Re: [mythtv-users] RE: Help: issues in trying to enable DMA on hard drives for mythtv...
Robert, I gave you the wrong one. you want to use Device Drivers->ATA/ATAPI->SiS5513 to get DMA from the SiS chipsets. Pay special notice to the requirements in the info section of configuring the kernel. You need to enable a number of things, all of which are fairly obvious. The one I gave before was for VGA stuff. Sorry. - Mark On 6/2/05, Mark Knecht <[EMAIL PROTECTED]> wrote: > Robert, >Did you build you own kernel? Please check that you actually > enabled SiS support. Look under > > Device Drivers->Character Devices->SiS Chipset support > > I believe that's what would turn this on. > > Good luck, > Mark > > On 6/2/05, Robert McRostie <[EMAIL PROTECTED]> wrote: > > Thanks Mark. Just tried this and all worked except the DMA access. Gives > > the same error as before. Any other ideas? > > > > >/sbin/hdparm -c 3 -d 1 -m 16 -A1 /dev/hda > > > > > >This means: '-c 3' enables 32 bit transfers with sync through the pci > > >bus, '-d 1' enables DMA operation, '-m 16' turns on multisector > > >transfers (with 16 sectors) and '-A1' enables the driver read ahead > > >feature. > > > > > > Regards, > > Robert. > > > > ___ > > mythtv-users mailing list > > mythtv-users@mythtv.org > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > > > > > ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] RE: Help: issues in trying to enable DMA on hard drives for mythtv...
Robert, Did you build you own kernel? Please check that you actually enabled SiS support. Look under Device Drivers->Character Devices->SiS Chipset support I believe that's what would turn this on. Good luck, Mark On 6/2/05, Robert McRostie <[EMAIL PROTECTED]> wrote: > Thanks Mark. Just tried this and all worked except the DMA access. Gives the > same error as before. Any other ideas? > > >/sbin/hdparm -c 3 -d 1 -m 16 -A1 /dev/hda > > > >This means: '-c 3' enables 32 bit transfers with sync through the pci > >bus, '-d 1' enables DMA operation, '-m 16' turns on multisector > >transfers (with 16 sectors) and '-A1' enables the driver read ahead > >feature. > > > Regards, > Robert. > > ___ > mythtv-users mailing list > mythtv-users@mythtv.org > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
[mythtv-users] RE: Help: issues in trying to enable DMA on hard drives for mythtv...
Thanks Mark. Just tried this and all worked except the DMA access. Gives the same error as before. Any other ideas? >/sbin/hdparm -c 3 -d 1 -m 16 -A1 /dev/hda > >This means: '-c 3' enables 32 bit transfers with sync through the pci >bus, '-d 1' enables DMA operation, '-m 16' turns on multisector >transfers (with 16 sectors) and '-A1' enables the driver read ahead >feature. Regards, Robert. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users