Re: [mythtv-users] [OT] How may bytes available on a single layer DVD-R?
Not marketspeak anymore. Drive makers have been doing it long enough that it's not "weird" anymore, like it used to be. http://physics.nist.gov/cuu/Units/binary.html When computers work in base 10, then it stops being weird >:-( -- Agreed. I know of the formalization of 2^10 = KiB, etc. I chose not to sound like an idiot utting the words "Kibibyte" and "Mebibyte." Using invented words such as these confuse the people who are too ignorant to distinguish the difference, anyway. If they rolled off the tongue a bit easier (e.g. "kilibyte" and "megibyte") I might be more receptive, but they just sound stupid and are in almost all cases, redundant. To quote from that page: "It is important to recognize that the new prefixes for binary multiples are not part of the International System of Units (SI), the modern metric system. However, for ease of understanding and recall, they were derived from the SI prefixes for positive powers of ten. As can be seen from the above table, the name of each new prefix is derived from the name of the corresponding SI prefix by retaining the first two letters of the name of the SI prefix and adding the letters "bi," which recalls the word "binary." Similarly, the symbol of each new prefix is derived from the symbol of the corresponding SI prefix by adding the letter "i," which again recalls the word "binary." (For consistency with the other prefixes for binary multiples, the symbol Ki is used for 210 rather than ki.)" So again, I maintain that a blank DVD-R hold 4.38 GB of data. -Cory ("Flame on, Garth!") * * Cory Papenfuss* * Electrical Engineering candidate Ph.D. graduate student * * Virginia Polytechnic Institute and State University * * ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] [OT] How may bytes available on a single layer DVD-R?
On Sunday 13 March 2005 17:59, Ron Johnson wrote: > On Sun, 2005-03-13 at 12:02 -0500, Cory Papenfuss wrote: > > > How may bytes or MB is the capacity of a DVD-R disc? I am currently > > > using a guessitimate of 4250MB as the limit for my shrinking routine > > > but it would be nice to have the actaul value for fine tuning. > > > > It's commonly referred to as 4.7 GB. Of course, that's 4.7 GB in > > marketspeak, which means its 4,700,000,000 bytes. In *real* GB, divide > > by 2^30 = (1024*1024*1024) = 1073741824. For MB, divide by 2^20. > > > > Thus, it's > > 4.7e9/2^30 = 4.377 GB, or > > 4.7e9/2^20 = 4482 MB > > Not marketspeak anymore. Drive makers have been doing it long > enough that it's not "weird" anymore, like it used to be. > > http://physics.nist.gov/cuu/Units/binary.html When computers work in base 10, then it stops being weird >:-( -- Steve Boddy ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] [OT] How may bytes available on a single layer DVD-R?
On Sun, 2005-03-13 at 12:02 -0500, Cory Papenfuss wrote: > > How may bytes or MB is the capacity of a DVD-R disc? I am currently using a > > guessitimate of 4250MB as the limit for my shrinking routine but it would be > > nice to have the actaul value for fine tuning. > > > It's commonly referred to as 4.7 GB. Of course, that's 4.7 GB in > marketspeak, which means its 4,700,000,000 bytes. In *real* GB, divide by > 2^30 = (1024*1024*1024) = 1073741824. For MB, divide by 2^20. > > Thus, it's > 4.7e9/2^30 = 4.377 GB, or > 4.7e9/2^20 = 4482 MB Not marketspeak anymore. Drive makers have been doing it long enough that it's not "weird" anymore, like it used to be. http://physics.nist.gov/cuu/Units/binary.html -- - Ron Johnson, Jr. Jefferson, LA USA PGP Key ID 8834C06B I prefer encrypted mail. "No drug, not even alcohol, causes the fundamental ills of society. If we're looking for the sources of our troubles, we shouldn't test people for drugs, we should test them for stupidity, ignorance, greed and love of power." P. J. O'Rourke signature.asc Description: This is a digitally signed message part ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] [OT] How may bytes available on a single layer DVD-R?
How may bytes or MB is the capacity of a DVD-R disc? I am currently using a guessitimate of 4250MB as the limit for my shrinking routine but it would be nice to have the actaul value for fine tuning. It's commonly referred to as 4.7 GB. Of course, that's 4.7 GB in marketspeak, which means its 4,700,000,000 bytes. In *real* GB, divide by 2^30 = (1024*1024*1024) = 1073741824. For MB, divide by 2^20. Thus, it's 4.7e9/2^30 = 4.377 GB, or 4.7e9/2^20 = 4482 MB -Cory * * Cory Papenfuss* * Electrical Engineering candidate Ph.D. graduate student * * Virginia Polytechnic Institute and State University * * ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
[mythtv-users] [OT] How may bytes available on a single layer DVD-R?
This is fairly off topic but since its for my mythtv dvd burning software it may interest someone else too. How may bytes or MB is the capacity of a DVD-R disc? I am currently using a guessitimate of 4250MB as the limit for my shrinking routine but it would be nice to have the actaul value for fine tuning. Thanks for the help guys. Bill ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users