Re: Workflow DB2 deadlock - sp#5 solved the problem, many thanks!
Title: RE: Workflow DB2 deadlock - sp#5 solved the problem, many thanks! Many thanks Brian for the important info. I upgraded to sp#5, now the annoying msg dissappeared. best regards, Ben -Original Message- From: Brian S. Crabtree [mailto:[EMAIL PROTECTED]] Sent: Friday, September 20, 2002 12:01 PM To: [EMAIL PROTECTED] Subject: Re: Workflow DB2 deadlock Workflow DB2 deadlockBenjamin This is a persistent problem in workflow see http://www.mqseries.net/phpBB/viewtopic.php?t=4558&highlight=deadlock and Newsgroups: ibm.software.websphere.mqworkflow It was supposed to be fixed in V3.3.0 SP#4 you could try moving to V3.3.2 You will probably have to contact IBM for your particular problem From IBM <<<<<<<<< If you see deadlocks after the installation of the newest SP and you are running DB2, then it would help to see the competing accesses of DB2. You can set up a monitor to get that information. In order to do that you have to create an event monitor by using the following DB2 command: CREATE EVENT MONITOR deadlck FOR DEADLOCKS WRITE TO FILE Then you can enable the monitor with the following DB2 command: SET EVENT MONITOR deadlck STATE 1 To switch it off: SET EVENT MONITOR deadlck STATE 0 <<<<<<<<< - Original Message - From: Benjamin Zhou To: [EMAIL PROTECTED] Sent: Friday, September 20, 2002 11:04 AM Subject: Workflow DB2 deadlock We're experiencing constant deadlock on our workflow run-time database . we use DB2. the message didn't indicate any specific action to correct it. the event log is full of such msg now - on NT, workflow 3.3.0 SP#4. Can any DB2 expert out there give me a hint what to look at? thanks for any help. Benjamin F. Zhou System Integrator IMS Group, PFS. (609) 514-7169 Instructions for managing your mailing list subscription are provided in the Listserv General Users Guide available at http://www.lsoft.com Archive: http://vm.akh-wien.ac.at/MQSeries.archive
Re: Workflow DB2 deadlock
Workflow DB2 deadlockBenjamin This is a persistent problem in workflow see http://www.mqseries.net/phpBB/viewtopic.php?t=4558&highlight=deadlock and Newsgroups: ibm.software.websphere.mqworkflow It was supposed to be fixed in V3.3.0 SP#4 you could try moving to V3.3.2 You will probably have to contact IBM for your particular problem >From IBM <<<<<<<<< If you see deadlocks after the installation of the newest SP and you are running DB2, then it would help to see the competing accesses of DB2. You can set up a monitor to get that information. In order to do that you have to create an event monitor by using the following DB2 command: CREATE EVENT MONITOR deadlck FOR DEADLOCKS WRITE TO FILE Then you can enable the monitor with the following DB2 command: SET EVENT MONITOR deadlck STATE 1 To switch it off: SET EVENT MONITOR deadlck STATE 0 <<<<<<<<< - Original Message - From: Benjamin Zhou To: [EMAIL PROTECTED] Sent: Friday, September 20, 2002 11:04 AM Subject: Workflow DB2 deadlock We're experiencing constant deadlock on our workflow run-time database . we use DB2. the message didn't indicate any specific action to correct it. the event log is full of such msg now - on NT, workflow 3.3.0 SP#4. Can any DB2 expert out there give me a hint what to look at? thanks for any help. Benjamin F. Zhou System Integrator IMS Group, PFS. (609) 514-7169 Instructions for managing your mailing list subscription are provided in the Listserv General Users Guide available at http://www.lsoft.com Archive: http://vm.akh-wien.ac.at/MQSeries.archive
Re: Workflow DB2 deadlock
Title: Workflow DB2 deadlock Our company certified Workflow for corporate use. We encountered numerous deadlocks. I don't have the details, but I know we worked with IBM intensively to fix the problem. My advice would be to open a ticket with IBM. They SHOULD have the answer by now! Valerie A. Howells SBC/Ameritech Middleware MQ Team Hoffman Estates, IL IBM Certified MQ Series Specialist email: [EMAIL PROTECTED] -Original Message-From: Benjamin Zhou [mailto:[EMAIL PROTECTED]]Sent: Friday, September 20, 2002 10:05 AMTo: [EMAIL PROTECTED]Subject: Workflow DB2 deadlock We're experiencing constant deadlock on our workflow run-time database . we use DB2. the message didn't indicate any specific action to correct it. the event log is full of such msg now - on NT, workflow 3.3.0 SP#4. Can any DB2 expert out there give me a hint what to look at? thanks for any help. Benjamin F. Zhou System Integrator IMS Group, PFS. (609) 514-7169
Workflow DB2 deadlock
Title: Workflow DB2 deadlock We're experiencing constant deadlock on our workflow run-time database . we use DB2. the message didn't indicate any specific action to correct it. the event log is full of such msg now - on NT, workflow 3.3.0 SP#4. Can any DB2 expert out there give me a hint what to look at? thanks for any help. Benjamin F. Zhou System Integrator IMS Group, PFS. (609) 514-7169
