Re: [mythtv-users] Help, PVR-350 TV Out doesn't work
And here's the output of /sbin/lspci -v if it can help at all. 00:09.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01) Subsystem: Hauppauge computer works Inc. WinTV PVR-350 Flags: bus master, medium devsel, latency 64, IRQ 11 Memory at d800 (32-bit, prefetchable) [size=64M] Capabilities: [44] Power Management version 2 --- Gera Makarov [EMAIL PROTECTED] wrote: At this stage I've only been trying to output live tv from 350 but the intention was to run X through it. I did enable 350 hardware decoding in mythfrontend but it didn't do anything. I was able to get sound trhough 350 from the following test: # /usr/bin/ivtvfbctl /dev/fb0 -noglobalalpha -localalpha # dd if=/dev/video0 of=/dev/video16 bs=64k but there were diagonal lines that didn't let see the picture. I can't even get sound now (can't remember what I did to change it). Here's my modprobe.conf alias eth0 8139too alias snd-card-0 snd-via82xx options snd-card-0 index=0 options snd-via82xx index=0 remove snd-via82xx { /usr/sbin/alsactl store 0 /dev/null 21 || : ; }; /sbin/modprobe -r --ignore-remove snd-via82xx alias usb-controller uhci-hcd alias char-major-81 videodev alias char-major-81-0 ivtv alias tveeprom tveeprom-ivtv install ivtv /sbin/modprobe --ignore-install ivtv; /sbin/modprobe ivtv-fb Output from messages Aug 21 21:37:47 pvr kernel: ivtv: START INIT IVTV Aug 21 21:37:47 pvr kernel: ivtv: version 0.2.0 (rc3j) loading Aug 21 21:37:47 pvr kernel: ivtv: Linux version: 2.6.12-1.1398_FC4 686 REGPARM 4KSTACKS gcc-4.0 Aug 21 21:37:47 pvr kernel: ivtv: In case of problems please include the debug info Aug 21 21:37:47 pvr kernel: ivtv: between the START INIT IVTV and END INIT IVTV lines when Aug 21 21:37:47 pvr kernel: ivtv: mailing the ivtv-devel mailinglist. Aug 21 21:37:47 pvr kernel: ivtv: Autodetected WinTV PVR 350 card Aug 21 21:37:47 pvr kernel: ivtv: Found an iTVC15 based chip Aug 21 21:37:47 pvr kernel: ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 Aug 21 21:37:47 pvr kernel: PCI: setting IRQ 11 as level-triggered Aug 21 21:37:47 pvr kernel: ACPI: PCI Interrupt :00:09.0[A] - Link [LNKA] - GSI 11 (level, low) - IRQ 11 Aug 21 21:37:47 pvr kernel: ivtv: VIA PCI device: 0x3099 vendor: 0x1106 Aug 21 21:37:47 pvr kernel: tveeprom: Hauppauge: model = 48134, rev = I121, serial# = 6154918 Aug 21 21:37:47 pvr kernel: tveeprom: tuner = Philips FM1216 (idx = 21, type = 5) Aug 21 21:37:47 pvr kernel: tveeprom: tuner fmt = PAL(B/G) (eeprom = 0x04, v4l2 = 0x0007) Aug 21 21:37:47 pvr kernel: tveeprom: audio_processor = CS5331 (type = 9) Aug 21 21:37:47 pvr kernel: ivtv: i2c attach [client=tveeprom,ok] Aug 21 21:37:47 pvr kernel: ivtv: Tuner Type 5, Tuner formats 0x0007, Radio: yes, Model 0x00a51491, Revision 0x0001 Aug 21 21:37:47 pvr kernel: ivtv: PAL tuner detected Aug 21 21:37:47 pvr kernel: ivtv: Radio detected Aug 21 21:37:47 pvr kernel: ivtv: i2c attach [client=(tuner unset),ok] Aug 21 21:37:47 pvr kernel: tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0) Aug 21 21:37:47 pvr kernel: saa7115: starting probe for adapter SMBus Via Pro adapter at 0400 (0x0) Aug 21 21:37:48 pvr kernel: saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) Aug 21 21:37:48 pvr kernel: saa7115: detecting saa7115 client on address 0x42 Aug 21 21:37:48 pvr kernel: saa7115: writing init values Aug 21 21:37:48 pvr kernel: ivtv: i2c attach [client=saa7115,ok] Aug 21 21:37:48 pvr kernel: saa7115: status: (1E) 0x00, (1F) 0xc0 Aug 21 21:37:48 pvr kernel: saa7127: Ignoring new-style parameters in presence of obsolete ones Aug 21 21:37:48 pvr kernel: saa7127: video encoder driver version V 0.3 loaded Aug 21 21:37:48 pvr kernel: saa7127: detecting saa7127 client on address 0x88 Aug 21 21:37:48 pvr kernel: saa7127: Selecting NTSC video Standard Aug 21 21:37:48 pvr kernel: saa7127: Selecting S-Video+Composite Aug 21 21:37:48 pvr kernel: saa7127: Turn WSS off Aug 21 21:37:48 pvr kernel: saa7127: Widescreen Mode 4:3 Full Format Aug 21 21:37:48 pvr kernel: saa7127: Selecting Normal Encoder Input Aug 21 21:37:48 pvr kernel: saa7127: Enable Video Output Aug 21 21:37:48 pvr kernel: ivtv: i2c attach [client=saa7127,ok] Aug 21 21:37:48 pvr kernel: msp34xx: init: chip=MSP3418W-A2 +nicam +simple +simpler +radio mode=simpler Aug 21 21:37:48 pvr kernel: ivtv: i2c attach [client=MSP3418W-A2,ok] Aug 21 21:37:48 pvr kernel: msp34xxg: daemon started Aug 21 21:37:49 pvr kernel: ivtv: Encoder revision: 0x02040024 Aug 21 21:37:49 pvr kernel: ivtv: Encoder Firmware may be buggy, use version 0x02040011 Aug 21 21:37:49 pvr kernel: ivtv: Decoder revision: 0x02020023 Aug 21 21:37:49 pvr kernel: ivtv: Configuring WinTV PVR 350 card with 9 streams Aug 21 21:37:49 pvr kernel: ivtv: Create DMA stream 0 using 256 16384 byte buffers 4194304 kbytes
Re: [mythtv-users] Help, PVR-350 TV Out doesn't work
How do I install the right version of the firmware? I've checked the permissions all looks ok. Thanks. --- Nick [EMAIL PROTECTED] wrote: On 8/22/05, Gera Makarov [EMAIL PROTECTED] wrote: And here's the output of /sbin/lspci -v if it can help at all. 00:09.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01) Subsystem: Hauppauge computer works Inc. WinTV PVR-350 Flags: bus master, medium devsel, latency 64, IRQ 11 Memory at d800 (32-bit, prefetchable) [size=64M] Capabilities: [44] Power Management version 2 I would also check the mythfrontend logfile to see if there is any extra info listed there. Check the permissions of the ivtv created devices /dev/videoxx to make sure the mythfrontend user can access them (might need to modify the udev rules to do this on FC4. One of your firmwares for the 350 is buggy, you might consider updating it to a new one (check the ivtv messages log for the error). Nick ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users Start your day with Yahoo! - make it your home page http://www.yahoo.com/r/hs ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] Help, PVR-350 TV Out doesn't work
I've found an article about this firmware message which says it's nothing to warry about http://svn.wilsonet.com/projects/mythtvology/ticket/20 So I guess that's not that. Will keep looking. --- Gera Makarov [EMAIL PROTECTED] wrote: How do I install the right version of the firmware? I've checked the permissions all looks ok. Thanks. --- Nick [EMAIL PROTECTED] wrote: On 8/22/05, Gera Makarov [EMAIL PROTECTED] wrote: And here's the output of /sbin/lspci -v if it can help at all. 00:09.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01) Subsystem: Hauppauge computer works Inc. WinTV PVR-350 Flags: bus master, medium devsel, latency 64, IRQ 11 Memory at d800 (32-bit, prefetchable) [size=64M] Capabilities: [44] Power Management version 2 I would also check the mythfrontend logfile to see if there is any extra info listed there. Check the permissions of the ivtv created devices /dev/videoxx to make sure the mythfrontend user can access them (might need to modify the udev rules to do this on FC4. One of your firmwares for the 350 is buggy, you might consider updating it to a new one (check the ivtv messages log for the error). Nick ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users Start your day with Yahoo! - make it your home page http://www.yahoo.com/r/hs ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users Start your day with Yahoo! - make it your home page http://www.yahoo.com/r/hs ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] tv_grab_au is not working
Thank you, it works now. --- Joshua King [EMAIL PROTECTED] wrote: Hi On 21/8/05 9:48 AM, Gera Makarov [EMAIL PROTECTED] wrote: Hi there, When updating tv guide I'm getting the following message for every channel: ERROR: can't find DataSet for SBS - 2005-08-25 I can tell from that message that you're using the d1.com.au grabber. This error is normal for that grabber, they don't always have a full seven days of data for all of the channels. When I used this grabber, most of the time you can ignore the message and wait for it to run the next day and get the data then. Is there a fix for this or maybe another grabber for Australia? No fix, but yes there are plenty of other grabbers. The group's favourite is the NineMSN grabbers which you can get from the mailing list archives or get Michael Smith's version. http://www.immir.com/tv_grab_au Joshua King Send instant messages to your online friends http://au.messenger.yahoo.com ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users __ Do you Yahoo!? Read only the mail you want - Yahoo! Mail SpamGuard. http://promotions.yahoo.com/new_mail ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
[mythtv-users] Help, PVR-350 TV Out doesn't work
Did anyone have problems with tv-out on 350? I got mythtv working, can watch live tv on my computer (although the pq is not that great) but when trying to output pvr350 to tv it's not working. I'm running FC4 with all the latest updates. I followed the instructions (for FC3) on http://wilsonet.com/mythtv/fcmyth.php?SIDexpandables=closedivtv=openpvr350out=open#capture Please help. Thanks in advance. __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] Help, PVR-350 TV Out doesn't work
v4l2 device, streamtype 3 minor 24 Aug 21 21:37:49 pvr kernel: ivtv: Create stream 4 Aug 21 21:37:49 pvr kernel: ivtv: Registered v4l2 device, streamtype 4 minor 64 Aug 21 21:37:49 pvr kernel: ivtv: Create DMA stream 5 using 16 65536 byte buffers 1048576 kbytes total Aug 21 21:37:49 pvr kernel: ivtv: Registered v4l2 device, streamtype 5 minor 16 Aug 21 21:37:49 pvr kernel: ivtv: Create stream 6 using 1024 2048 byte buffers 262144 kbytes total Aug 21 21:37:49 pvr kernel: ivtv: Registered v4l2 device, streamtype 6 minor 228 Aug 21 21:37:49 pvr kernel: ivtv: Create stream 7 Aug 21 21:37:49 pvr kernel: ivtv: Registered v4l2 device, streamtype 7 minor 232 Aug 21 21:37:49 pvr kernel: ivtv: Create DMA stream 8 Aug 21 21:37:49 pvr kernel: ivtv: Registered v4l2 device, streamtype 8 minor 48 Aug 21 21:37:49 pvr kernel: ivtv: Setting Tuner 5 Aug 21 21:37:49 pvr kernel: tuner 1-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) Aug 21 21:37:49 pvr kernel: saa7115: decoder set input (4) Aug 21 21:37:49 pvr kernel: saa7115: now setting Composite input Aug 21 21:37:49 pvr kernel: ivtv: Setting audio matrix to input 3, output 1 Aug 21 21:37:49 pvr kernel: ivtv: Switching standard to PAL. Aug 21 21:37:49 pvr kernel: saa7115: decoder set norm PAL Aug 21 21:37:49 pvr kernel: saa7115: set audio: 0x01 Aug 21 21:37:49 pvr kernel: saa7127: Setting Encoder Video Standard Aug 21 21:37:49 pvr kernel: saa7127: Set PAL Video Mode Aug 21 21:37:49 pvr kernel: saa7127: Selecting PAL video Standard Aug 21 21:37:49 pvr kernel: ivtv: Initialized WinTV PVR 350, card #0 Aug 21 21:37:49 pvr kernel: ivtv: END INIT IVTV And there's my xorg file (I haven't modified it yet) # XFree86 4 configuration created by pyxf86config Section ServerLayout Identifier Default Layout Screen 0 Screen0 0 0 InputDeviceMouse0 CorePointer InputDeviceKeyboard0 CoreKeyboard EndSection Section Files # RgbPath is the location of the RGB database. Note, this is the name of the # file minus the extension (like .txt or .db). There is normally # no need to change the default. # Multiple FontPath entries are allowed (they are concatenated together) # By default, Red Hat 6.0 and later now use a font server independent of # the X server to render fonts. RgbPath /usr/X11R6/lib/X11/rgb FontPath unix/:7100 EndSection Section Module Load dbe Load extmod Load fbdevhw Load glx Load record Load freetype Load type1 Load dri EndSection Section InputDevice # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Option Xleds 1 2 3 # To disable the XKEYBOARD extension, uncomment XkbDisable. # Option XkbDisable # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # Option XkbModel pc102 # If you have a US Microsoft Natural keyboard, you can use: # Option XkbModel microsoft # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # Option XkbLayout de # or: # Option XkbLayout de # Option XkbVariantnodeadkeys # # If you'd like to switch the positions of your capslock and # control keys, use: # Option XkbOptionsctrl:swapcaps # Or if you just want both to be control, use: # Option XkbOptionsctrl:nocaps # Identifier Keyboard0 Driver kbd Option XkbModel pc105 Option XkbLayout us EndSection Section InputDevice Identifier Mouse0 Driver mouse Option Protocol IMPS/2 Option Device /dev/input/mice Option ZAxisMapping 4 5 Option Emulate3Buttons yes EndSection Section Monitor Identifier Monitor0 VendorName Monitor Vendor ModelNameCPD-G420 DisplaySize 360270 HorizSync30.0 - 110.0 VertRefresh 48.0 - 170.0 Option dpms EndSection Section Device Identifier Videocard0 Driver nv VendorName Videocard vendor BoardName NVIDIA GeForce 2 GTS (generic) EndSection Section Screen Identifier Screen0 Device Videocard0 MonitorMonitor0 DefaultDepth 24 SubSection Display Viewport 0 0 Depth 16 Modes800x600 640x480 EndSubSection SubSection Display Viewport 0 0 Depth 24 Modes1024x768 800x600 640x480 EndSubSection EndSection Section DRI Group0 Mode 0666 EndSection Thank you. --- Nick [EMAIL PROTECTED] wrote: On 8/21/05, Gera Makarov [EMAIL PROTECTED
[mythtv-users] tv_grab_au is not working
Hi there, When updating tv guide I'm getting the following message for every channel: ERROR: can't find DataSet for SBS - 2005-08-25 Is there a fix for this or maybe another grabber for Australia? Thanks. __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users