Re: [mythtv-users] rate doesn't match error
On Wed, 23 Feb 2005 14:21:50 +0100 (CET), Nils Henrik Tvetene <[EMAIL PROTECTED]> wrote: > > I got the same problem. The sound works if I select "Continue without > audio" though, but annoying all the same. > Noone been able to figure this one out? > A rate entry in my .asoundrc doesnt seem todo anything. > > Regards, > > Nils Henrik Tvetene > > > > On Mon, 2005-02-21 at 23:06 -0500, Rick Ingersoll wrote: > >> I am running out of my pvr350 card. I have set the audio to be > >> ALSA:default. When I try to watch live tv, I get and error rate doesn't > >> match. expected 0 and got 4400. Anybody know the solution? > > > > I posted the same question last week and got a private response from > > Frank Riley: > > I suspect the following thread in mythtv-dev is the culprit: > > "audio init bug in NuppelVideoPlayer::StartPlaying". > > I've not had a chance to check try out though. > > > > The problem is that myth is detecting an audio rate of 0 (somehow), > > which is not supported by the sound hardware so the hardware gets set to > > the minimum rate that it supports and that is what gives the error. > > > > I wasn't able to trace through the code to find where the 0 comes from > > just by observation, I was planning to dig in with some debug stuff but > > never quite got round to it. > > > > Ian. > > I ran into a similar issue when I first set up MythTV a few days ago. I was seeing the continue without audio error. I'm pretty sure what fixed it for me was opening up kmix and turning off 'Mute'. I also disabled arts. Garry ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] rate doesn't match error
I got the same problem. The sound works if I select "Continue without audio" though, but annoying all the same. Noone been able to figure this one out? A rate entry in my .asoundrc doesnt seem todo anything. Regards, Nils Henrik Tvetene > On Mon, 2005-02-21 at 23:06 -0500, Rick Ingersoll wrote: >> I am running out of my pvr350 card. I have set the audio to be >> ALSA:default. When I try to watch live tv, I get and error rate doesn't >> match. expected 0 and got 4400. Anybody know the solution? > > I posted the same question last week and got a private response from > Frank Riley: > I suspect the following thread in mythtv-dev is the culprit: > "audio init bug in NuppelVideoPlayer::StartPlaying". > I've not had a chance to check try out though. > > The problem is that myth is detecting an audio rate of 0 (somehow), > which is not supported by the sound hardware so the hardware gets set to > the minimum rate that it supports and that is what gives the error. > > I wasn't able to trace through the code to find where the 0 comes from > just by observation, I was planning to dig in with some debug stuff but > never quite got round to it. > > Ian. > > -- > Ian Campbell > > The first rule of intelligent tinkering is to save all the parts. > -- Paul Erlich > ___ > mythtv-users mailing list > mythtv-users@mythtv.org > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] rate doesn't match error
On Mon, 2005-02-21 at 23:06 -0500, Rick Ingersoll wrote: > I am running out of my pvr350 card. I have set the audio to be > ALSA:default. When I try to watch live tv, I get and error rate doesn't > match. expected 0 and got 4400. Anybody know the solution? I posted the same question last week and got a private response from Frank Riley: I suspect the following thread in mythtv-dev is the culprit: "audio init bug in NuppelVideoPlayer::StartPlaying". I've not had a chance to check try out though. The problem is that myth is detecting an audio rate of 0 (somehow), which is not supported by the sound hardware so the hardware gets set to the minimum rate that it supports and that is what gives the error. I wasn't able to trace through the code to find where the 0 comes from just by observation, I was planning to dig in with some debug stuff but never quite got round to it. Ian. -- Ian Campbell The first rule of intelligent tinkering is to save all the parts. -- Paul Erlich signature.asc Description: This is a digitally signed message part ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
[mythtv-users] rate doesn't match error
I am running out of my pvr350 card. I have set the audio to be ALSA:default. When I try to watch live tv, I get and error rate doesn't match. expected 0 and got 4400. Anybody know the solution? Rick ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
