Re: [mythtv-users] Plextor PX-TV402U not recognized by KnoppMythTv
... >Following this you should see a message like "go7007: >registering new >Plextor PX-TV402U-NA" or something. Since you're not, >it looks like >the modules are installed incorrectly. Try running >"modprobe go7007-usb" to >load the modules manually. -Nathan I made a lot of progress again ;-) The "modprobe go7007-usb" did not work, the modules were not there. I downloaded the official drivers from Plextor and tried to compile them. At first there was an error when executing the "make" command but it was easy to fix by "bz2unzipping" the kernel source. The drivers compiled well with "make install". The /var/log/messages after a disconnect and reconnect looked promising: kernel: usb 3-1: USB disconnect, address 6 kernel: usb 3-1: new high speed USB device using ehci_hcd and address 7 usb.agent[4971]: wis-ezusb: loaded successfully /etc/hotplug/usb/wis-ezusb: load /usr/lib/hotplug/firmware/ezusb/hpi_PX-TV402U.hex for 93b/a004/1 to /proc/bus/usb/003/007 kernel: usb 3-1: USB disconnect, address 7 kernel: usb 3-1: new high speed USB device using ehci_hcd and address 8 kernel: go7007: registering new Plextor PX-TV402U-EU kernel: wis-sony-tuner: type set to 200 (Sony PAL+SECAM (BTF-PG472Z)) usb.agent[5037]: go7007-usb: loaded successfully kernel: usbcore: registered new driver go7007 I tried the gorecord app, but it complained it could not find an OSS audio device. A quick search on the internet learned me that I had to execute "modprobe snd_pcm_oss". It loaded ! Again I tried the gorecord application by executing "gorecord -duration 60 test.avi". It returned the following output: /dev/video0 is a GO7007 device at USB address 3-1:1.0 Attempting to determine audio device...using audio device /dev/dsp1 Using input port Composite Capturing video at 640x480 VIDIOC_STREAMON: Input/output error I did a quick google search on the error but the returned articles such as "http://www.thedirks.org/v4l2/v4l2dsi.htm"; make me feel dizzy :-o I did not have a video source available at this time, but that should still produce a "black video and no sound" avi file. The readme file of the Plextor Linux driver package points out: "the error messages produced by gorecord and recorded in the system log (usually in /var/log/messages) should provide information to help resolve the problem" but there are no errors reported in the messages file. Any hints ? Peter ___ How much free photo storage do you get? Store your holiday snaps for FREE with Yahoo! Photos http://uk.photos.yahoo.com ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] Plextor PX-TV402U not recognized by KnoppMythTv
Nathan, There is some progress. If I unplug the usb connector and plug it back in, something (the driver ? or some part of the driver. I thought the driver itself was called "go7007") gets loaded by "hotplug". >From /var/log/messages : May 1 10:08:40 mythtvbox kernel: usb 3-1: USB disconnect, address 2 May 1 10:08:43 mythtvbox kernel: usb 3-1: new high speed USB device using ehci_hcd and address 5 May 1 10:08:44 mythtvbox usb.agent[4333]: wis-ezusb: loaded successfully May 1 10:08:44 mythtvbox /etc/hotplug/usb/wis-ezusb: load /usr/lib/hotplug/firmware/ezusb/hpi_PX-TV402U.hex for 93b/a004/1 to /proc/bus/usb/003/005 And from /var/log/messages/syslog: May 1 10:08:40 mythtvbox kernel: usb 3-1: USB disconnect, address 2 May 1 10:08:43 mythtvbox kernel: usb 3-1: new high speed USB device using ehci_hcd and address 5 May 1 10:08:44 mythtvbox usb.agent[4333]: wis-ezusb: loaded successfully May 1 10:08:44 mythtvbox /etc/hotplug/usb/wis-ezusb: load /usr/lib/hotplug/firmware/ezusb/hpi_PX-TV402U.hex for 93b/a004/1 to /proc/bus/usb/003/005 May 1 10:08:44 mythtvbox kernel: usb 3-1: USB disconnect, address 5 May 1 10:08:45 mythtvbox kernel: usb 3-1: new high speed USB device using ehci_hcd and address 6 However, after running Myth setup, it seems that /dev/video0 was not created. From mythbackend.log: 2005-05-01 10:05:43.592 New DB connection, total: 2 2005-05-01 10:05:43.683 Channel(/dev/video0)::Open(): Can't open video device, error "No such device" 2005-05-01 10:05:43.706 Channel(/dev/video0)::Open(): Can't open video device, error "No such device" 2005-05-01 10:05:43.711 ChannelBase: Could not find input: Television on card when setting channel 3 >It sounds like the drivers for the Plextor or >something related are not >installed. Is there a location(s) on the filesystem I could check to see whether all the necessary components of the driver are there ? >Check also /var/log/syslog and `dmesg`. You should >at least see a >message >like "new high speed USB device" when the Plextor is >connect to the USB >bus. -Nathan The following is from the /var/log/dmesg : ohci_hcd :00:02.1: nVidia Corporation nForce2 USB Controller (#2) PCI: Setting latency timer of device :00:02.1 to 64 ohci_hcd :00:02.1: irq 21, pci mem 0xea086000 ohci_hcd :00:02.1: new USB bus registered, assigned bus number 2 usb 1-1: new full speed USB device using ohci_hcd and address 2 usb 1-2: new full speed USB device using ohci_hcd and address 3 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected Initializing USB Mass Storage driver... usb 1-3: new low speed USB device using ohci_hcd and address 4 usbcore: registered new driver usb-storage USB Mass Storage support registered. ieee1394: Initialized config rom entry `ip1394' ohci1394: $Rev: 1223 $ Ben Collins <[EMAIL PROTECTED]> usbcore: registered new driver hiddev ACPI: PCI Interrupt Link [APCM] enabled at IRQ 20 ACPI: PCI interrupt :00:0d.0[A] -> GSI 20 (level, high) -> IRQ 20 PCI: Setting latency timer of device :00:0d.0 to 64 input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-:00:02.0-3 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[ea084000-ea0847ff] Max Packet=[2048] Real Time Clock Driver v1.12 Thanks for the help, Peter Send instant messages to your online friends http://uk.messenger.yahoo.com ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
[mythtv-users] Plextor PX-TV402U not recognized by KnoppMythTv
A few days ago I decided to try out MythTv. As I am not very familiar with installing many different software packages in Linux, I downloaded the latest Knoppmyth release 5A15, which according to the changelog contains support for Plextor PX-M402U/PX-TV402U and includes MythTv 0.18 (http://mysettopbox.tv/CHANGELOG.txt) I did the manual install because I wanted to install KnoppMyth on a seperate disk than WinXp. It seems that the PX-TV402U is not recognized (by the kernel ? hotplug?). I had a look in /var/log/messages and saw that my USB mouse was recognized, but no messages such as "localhost kernel: go7007-usb: found a Plextor PX-M402U", as other users are getting (http://forums.divx.com/eve/ubb.x/a/tpc/f/996105602/m/349102152/r/349102152). Can anyone guide me through to get my PX-TV402U recognized ? I am not very familiar with kernels and kernel modules, but I am happy to learn about it ;-) >From /var/log/messages: Apr 30 22:50:41 mythtvbox syslogd 1.4.1#16: restart. Apr 30 22:50:41 mythtvbox kernel: klogd 1.4.1#16, log source = /proc/kmsg started. Apr 30 22:50:41 mythtvbox kernel: Inspecting /boot/System.map-2.6.11.7-chw-3 Apr 30 22:50:41 mythtvbox kernel: Loaded 32044 symbols from /boot/System.map-2.6.11.7-chw-3. Apr 30 22:50:41 mythtvbox kernel: Symbols match kernel version 2.6.11. Apr 30 22:50:41 mythtvbox kernel: No module symbols loaded - kernel modules not enabled. Apr 30 22:50:41 mythtvbox kernel: Linux version 2.6.11.7-chw-3 ([EMAIL PROTECTED]) (gcc version 3.3.5 (Debian 1:3.3.5-12)) #1 SMP Tue Apr 19 17:46:47 PDT 2005 >From /var/log/mythtv/mythbackend.log: QSettings: error creating /.qt QSettings::sync: filename is null/empty 2005-04-30 16:42:23.823 New DB connection, total: 1 2005-04-30 16:42:23.860 Setting Lock for Database Schema upgrade. If you see a long pause here it means the Schema is already locked and is being upgraded by another Myth process. QSettings: error creating /.qt QSettings::sync: filename is null/empty 2005-04-30 16:42:23.868 New DB connection, total: 2 2005-04-30 16:42:23.871 Upgrading to schema version 1072 QSettings: error creating /.qt QSettings::sync: filename is null/empty 2005-04-30 16:42:23.911 New DB connection, total: 3 2005-04-30 16:42:23.914 Upgrading to schema version 1073 2005-04-30 16:42:23.923 Upgrading to schema version 1074 2005-04-30 16:42:23.931 Upgrading to schema version 1075 2005-04-30 16:42:23.951 Upgrading to schema version 1076 2005-04-30 16:42:23.978 Upgrading to schema version 1077 2005-04-30 16:42:23.986 Upgrading to schema version 1078 2005-04-30 16:42:23.990 Upgrading to schema version 1079 2005-04-30 16:42:24.000 Upgrading to schema version 1080 2005-04-30 16:42:24.009 Upgrading to schema version 1081 2005-04-30 16:42:24.031 Upgrading to schema version 1082 2005-04-30 16:42:24.142 Upgrading to schema version 1083 2005-04-30 16:42:24.151 Database Schema upgrade complete, unlocking. No setting found for this machine's BackendServerIP. Please run setup on this machine and modify the first page of the general settings. QSettings: error creating /root/.qt QSettings::sync: filename is null/empty 2005-04-30 16:46:58.553 New DB connection, total: 1 Starting up as the master server. QSettings: error creating /root/.qt QSettings::sync: filename is null/empty 2005-04-30 16:46:58.610 New DB connection, total: 2 2005-04-30 16:46:58.635 Channel(/dev/video0)::Open(): Can't open video device, error "No such device" 2005-04-30 16:46:58.658 Channel(/dev/video0)::Open(): Can't open video device, error "No such device" 2005-04-30 16:46:58.661 ChannelBase: Could not find input: Television on card when setting channel 3 Send instant messages to your online friends http://uk.messenger.yahoo.com ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users