'mqtest.exe': Loaded 'c:\windows\assembly\gac\amqmdnet\1.0.0.3__dd3cb1c9aae9ec97\amqmdnet.dll', No symbols loaded. An unhandled exception of type 'System.IO.FileNotFoundException' occurred in amqmdnet.dll Additional information: File or assembly name System.EnterpriseServices, or one of its dependencies, was not found. -Original Message- From: Potkay, Peter M (PLC, IT) [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2003 12:35 PM To: [EMAIL PROTECTED] Subject: Re: VB.NET clients limited to 4 MEG? I upgraded the developer to CSD05, but still no luck. I looked in the Java MQ manual and found a class called MQChannelDefinition. This class has a variable called maxMessageLength. maxMessageLength public int maxMessageLength The maximum length of message that can be sent to the queue manager. I assume this is a variable that can be set in Java. So, since the .NET classes are very similar to the Java classes, I looked in the .NET manual for it. The only mention of this class is on the first page of Chapter 4 of the .NET manual. It only says the class is available, but gives no mention of its supported variables. But the class is just not there when you try and access it in the code. I have opened up a ticket with IBM. -Original Message- From: Potkay, Peter M (PLC, IT) [mailto:[EMAIL PROTECTED] Sent: Wednesday, November 12, 2003 3:09 PM To: [EMAIL PROTECTED] Subject: VB.NET clients limited to 4 MEG? I have a client at 5.3 CSD04 with the .NET support pack (Next we week we will upgrade him to CSD05 and the supported classes). Anyway, it seems we can't get a message larger then 4 MEG thru. The QM, the SVRCONN channel and the queue are all at 104857600 for Max Message Length. It keeps throwing a 2010 Error (MQRC_DATA_LENGTH_ERROR). From the Error manual, this means: The DataLength parameter is not valid. Either the parameter pointer is not valid, or it points to read-only storage. (It is not always possible to detect parameter pointers that are not valid; if not detected, unpredictable results occur.) This reason can also be returned to an MQ client program on the MQGET, MQPUT, or MQPUT1 call, if the BufferLength parameter exceeds the maximum message size that was negotiated for the client channel. Corrective action: Correct the parameter. If the error occurs for a WebSphere MQ client program, also check that the maximum message size for the channel is big enough to accommodate the message being sent; if it is not big enough, increase the maximum message size for the channel. The app returns some info that shows the MaxMessageLength is 4194304. Since this info in the display is between the IPROCS count and the current depth, we assume it means the queue. So, I made the MAX on the queue 12345, and the SVRCONN channel 300. Now the app returns that the max is 12345. Next, I made the MAX on the queue 400, and the SVRCONN channel was left at 300. Now the app returns that the max is 300! Finally I made both the queue and the SVRCONN channel 500, and the app retuned the MAX as 4194304. MQSERVER variable is not set. The app is building the MQEnvironment class. Why the artificial limit at 4 MEG? Peter Potkay MQSeries Specialist The Hartford Financial Services [EMAIL PROTECTED] x77906 IBM MQSeries Certified This communication, including attachments, is for the exclusive use of addressee and may contain propr
Re: VB.NET clients limited to 4 MEG?
Since upgrading to CSD05, the application now just flat out does not work. The below error is thrown when attempting to connect to the QM: 'DefaultDomain': Loaded 'c:\windows\microsoft.net\framework\v1.0.3705\mscorlib.dll', No symbols loaded. 'mqtest': Loaded 'D:\Development\mqtest\mqtest\bin\mqtest.exe', Symbols loaded. 'mqtest.exe': Loaded 'c:\windows\assembly\gac\system\1.0.3300.0__b77a5c561934e089\system.dll', No symbols loaded. 'mqtest.exe': Loaded 'c:\windows\assembly\gac\microsoft.visualbasic\7.0.3300.0__b03f5f7f11d50a3a\ microsoft.visualbasic.dll', No symbols loaded. 'mqtest.exe': Loaded 'c:\windows\assembly\gac\amqmdnet\1.0.0.3__dd3cb1c9aae9ec97\amqmdnet.dll', No symbols loaded. An unhandled exception of type 'System.IO.FileNotFoundException' occurred in amqmdnet.dll Additional information: File or assembly name System.EnterpriseServices, or one of its dependencies, was not found. -Original Message- From: Potkay, Peter M (PLC, IT) [mailto:[EMAIL PROTECTED] Sent: Thursday, November 13, 2003 12:35 PM To: [EMAIL PROTECTED] Subject: Re: VB.NET clients limited to 4 MEG? I upgraded the developer to CSD05, but still no luck. I looked in the Java MQ manual and found a class called MQChannelDefinition. This class has a variable called maxMessageLength. maxMessageLength public int maxMessageLength The maximum length of message that can be sent to the queue manager. I assume this is a variable that can be set in Java. So, since the .NET classes are very similar to the Java classes, I looked in the .NET manual for it. The only mention of this class is on the first page of Chapter 4 of the .NET manual. It only says the class is available, but gives no mention of its supported variables. But the class is just not there when you try and access it in the code. I have opened up a ticket with IBM. -Original Message- From: Potkay, Peter M (PLC, IT) [mailto:[EMAIL PROTECTED] Sent: Wednesday, November 12, 2003 3:09 PM To: [EMAIL PROTECTED] Subject: VB.NET clients limited to 4 MEG? I have a client at 5.3 CSD04 with the .NET support pack (Next we week we will upgrade him to CSD05 and the supported classes). Anyway, it seems we can't get a message larger then 4 MEG thru. The QM, the SVRCONN channel and the queue are all at 104857600 for Max Message Length. It keeps throwing a 2010 Error (MQRC_DATA_LENGTH_ERROR). From the Error manual, this means: The DataLength parameter is not valid. Either the parameter pointer is not valid, or it points to read-only storage. (It is not always possible to detect parameter pointers that are not valid; if not detected, unpredictable results occur.) This reason can also be returned to an MQ client program on the MQGET, MQPUT, or MQPUT1 call, if the BufferLength parameter exceeds the maximum message size that was negotiated for the client channel. Corrective action: Correct the parameter. If the error occurs for a WebSphere MQ client program, also check that the maximum message size for the channel is big enough to accommodate the message being sent; if it is not big enough, increase the maximum message size for the channel. The app returns some info that shows the MaxMessageLength is 4194304. Since this info in the display is between the IPROCS count and the current depth, we assume it means the queue. So, I made the MAX on the queue 12345, and the SVRCONN channel 300. Now the app returns that the max is 12345. Next, I made the MAX on the queue 400, and the SVRCONN channel was left at 300. Now the app returns that the max is 300! Finally I made both the queue and the SVRCONN channel 500, and the app retuned the MAX as 4194304. MQSERVER variable is not set. The app is building the MQEnvironment class. Why the artificial limit at 4 MEG? Peter Potkay MQSeries Specialist The Hartford Financial Services [EMAIL PROTECTED] x77906 IBM MQSeries Certified This communication, including attachments, is for the exclusive use of addressee and may contain proprietary, confidential or privileged information. If you are not the intended recipient, any use, copying, disclosure, dissemination or distribution is strictly prohibited. If you are not the intended recipient, please notify the sender immediately by return email and delete this communication and destroy all copies. Instructions for managing your mailing list subscription are provided in the Listserv General Users Guide available at http://www.lsoft.com Archive: http://vm.akh-wien.ac.at/MQSeries.archive Instructions for managing your mailing list subscription are provided in the Listserv General Users Guide available at http://www.lsoft.com Archive: http://vm.akh-wien.ac.at/MQSeries.archive Instructions for managing your mailing list subscription are provided in the Listserv General Users Guide available at http://www.lsoft.com Archive: http://vm.akh-wien.ac.at/MQSeries.archive
Re: VB.NET clients limited to 4 MEG?
I upgraded the developer to CSD05, but still no luck. I looked in the Java MQ manual and found a class called MQChannelDefinition. This class has a variable called maxMessageLength. maxMessageLength public int maxMessageLength The maximum length of message that can be sent to the queue manager. I assume this is a variable that can be set in Java. So, since the .NET classes are very similar to the Java classes, I looked in the .NET manual for it. The only mention of this class is on the first page of Chapter 4 of the .NET manual. It only says the class is available, but gives no mention of its supported variables. But the class is just not there when you try and access it in the code. I have opened up a ticket with IBM. -Original Message- From: Potkay, Peter M (PLC, IT) [mailto:[EMAIL PROTECTED] Sent: Wednesday, November 12, 2003 3:09 PM To: [EMAIL PROTECTED] Subject: VB.NET clients limited to 4 MEG? I have a client at 5.3 CSD04 with the .NET support pack (Next we week we will upgrade him to CSD05 and the supported classes). Anyway, it seems we can't get a message larger then 4 MEG thru. The QM, the SVRCONN channel and the queue are all at 104857600 for Max Message Length. It keeps throwing a 2010 Error (MQRC_DATA_LENGTH_ERROR). From the Error manual, this means: The DataLength parameter is not valid. Either the parameter pointer is not valid, or it points to read-only storage. (It is not always possible to detect parameter pointers that are not valid; if not detected, unpredictable results occur.) This reason can also be returned to an MQ client program on the MQGET, MQPUT, or MQPUT1 call, if the BufferLength parameter exceeds the maximum message size that was negotiated for the client channel. Corrective action: Correct the parameter. If the error occurs for a WebSphere MQ client program, also check that the maximum message size for the channel is big enough to accommodate the message being sent; if it is not big enough, increase the maximum message size for the channel. The app returns some info that shows the MaxMessageLength is 4194304. Since this info in the display is between the IPROCS count and the current depth, we assume it means the queue. So, I made the MAX on the queue 12345, and the SVRCONN channel 300. Now the app returns that the max is 12345. Next, I made the MAX on the queue 400, and the SVRCONN channel was left at 300. Now the app returns that the max is 300! Finally I made both the queue and the SVRCONN channel 500, and the app retuned the MAX as 4194304. MQSERVER variable is not set. The app is building the MQEnvironment class. Why the artificial limit at 4 MEG? Peter Potkay MQSeries Specialist The Hartford Financial Services [EMAIL PROTECTED] x77906 IBM MQSeries Certified This communication, including attachments, is for the exclusive use of addressee and may contain proprietary, confidential or privileged information. If you are not the intended recipient, any use, copying, disclosure, dissemination or distribution is strictly prohibited. If you are not the intended recipient, please notify the sender immediately by return email and delete this communication and destroy all copies. Instructions for managing your mailing list subscription are provided in the Listserv General Users Guide available at http://www.lsoft.com Archive: http://vm.akh-wien.ac.at/MQSeries.archive Instructions for managing your mailing list subscription are provided in the Listserv General Users Guide available at http://www.lsoft.com Archive: http://vm.akh-wien.ac.at/MQSeries.archive
VB.NET clients limited to 4 MEG?
I have a client at 5.3 CSD04 with the .NET support pack (Next we week we will upgrade him to CSD05 and the supported classes). Anyway, it seems we can't get a message larger then 4 MEG thru. The QM, the SVRCONN channel and the queue are all at 104857600 for Max Message Length. It keeps throwing a 2010 Error (MQRC_DATA_LENGTH_ERROR). From the Error manual, this means: The DataLength parameter is not valid. Either the parameter pointer is not valid, or it points to read-only storage. (It is not always possible to detect parameter pointers that are not valid; if not detected, unpredictable results occur.) This reason can also be returned to an MQ client program on the MQGET, MQPUT, or MQPUT1 call, if the BufferLength parameter exceeds the maximum message size that was negotiated for the client channel. Corrective action: Correct the parameter. If the error occurs for a WebSphere MQ client program, also check that the maximum message size for the channel is big enough to accommodate the message being sent; if it is not big enough, increase the maximum message size for the channel. The app returns some info that shows the MaxMessageLength is 4194304. Since this info in the display is between the IPROCS count and the current depth, we assume it means the queue. So, I made the MAX on the queue 12345, and the SVRCONN channel 300. Now the app returns that the max is 12345. Next, I made the MAX on the queue 400, and the SVRCONN channel was left at 300. Now the app returns that the max is 300! Finally I made both the queue and the SVRCONN channel 500, and the app retuned the MAX as 4194304. MQSERVER variable is not set. The app is building the MQEnvironment class. Why the artificial limit at 4 MEG? Peter Potkay MQSeries Specialist The Hartford Financial Services [EMAIL PROTECTED] x77906 IBM MQSeries Certified This communication, including attachments, is for the exclusive use of addressee and may contain proprietary, confidential or privileged information. If you are not the intended recipient, any use, copying, disclosure, dissemination or distribution is strictly prohibited. If you are not the intended recipient, please notify the sender immediately by return email and delete this communication and destroy all copies. Instructions for managing your mailing list subscription are provided in the Listserv General Users Guide available at http://www.lsoft.com Archive: http://vm.akh-wien.ac.at/MQSeries.archive