Re: [mythtv-users] Re: New MCE 2005 Remote
On 5/31/05, Cenk Ozkan <[EMAIL PROTECTED]> wrote: > Sorry guys, > > Here is my email to Martin. > > Cenk Ozkan wrote: > > Hi Martin, > > > > I am trying your mceusb driver for my Media Centre 2005 remote and am > > having intermittend failures. My setup is as follows: > > > > Fedora Core 3 ( 2.6.11-1.14_FC3smp) > > Followed Jarod Wilsons guide initially to set everything up including > > getting Axel Thimms rpm's for everything. Since then I have manually > > compiled Xine followed by IVTV and now LIRC to get my MCE remote going. > > > > I am using lirc 0.7.0 from source and your > > http://blatter.com/mceusb/mceusb.0.22-20050521.tar.bz2 file, I have > > also tried http://blatter.com/mceusb/mceusb.0.21-20050401.tar.bz2 both > > with same results. Here is what happens: > > > > All compiles and install's fine , I followed your instructions > > religiously. After first installation I reboot and everything works > > perfectly. I use irw to capture the keypresses and mythtv runs great > > with it. Then I reboot and it stops working. Irw still waits for > > keypresses (ie no error) but keypresses no longer show up and mythtv > > also doesnt work. If I keep restarting the system (after about 3-4 > > times) it all works again ?? What is it doing, I cant see anything in > > /var/log/messages, is there a workaround ? > > > > Please help. > > > > BTW great work getting this damn remote working. Thanks. > > > > Regards > > Cenk > I'm having this exact problem with a Philips MCE 2005 remote on my Pundit-R. I tried turning off the computer and unplug the power, no help! I'm so tired of this Pundit-R, causing me so much trouble: 1. this remote problem (there was no problem before on my full-size Dell desktop). 2. the ATI Xvideo problem with 1080i--Pink stripe on the right of the screen. 3. IRQ/DMA issues with PVR-500MCE--Machine hangs frequently. I'll give it another chance after FC4 comes out. If these problems persist, I'll switch it with my desktop, which is slower (P4 2.4 GHz vs. P4 3 GHz HT on my Pundit-R), but at least fully functional. Xiaotian ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
RE: [mythtv-users] Re: New MCE 2005 Remote
Sorry guys, Here is my email to Martin. Cenk Ozkan wrote: > Hi Martin, > > I am trying your mceusb driver for my Media Centre 2005 remote and am > having intermittend failures. My setup is as follows: > > Fedora Core 3 ( 2.6.11-1.14_FC3smp) > Followed Jarod Wilsons guide initially to set everything up including > getting Axel Thimms rpm's for everything. Since then I have manually > compiled Xine followed by IVTV and now LIRC to get my MCE remote going. > > I am using lirc 0.7.0 from source and your > http://blatter.com/mceusb/mceusb.0.22-20050521.tar.bz2 file, I have > also tried http://blatter.com/mceusb/mceusb.0.21-20050401.tar.bz2 both > with same results. Here is what happens: > > All compiles and install's fine , I followed your instructions > religiously. After first installation I reboot and everything works > perfectly. I use irw to capture the keypresses and mythtv runs great > with it. Then I reboot and it stops working. Irw still waits for > keypresses (ie no error) but keypresses no longer show up and mythtv > also doesnt work. If I keep restarting the system (after about 3-4 > times) it all works again ?? What is it doing, I cant see anything in > /var/log/messages, is there a workaround ? > > Please help. > > BTW great work getting this damn remote working. Thanks. > > Regards > Cenk -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mario Limonciello Sent: 31 May 2005 18:07 To: Discussion about mythtv Cc: James Oltman Subject: Re: [mythtv-users] Re: New MCE 2005 Remote haha, cowards way out. Well, I also have an audigy2, with a remote which works too. The only problem with it is that there is a delay from button press to being recognized which I'm pretty sure is a hardware limitation of the receiver. Do you by some chance have access to a machine with Media Center 2005 on it? Apparantly, the drivers are only included in MCE2005, but I would gander if you copy the files over to another XP machine - you could probably force the driver to work on a different machine. If so, I'd love to grab a copy of the drivers used for this remote in windows, to compare USB output and see what I can do to help the developer of this MCE2005 driver to fjix this issue. On 5/31/05, Axel Thimm <[EMAIL PROTECTED]> wrote: > On Tue, May 31, 2005 at 09:32:13AM -0500, James Oltman wrote: > > > I am using FC3 on my FE and was using kernel 2.6.10-1.770 from > > ATRPMS. [...] I was told that a newer kernel should fix the issue. > > I noticed last week that Axel had upgraded the kernel on his site > > [...] > > The announced kernels were 2.4.x only (RHL7.3,8.0,9 and FC1). For FC3 > use the Red Hat supplied kernel. > > > I don't know if lirc has been upgraded with this newer driver or > > not. Axel has told me he only builds "official" releases of > > packages (lirc, nvidia, etc). He doesn't include fixes. > > Was that my wording? :) > > Of course, packages may and should contain fixes, but in this case > this was adding features which may or may not harm other users. If the > code isn't accepted by the lirc developers then the more suspicious it > is (perhaps by now it is, I haven't been tracking this). > -- > Axel.Thimm at ATrpms.net > > > ___ > mythtv-users mailing list > mythtv-users@mythtv.org > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > > ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
RE: [mythtv-users] Re: New MCE 2005 Remote
All, Thanks for all the replies. I am experiencing exactly the same problem, it works sometimes and I am using the blatter.com driver. I have mailed Martin Blatter for some help, here is his response. I tried what he suggested but no joy my end. I hope he doesn't mind being pasted here but I thought it might give someone ideas on how to fix it. -- Hi Cenk I have a similar problem in 1 out of 20 cases with my Shuttle XPC. The only thing that helps is switching off the PC, turning off power completely by unplugging the power and then turning everything on again. The USB device is just not recognized by the hardware or the operating system therefore the driver is not even loaded at all. Try to issue a "lsmod" if it happens again and check if lirc_dev and lirc_mceusb are loaded. Check if the Transciever shows up with "lsusb -v". If it doesn't show up I'm afraid there's nothing that can be done in the driver - newer kernel version *might* fix this but it could also be a hardware issue. If lirc_mceusb shows up in lsmod's output, check /var/log/messages. Try to turn debugging on in /etc/modprobe.conf to get more ouptout. regards Martin = -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mario Limonciello Sent: 31 May 2005 18:07 To: Discussion about mythtv Cc: James Oltman Subject: Re: [mythtv-users] Re: New MCE 2005 Remote haha, cowards way out. Well, I also have an audigy2, with a remote which works too. The only problem with it is that there is a delay from button press to being recognized which I'm pretty sure is a hardware limitation of the receiver. Do you by some chance have access to a machine with Media Center 2005 on it? Apparantly, the drivers are only included in MCE2005, but I would gander if you copy the files over to another XP machine - you could probably force the driver to work on a different machine. If so, I'd love to grab a copy of the drivers used for this remote in windows, to compare USB output and see what I can do to help the developer of this MCE2005 driver to fjix this issue. On 5/31/05, Axel Thimm <[EMAIL PROTECTED]> wrote: > On Tue, May 31, 2005 at 09:32:13AM -0500, James Oltman wrote: > > > I am using FC3 on my FE and was using kernel 2.6.10-1.770 from > > ATRPMS. [...] I was told that a newer kernel should fix the issue. > > I noticed last week that Axel had upgraded the kernel on his site > > [...] > > The announced kernels were 2.4.x only (RHL7.3,8.0,9 and FC1). For FC3 > use the Red Hat supplied kernel. > > > I don't know if lirc has been upgraded with this newer driver or > > not. Axel has told me he only builds "official" releases of > > packages (lirc, nvidia, etc). He doesn't include fixes. > > Was that my wording? :) > > Of course, packages may and should contain fixes, but in this case > this was adding features which may or may not harm other users. If the > code isn't accepted by the lirc developers then the more suspicious it > is (perhaps by now it is, I haven't been tracking this). > -- > Axel.Thimm at ATrpms.net > > > ___ > mythtv-users mailing list > mythtv-users@mythtv.org > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > > ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] Re: New MCE 2005 Remote
haha, cowards way out. Well, I also have an audigy2, with a remote which works too. The only problem with it is that there is a delay from button press to being recognized which I'm pretty sure is a hardware limitation of the receiver. Do you by some chance have access to a machine with Media Center 2005 on it? Apparantly, the drivers are only included in MCE2005, but I would gander if you copy the files over to another XP machine - you could probably force the driver to work on a different machine. If so, I'd love to grab a copy of the drivers used for this remote in windows, to compare USB output and see what I can do to help the developer of this MCE2005 driver to fjix this issue. On 5/31/05, Axel Thimm <[EMAIL PROTECTED]> wrote: > On Tue, May 31, 2005 at 09:32:13AM -0500, James Oltman wrote: > > > I am using FC3 on my FE and was using kernel 2.6.10-1.770 from > > ATRPMS. [...] I was told that a newer kernel should fix the issue. > > I noticed last week that Axel had upgraded the kernel on his site > > [...] > > The announced kernels were 2.4.x only (RHL7.3,8.0,9 and FC1). For FC3 > use the Red Hat supplied kernel. > > > I don't know if lirc has been upgraded with this newer driver or > > not. Axel has told me he only builds "official" releases of > > packages (lirc, nvidia, etc). He doesn't include fixes. > > Was that my wording? :) > > Of course, packages may and should contain fixes, but in this case this > was adding features which may or may not harm other users. If the code > isn't accepted by the lirc developers then the more suspicious it is > (perhaps by now it is, I haven't been tracking this). > -- > Axel.Thimm at ATrpms.net > > > ___ > mythtv-users mailing list > mythtv-users@mythtv.org > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > > ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users