Ivtv has no sound. Everything else seems to be fine.
I have played with the alsamixer settings
/var/log/dmesg:
Freeing unused kernel memory: 160k freed
tveeprom: no version for struct_module found:
kernel tainted.
saa7127: video encoder driver version V 0.3 loaded
Linux video capture interface: v1.00
ivtv: START INIT IVTV
ivtv: version 0.2.0 (rc3e) loading
ivtv: Linux version: 2.6.10-1.760_FC3 686 REGPARM 4KSTACKS
gcc-3.4
ivtv: In case of problems please include the debug info
ivtv: between the START INIT IVTV and END INIT IVTV lines
when
ivtv: mailing the ivtv-devel mailinglist.
ivtv: Autodetected WinTV PVR 350 card
ivtv: Found an iTVC15 based chip
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI interrupt :02:0a.0[A] - GSI 9 (level, low)
- IRQ 9
ivtv: Unreasonably low latency timer, setting to 64 (was 32)
ivtv: XXX PCI device: 0x2560 vendor: 0x8086
tveeprom: Hauppauge: model = 48132, rev = J323, serial# =
6565319
tveeprom: tuner = Philips FM1236 (idx = 23, type = 2)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 =
0x1000)
tveeprom: audio_processor = MSP3440 (type = 11)
ivtv: i2c attach [client=tveeprom[0],ok]
saa7115: starting probe for adapter ivtv i2c driver #0
(0x10005)
saa7115: detecting saa7115 client on address 0x42
saa7115: writing init values
ivtv: i2c attach [client=saa7115[0],ok]
saa7115: status: (1E) 0x01, (1F) 0xc0
tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0
ivtv: i2c attach [client=(tuner unset),ok]
saa7127: Selecting NTSC video Standard
saa7127: Selecting S-Video+Composite
saa7127: Turn WSS off
saa7127: Widescreen Mode 4:3 Full Format
saa7127: Selecting Normal Encoder Input
saa7127: Enable Video Output
ivtv: i2c attach [client=saa7127[0],ok]
ivtv: Tuner Type 2, Tuner formats 0x1000, Radio: yes,
Model 0x00a93493, Revision 0x0001
ivtv: NTSC tuner detected
ivtv: Radio detected
ivtv: Encoder revision: 0x02040024
ivtv: Encoder Firmware is buggy, use version 0x02040011
ivtv: Decoder revision: 0x02020023
ivtv: Configuring WinTV PVR 350 card with 9 streams
ivtv: Create DMA stream 0 using 256 16384 byte buffers
4194304 kbytes total
ivtv: Registered v4l2 device, streamtype 0 minor 0
ivtv: Create DMA stream 1
ivtv: Registered v4l2 device, streamtype 1 minor 32
ivtv: Create stream 2 using 40 52224 byte buffers 2097152
kbytes total
ivtv: Registered v4l2 device, streamtype 2 minor 224
ivtv: Create DMA stream 3 using 455 4608 byte buffers
2097152 kbytes total
ivtv: Registered v4l2 device, streamtype 3 minor 24
ivtv: Create stream 4
ivtv: Registered v4l2 device, streamtype 4 minor 64
ivtv: Create DMA stream 5 using 16 65536 byte buffers
1048576 kbytes total
ivtv: Registered v4l2 device, streamtype 5 minor 16
ivtv: Create stream 6 using 1024 2048 byte buffers 262144
kbytes total
ivtv: Registered v4l2 device, streamtype 6 minor 228
ivtv: Create stream 7
ivtv: Registered v4l2 device, streamtype 7 minor 232
ivtv: Create DMA stream 8
ivtv: Registered v4l2 device, streamtype 8 minor 48
ivtv: Setting Tuner 2
tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and
compatibles)) by ivtv i2c driver #0
ivtv: Setting audio matrix to input 3, output 1
ivtv: i2c client addr: 0x40 not found!
ivtv: Switching standard to NTSC.
ivtv: i2c client addr: 0x40 not found!
saa7115: decoder set norm NTSC
saa7115: set audio: 0x01
saa7127: Setting Encoder Video Standard
saa7127: Set NTSC Video Mode
saa7127: Selecting NTSC video Standard
ivtv: ivtv_enc_thread: pid = 522, itv = 0xe8969020
ivtv: ivtv_dec_thread: pid = 523, itv = 0xe8969020
ivtv: Initialized WinTV PVR 350, card #0
ivtv: END INIT IVTV
ivtv-osd: Framebuffer module loaded (attached to ivtv card
id 0)
ivtv-osd: Framebuffer is at decoder-relative address
0x0051 and has 1704960 bytes.
spurious 8259A interrupt: IRQ7.
ivtv-osd: screen coords: [0 0] - [720 480]
ivtv-osd: original global alpha = 208
ivtv-osd: current OSD state = 39
ivtv-osd: new global alpha = 208 (1 255 0)
ivtv-osd: framebuffer at 0xe151, mapped to 0xe981,
size 1350k
ivtv-osd: mode is 720x480x32, linelength=2880
Console: switching to colour frame buffer device 90x30
ivtv-osd: fb0: iTVC15 TV out frame buffer device
kjournald starting. Commit interval 5 seconds
/var/log/messages:
Feb 10 01:57:11 tv kernel: ivtv: i2c client addr: 0x40 not
found!
Feb 10 01:57:11 tv kernel: saa7115: decoder disable output
Feb 10 01:57:11 tv kernel: ivtv: i2c client addr: 0x40 not
found!
Feb 10 01:57:11 tv kernel: saa7115: decoder enable output
Feb 10 01:57:11 tv xfs[4542]: ignoring font path element
/usr/X11R6/lib/X11/fonts/Speedo (unreadable)
Feb 10 01:57:11 tv kernel: ivtv: i2c client addr: 0x40 not
found!
Feb 10 01:57:11 tv kernel: ivtv: i2c client addr: 0x40 not
found!
___