Hello Everybody,
I just reinstalled my server with FC3 (from RH9) using Jarod's Guide.
Everything is running except IVTV (i.e. cannot watch TV).
Here is a snip from my /var/log/messages after loading ivtv:
*
Dec 4 15:57:51 24 kernel: ivtv: i2c client addr: 0x50 not found!
Dec 4 15:57:51 24 kernel: ivtv: Error -19 reading Hauppauge eeprom.
Dec 4 15:57:51 24 kernel: ivtv: Possible causes: the tveeprom module was not
loaded, or
Dec 4 15:57:51 24 kernel: ivtv: the eeprom kernel module was loaded before the
tveeprom module.
*
Any ideas what is causing the error reading eeprom?
Thanks,
Jeff
Here is the full version of messages if it helps any:
Dec 4 15:57:49 24 kernel: ivtv: START INIT IVTV
Dec 4 15:57:49 24 kernel: ivtv: version 0.1.10
(0.1.10-48.3_pre2_ck100zz.rhfc3.at) loading
Dec 4 15:57:49 24 kernel: ivtv: Linux version: 2.6.9-1.681_FC3 686 REGPARM
4KSTACKS gcc-3.4
Dec 4 15:57:49 24 kernel: ivtv: In case of problems please include the debug
info
Dec 4 15:57:49 24 kernel: ivtv: between the START INIT IVTV and END INIT IVTV
lines when
Dec 4 15:57:49 24 kernel: ivtv: mailing the ivtv-devel mailinglist.
Dec 4 15:57:49 24 kernel: ivtv: Autodetected WinTV PVR 250 card
Dec 4 15:57:49 24 kernel: ivtv: Found an iTVC16 based chip
Dec 4 15:57:49 24 kernel: ACPI: PCI interrupt :00:0c.0[A] - GSI 11
(level, low) - IRQ 11
Dec 4 15:57:49 24 kernel: ivtv: pci: VIA detected device: 0x0305 vendor: 0x1106
Dec 4 15:57:49 24 kernel: ivtv: i2c attach [client=eeprom,ok]
Dec 4 15:57:50 24 last message repeated 7 times
Dec 4 15:57:50 24 kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c
driver #0
Dec 4 15:57:50 24 kernel: ivtv: i2c attach [client=(tuner unset),ok]
Dec 4 15:57:50 24 kernel: tuner: type set to 2 (Philips NTSC (FI1236,FM1236
and compatibles)) by insmod option
Dec 4 15:57:50 24 kernel: tuner: The type=n insmod option will go away soon.
Dec 4 15:57:50 24 kernel: tuner: Please use the tuner=n option provided by
Dec 4 15:57:50 24 kernel: tuner: tv aard core driver (bttv, saa7134, ...)
instead.
Dec 4 15:57:50 24 kernel: saa7115: starting probe for adapter ivtv i2c driver
#0 (0x10005)
Dec 4 15:57:50 24 kernel: saa7115: detecting saa7115 client on address 0x42
Dec 4 15:57:50 24 kernel: saa7115: writing init values
Dec 4 15:57:50 24 kernel: ivtv: i2c attach [client=saa7115[6],ok]
Dec 4 15:57:50 24 kernel: saa7115: status: (1E) 0x95, (1F) 0xb1
Dec 4 15:57:51 24 kernel: msp34xx: init: chip=MSP3435G-B6 +nicam +simple
+simpler +radio mode=simpler
Dec 4 15:57:51 24 kernel: ivtv: i2c attach [client=MSP3435G-B6,ok]
Dec 4 15:57:51 24 kernel: ivtv: i2c client addr: 0x50 not found!
Dec 4 15:57:51 24 kernel: ivtv: Error -19 reading Hauppauge eeprom.
Dec 4 15:57:51 24 kernel: ivtv: Possible causes: the tveeprom module was not
loaded, or
Dec 4 15:57:51 24 kernel: ivtv: the eeprom kernel module was loaded before the
tveeprom module.
Dec 4 15:57:52 24 kernel: ivtv: Encoder revision: 0x02040024
Dec 4 15:57:52 24 kernel: ivtv: Configuring WinTV PVR 250 card with 4 streams
Dec 4 15:57:52 24 kernel: ivtv: Create DMA stream 0 using 128 buffers of size
32768
Dec 4 15:57:52 24 kernel: ivtv: Create DMA stream 1 using 128 buffers of size
32768
Dec 4 15:57:52 24 kernel: ivtv: Create stream 2 using 128 buffers of size 52224
Dec 4 15:57:52 24 kernel: ivtv: Create DMA stream 3 using 128 buffers of size
32768
Dec 4 15:57:52 24 kernel: ivtv: Could not detect tuner standard, defaulting to
NTSC.
Dec 4 15:57:52 24 kernel: ivtv: Setting audio matrix to input 3, output 1
Dec 4 15:57:52 24 kernel: ivtv: Switching standard to NTSC.
Dec 4 15:57:52 24 kernel: saa7115: decoder set norm NTSC
Dec 4 15:57:52 24 kernel: saa7115: set audio: 0x01
Dec 4 15:57:52 24 kernel: ivtv: Initialized WinTV PVR 250, card #0
Dec 4 15:57:52 24 kernel: ivtv: END INIT IVTV
___
mythtv-users mailing list
[EMAIL PROTECTED]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
