Re: [mythtv-users] tv_grab_au, Canberra and associated oddities.
Well, I have mythtv basically working, but scanning for the ABC and SBS channels does not work. All the commercial channels are there (WIN, SC10, Prime). I'm suspecting that it's because of the DiG and SBS DVB radio stations freaking out the scanning code (I compiled the 0.18.1 source tarballs) . Has anyone entered these in by hand and can send me a DB dump? Stephen PS - It's interesting to see that it uses less CPU when displayhing than Xine. The high-def channels seem to use about 40% (with XvMC on an Nvidia 5200 with an Athlon XP 2600+) where Xine would use about 60% and stutter. On 7/6/05, Christopher Yeoh [EMAIL PROTECTED] wrote: At 2005/7/6 14:06+1000 Stephen Hocking writes: I have a mythtv setup in Canberra using a DVB card. The channels listed by the card using tzap friends have little in common with the stuff retrieved via d1.com.au. Channels titles are different, channels exist in one but not the other, etc. Has anyone got a better source of channel info? I can hand edit the channel info in the DB, so that the program updates go in the right place, but compared to the setup I had working over in the US, it is a little frustrating. I just did the same sort of setup on the weekend. The document here: http://www.gavinj.net/geek/mythtv_setup.txt is pretty good for Canberra. For guide data I'd recommend http://www.tv.guide.org.au and there is a tv_grab_au_tuhs script which you can use. Chris -- [EMAIL PROTECTED] ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
RE: [mythtv-users] tv_grab_au, Canberra and associated oddities.
Hi Stephen, Not sure why it's doing that actually, when I set this up the scanning code did list the radio channels but listed them as ignored because they were radio streams. I used the same procedure that was described in the list a couple of days ago, by specifying the transport stream then doing a Scan of existing transports and chose the correct transport stream. I'm not at home at the moment and am in the Wollongong area but if you still want the channel dump I can send it through. :) Cheers, Daniel IceTV Support Team IceTV Pty Limited Level 2/34-36 Chandos Street, St Leonards, NSW 2065 PO Box 698, Crows Nest, NSW 1585, Sydney, Australia ph: 1300 654 803 fax: 1300 654 208 www.icetv.com.au CAUTION - This message may contain privileged and confidential information intended only for the use of the addressee named above. If you are not the intended recipient of this message you are hereby notified that any use, disclosure, dissemination, copying, distribution or any action taken or omitted to be taken in reliance on it is prohibited and may be unlawful. If you have received this message in error please notify IceTV immediately via email at [EMAIL PROTECTED] or by phone at 1300 654 803. -Original Message- From: Stephen Hocking [mailto:[EMAIL PROTECTED] Sent: Friday, 8 July 2005 9:24 AM To: Christopher Yeoh Cc: Discussion about mythtv; [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: Re: [mythtv-users] tv_grab_au, Canberra and associated oddities. Well, I have mythtv basically working, but scanning for the ABC and SBS channels does not work. All the commercial channels are there (WIN, SC10, Prime). I'm suspecting that it's because of the DiG and SBS DVB radio stations freaking out the scanning code (I compiled the 0.18.1 source tarballs) . Has anyone entered these in by hand and can send me a DB dump? Stephen PS - It's interesting to see that it uses less CPU when displayhing than Xine. The high-def channels seem to use about 40% (with XvMC on an Nvidia 5200 with an Athlon XP 2600+) where Xine would use about 60% and stutter. On 7/6/05, Christopher Yeoh [EMAIL PROTECTED] wrote: At 2005/7/6 14:06+1000 Stephen Hocking writes: I have a mythtv setup in Canberra using a DVB card. The channels listed by the card using tzap friends have little in common with the stuff retrieved via d1.com.au. Channels titles are different, channels exist in one but not the other, etc. Has anyone got a better source of channel info? I can hand edit the channel info in the DB, so that the program updates go in the right place, but compared to the setup I had working over in the US, it is a little frustrating. I just did the same sort of setup on the weekend. The document here: http://www.gavinj.net/geek/mythtv_setup.txt is pretty good for Canberra. For guide data I'd recommend http://www.tv.guide.org.au and there is a tv_grab_au_tuhs script which you can use. Chris -- [EMAIL PROTECTED] ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] tv_grab_au, Canberra and associated oddities.
Daniel Hall wrote: Hi Stephen, In Australia there is also a commercial EPG service available that has support for MythTV (with full HowTo documents as well) and Canberra is also available. I actually use this system with my MythTV setup at home. :) Full details can be found at http://www.icetv.com.au/ Regards, Daniel IceTV Support Team Yeah, *COUGH* $12 per month Is that correct! ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
[mythtv-users] tv_grab_au, Canberra and associated oddities.
All, I have a mythtv setup in Canberra using a DVB card. The channels listed by the card using tzap friends have little in common with the stuff retrieved via d1.com.au. Channels titles are different, channels exist in one but not the other, etc. Has anyone got a better source of channel info? I can hand edit the channel info in the DB, so that the program updates go in the right place, but compared to the setup I had working over in the US, it is a little frustrating. Stephen ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] tv_grab_au, Canberra and associated oddities.
At 2005/7/6 14:06+1000 Stephen Hocking writes: I have a mythtv setup in Canberra using a DVB card. The channels listed by the card using tzap friends have little in common with the stuff retrieved via d1.com.au. Channels titles are different, channels exist in one but not the other, etc. Has anyone got a better source of channel info? I can hand edit the channel info in the DB, so that the program updates go in the right place, but compared to the setup I had working over in the US, it is a little frustrating. I just did the same sort of setup on the weekend. The document here: http://www.gavinj.net/geek/mythtv_setup.txt is pretty good for Canberra. For guide data I'd recommend http://www.tv.guide.org.au and there is a tv_grab_au_tuhs script which you can use. Chris -- [EMAIL PROTECTED] ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
RE: [mythtv-users] tv_grab_au, Canberra and associated oddities.
Hi Stephen, In Australia there is also a commercial EPG service available that has support for MythTV (with full HowTo documents as well) and Canberra is also available. I actually use this system with my MythTV setup at home. :) Full details can be found at http://www.icetv.com.au/ Regards, Daniel IceTV Support Team IceTV Pty Limited Level 2/34-36 Chandos Street, St Leonards, NSW 2065 PO Box 698, Crows Nest, NSW 1585, Sydney, Australia ph: 1300 654 803 fax: 1300 654 208 www.icetv.com.au IceTV Community Forums CAUTION - This message may contain privileged and confidential information intended only for the use of the addressee named above. If you are not the intended recipient of this message you are hereby notified that any use, disclosure, dissemination, copying, distribution or any action taken or omitted to be taken in reliance on it is prohibited and may be unlawful. If you have received this message in error please notify IceTV immediately via email at [EMAIL PROTECTED] or by phone at 1300 654 803. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Stephen Hocking Sent: Wednesday, 6 July 2005 2:06 PM To: mythtv-users@mythtv.org Subject: [mythtv-users] tv_grab_au, Canberra and associated oddities. All, I have a mythtv setup in Canberra using a DVB card. The channels listed by the card using tzap friends have little in common with the stuff retrieved via d1.com.au. Channels titles are different, channels exist in one but not the other, etc. Has anyone got a better source of channel info? I can hand edit the channel info in the DB, so that the program updates go in the right place, but compared to the setup I had working over in the US, it is a little frustrating. Stephen ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] tv_grab_au, Canberra and associated oddities.
Hi Stephen, I've been using the ninemsn grabber for Sydney at: http://immir.com/tv_grab_au which I find works much better than the d1.com.au grabber, plus it also has info for ABC2 SBS news. You may also want to check this page out: http://www.cse.unsw.edu.au/~willu/xmltv/ Cheers, Adrian. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
