[mythtv-users] Unsupported LG tuner?
Good day all - New to the list, etc, etc. I am attempting to get my Hauppauge TV (model 44801, see dmesg info) card up and running with mythtv, but have had little to no success. I cannot seem to find a tuner in CARDLIST.tuner that fits the LG TPI8NSR11F tuner chip on my card. I have googled the tuner and have found that it is indeed listed in the tveeprom module sourcecode, but I am not quite sure how to activate it. I have tried tuners (from CARDLIST.tuner) 2, 27, 37, and 39 with little to no success. At best, I can only lock onto one channel (which is half scrambled anyway). Below is the information from dmesg when I run "modprobe bttv card=10". My kernel is 2.6.12-gentoo-r9. TIA for the help. bttv: driver version 0.9.15 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI Interrupt :01:07.0[A] -> Link [LNK4] -> GSI 5 (level, low) -> IRQ 5 bttv0: Bt878 (rev 17) at :01:07.0, irq: 5, latency: 32, mmio: 0xdc00 bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb bttv0: using: Hauppauge (bt878) [card=10,insmod option] bttv0: gpio: en=, out= in=00db [init] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] tuner 0-0061: chip found @ 0xc2 (bt878 #0 [sw]) tveeprom: Hauppauge: model = 44801, rev = D153, serial# = 6779291 tveeprom: tuner = LG TPI8NSR11F (idx = 53, type = 4) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x1000) tveeprom: audio_processor = None (type = 0) bttv0: using tuner=4 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found bttv0: i2c: checking for TDA9887 @ 0x86... not found bttv0: registered device video0 bttv0: registered device vbi0 bttv0: PLL: 28636363 => 35468950 .. ok Cheers, //John ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
[mythtv-users] LG TPI8NSR11F tuner?
Good day all - New to the list, etc, etc. I am attempting to get my Hauppauge TV (model 44801, see dmesg info) card up and running with mythtv, but have had little to no success. I cannot seem to find a tuner in CARDLIST.tuner that fits the LG TPI8NSR11F tuner chip on my card. I have googled the tuner and have found that it is indeed listed in the tveeprom module sourcecode, but I am not quite sure how to activate it. I have tried tuners (from CARDLIST.tuner) 2, 27, 37, and 39 with little to no success. At best, I can only lock onto one channel (which is half scrambled anyway). Below is the information from dmesg when I run "modprobe bttv card=10". My kernel is 2.6.12-gentoo-r9. TIA for the help. bttv: driver version 0.9.15 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI Interrupt :01:07.0[A] -> Link [LNK4] -> GSI 5 (level, low) -> IRQ 5 bttv0: Bt878 (rev 17) at :01:07.0, irq: 5, latency: 32, mmio: 0xdc00 bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb bttv0: using: Hauppauge (bt878) [card=10,insmod option] bttv0: gpio: en=, out= in=00db [init] bttv0: Hauppauge/Voodoo msp34xx: reset line init [5] tuner 0-0061: chip found @ 0xc2 (bt878 #0 [sw]) tveeprom: Hauppauge: model = 44801, rev = D153, serial# = 6779291 tveeprom: tuner = LG TPI8NSR11F (idx = 53, type = 4) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x1000) tveeprom: audio_processor = None (type = 0) bttv0: using tuner=4 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found bttv0: i2c: checking for TDA9887 @ 0x86... not found bttv0: registered device video0 bttv0: registered device vbi0 bttv0: PLL: 28636363 => 35468950 .. ok Cheers, //John ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
