Re: [mythtv-users] irw problems
That did it. I created my own lircd.conf using irrecord and am good to go. Thanks again. -Al On Jul 21, 2005, at 3:36 PM, Nick wrote: On 7/21/05, Al Furman [EMAIL PROTECTED] wrote: Yes. irrecord works as expected. Thanks, -Al On Jul 21, 2005, at 4:27 AM, Michael Jones wrote: Have you tried running irrecord? Al, I might suggest using irrecord to create a new temporary lircd.conf file to use when testing irw. At least this way you are using a config generated by your system 'as-it-is'. Record a few keys on the remote and then restart lircd with the new config. Also, when irw appears to not be working, check the status of the LIRC daemon - 'service lircd status' and make sure it reports it is OK. Nick ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] irw problems
Title: Re: [mythtv-users] irw problems Have you tried running irrecord? From: Al Furman [EMAIL PROTECTED] Reply-To: Discussion about mythtv mythtv-users@mythtv.org Date: Wed, 20 Jul 2005 23:28:40 -0400 To: mythtv-users@mythtv.org Subject: [mythtv-users] irw problems Thanks Nick. lircd is running and is writable. Any other thoughts? I am perplexed. [EMAIL PROTECTED] ~]$ ls -l /dev/lirc? crw--- 1 root root 61, 0 Jul 16 22:45 /dev/lirc0 srw-rw-rw- 1 root root 0 Jul 16 22:51 /dev/lircd -Al On Jul 19, 2005, at 3:39 AM, [EMAIL PROTECTED] wrote: Message: 5 Date: Tue, 19 Jul 2005 16:08:29 +1200 From: Nick Rout [EMAIL PROTECTED] Subject: Re: [mythtv-users] irw problems To: Discussion about mythtv mythtv-users@mythtv.org Message-ID: [EMAIL PROTECTED] Content-Type: text/plain; charset=US-ASCII irw watches /dev/lircd, which is not the same as /dev/lirc or /dev/lirc0 to have a valid /dev/lircd you need to have the daemon running. On Mon, 18 Jul 2005 23:11:42 -0400 Al Furman wrote: I am building a myth box using Jarod's guide and have been stuck getting lirc to work with the IR receiver from zapway.de. I can see signals from my remote using mode2 and when I cat /dev/lirc or /dev/lirc0. I see no signals when I run irw. There are no relevant errors in /var/log/messages or dmesg. I have tested using different remotes and lircd config files to no avail. I am going to try compiling lirc in debug mode next, but was wondering if anyone in the group had any suggestions I may be missing. Thanks -- Nick Rout ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] irw problems
Yes. irrecord works as expected. Thanks, -AlOn Jul 21, 2005, at 4:27 AM, Michael Jones wrote: Have you tried running irrecord?From: Al Furman [EMAIL PROTECTED] Reply-To: Discussion about mythtv mythtv-users@mythtv.org Date: Wed, 20 Jul 2005 23:28:40 -0400 To: mythtv-users@mythtv.org Subject: [mythtv-users] irw problems Thanks Nick. lircd is running and is writable. Any other thoughts? I am perplexed. [EMAIL PROTECTED] ~]$ ls -l /dev/lirc? crw--- 1 root root 61, 0 Jul 16 22:45 /dev/lirc0 srw-rw-rw- 1 root root 0 Jul 16 22:51 /dev/lircd -Al On Jul 19, 2005, at 3:39 AM, [EMAIL PROTECTED] wrote: Message: 5 Date: Tue, 19 Jul 2005 16:08:29 +1200 From: Nick Rout [EMAIL PROTECTED] Subject: Re: [mythtv-users] irw problems To: Discussion about mythtv mythtv-users@mythtv.org Message-ID: [EMAIL PROTECTED] Content-Type: text/plain; charset="US-ASCII" irw watches /dev/lircd, which is not the same as /dev/lirc or /dev/lirc0 to have a valid /dev/lircd you need to have the daemon running. On Mon, 18 Jul 2005 23:11:42 -0400 Al Furman wrote: I am building a myth box using Jarod's guide and have been stuck getting lirc to work with the IR receiver from zapway.de. I can see signals from my remote using mode2 and when I cat /dev/lirc or /dev/lirc0. I see no signals when I run irw. There are no relevant errors in /var/log/messages or dmesg. I have tested using different remotes and lircd config files to no avail. I am going to try compiling lirc in debug mode next, but was wondering if anyone in the group had any suggestions I may be missing. Thanks -- Nick Rout ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users ___mythtv-users mailing listmythtv-users@mythtv.orghttp://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] irw problems
On 7/21/05, Al Furman [EMAIL PROTECTED] wrote: Yes. irrecord works as expected. Thanks, -Al On Jul 21, 2005, at 4:27 AM, Michael Jones wrote: Have you tried running irrecord? Al, I might suggest using irrecord to create a new temporary lircd.conf file to use when testing irw. At least this way you are using a config generated by your system 'as-it-is'. Record a few keys on the remote and then restart lircd with the new config. Also, when irw appears to not be working, check the status of the LIRC daemon - 'service lircd status' and make sure it reports it is OK. Nick ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
[mythtv-users] irw problems
Thanks Nick. lircd is running and is writable. Any other thoughts? I am perplexed.[EMAIL PROTECTED] ~]$ ls -l /dev/lirc?crw--- 1 root root 61, 0 Jul 16 22:45 /dev/lirc0srw-rw-rw- 1 root root 0 Jul 16 22:51 /dev/lircd-AlOn Jul 19, 2005, at 3:39 AM, [EMAIL PROTECTED] wrote:Message: 5Date: Tue, 19 Jul 2005 16:08:29 +1200From: Nick Rout [EMAIL PROTECTED]Subject: Re: [mythtv-users] irw problemsTo: Discussion about mythtv mythtv-users@mythtv.orgMessage-ID: [EMAIL PROTECTED]Content-Type: text/plain; charset="US-ASCII"irw watches /dev/lircd, which is not the same as /dev/lirc or /dev/lirc0to have a valid /dev/lircd you need to have the daemon running.On Mon, 18 Jul 2005 23:11:42 -0400Al Furman wrote: I am building a myth box using Jarod's guide and have been stuck getting lirc to work with the IR receiver from zapway.de.I can see signals from my remote using mode2 and when I cat /dev/lirc or /dev/lirc0. I see no signals when I run irw. There are no relevant errors in /var/log/messages or dmesg. I have tested using different remotes and lircd config files to no avail. I am going to try compiling lirc in debug mode next, but was wondering if anyone in the group had any suggestions I may be missing.Thanks -- Nick Rout___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
[mythtv-users] irw problems
I am building a myth box using Jarod's guide and have been stuck getting lirc to work with the IR receiver from zapway.de. I can see signals from my remote using mode2 and when I cat /dev/lirc or /dev/lirc0. I see no signals when I run irw. There are no relevant errors in /var/log/messages or dmesg. I have tested using different remotes and lircd config files to no avail. I am going to try compiling lirc in debug mode next, but was wondering if anyone in the group had any suggestions I may be missing. Thanks ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] irw problems
irw watches /dev/lircd, which is not the same as /dev/lirc or /dev/lirc0 to have a valid /dev/lircd you need to have the daemon running. On Mon, 18 Jul 2005 23:11:42 -0400 Al Furman wrote: I am building a myth box using Jarod's guide and have been stuck getting lirc to work with the IR receiver from zapway.de. I can see signals from my remote using mode2 and when I cat /dev/lirc or /dev/lirc0. I see no signals when I run irw. There are no relevant errors in /var/log/messages or dmesg. I have tested using different remotes and lircd config files to no avail. I am going to try compiling lirc in debug mode next, but was wondering if anyone in the group had any suggestions I may be missing. Thanks -- Nick Rout ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users