Re: A9K-MPA-20X1GE in ASR9001
I feel should be the hardware issue. On Friday, October 25, 2013, Nikolay Shopik sho...@inblock.ru wrote: Hey, anyone had issues with A9K-MPA-20X1GE in ASR9001? It get disabled for us after 20 seconds finishing initialization, with such message. %PLATFORM-SCC-2-BAD_ID_HW : Failed Identification Test in 0/130/0 [1/0] The module in 0/130/0 in this router may not be a genuineCisco product.
A9K-MPA-20X1GE in ASR9001
Hey, anyone had issues with A9K-MPA-20X1GE in ASR9001? It get disabled for us after 20 seconds finishing initialization, with such message. %PLATFORM-SCC-2-BAD_ID_HW : Failed Identification Test in 0/130/0 [1/0] The module in 0/130/0 in this router may not be a genuineCisco product.
Re: A9K-MPA-20X1GE in ASR9001
I don't have any GBIC/SPF inserted in it right now, it just turn off whole module. So won't allow me even fpd upgrade. On 25/10/13 14:02, Ray Ludendorff wrote: It means that you did not purchase a original Cisco GBIC for the interface .. Therefore it will not be TAC supported if you have problems with the interface. There is a command to override this error and still use the interfaces. Sent from mobile device On Oct 25, 2013, at 11:56, Nikolay Shopik sho...@inblock.ru wrote: Hey, anyone had issues with A9K-MPA-20X1GE in ASR9001? It get disabled for us after 20 seconds finishing initialization, with such message. %PLATFORM-SCC-2-BAD_ID_HW : Failed Identification Test in 0/130/0 [1/0] The module in 0/130/0 in this router may not be a genuineCisco product.
Re: A9K-MPA-20X1GE in ASR9001
On 10/25/2013 11:55 AM, Nikolay Shopik wrote: Hey, anyone had issues with A9K-MPA-20X1GE in ASR9001? Hi Nikolay, We're using them without problems. What software are you running? I did have major issues with flapping onboard 10G ports disabling TX. Regards, Remco Bressers Signet B.V.
Re: A9K-MPA-20X1GE in ASR9001
On 25/10/13 14:08, Remco Bressers wrote: We're using them without problems. What software are you running? I did have major issues with flapping onboard 10G ports disabling TX. Tried on shiped 4.3.1 and now on 4.3.2, with same results. Also IIRC onboard ports only accept SFP+ rigth?
Re: A9K-MPA-20X1GE in ASR9001
We use that combination without difficulty as well. -Bill On Oct 25, 2013, at 17:10, Remco Bressers re...@signet.nl wrote: On 10/25/2013 11:55 AM, Nikolay Shopik wrote: Hey, anyone had issues with A9K-MPA-20X1GE in ASR9001? Hi Nikolay, We're using them without problems. What software are you running? I did have major issues with flapping onboard 10G ports disabling TX. Regards, Remco Bressers Signet B.V.
Re: A9K-MPA-20X1GE in ASR9001
Have you tried a different IOS? Ahad On 25 Oct 2013, at 8:55 pm, Nikolay Shopik sho...@inblock.ru wrote: Hey, anyone had issues with A9K-MPA-20X1GE in ASR9001? It get disabled for us after 20 seconds finishing initialization, with such message. %PLATFORM-SCC-2-BAD_ID_HW : Failed Identification Test in 0/130/0 [1/0] The module in 0/130/0 in this router may not be a genuineCisco product.
Re: A9K-MPA-20X1GE in ASR9001
So far only 4.3.2 and 4.3.1. Probably gonna check it on 4.2 tree and more recent 5.1 On 25/10/13 17:14, Ahad Aboss wrote: Have you tried a different IOS? Ahad On 25 Oct 2013, at 8:55 pm, Nikolay Shopik sho...@inblock.ru wrote: Hey, anyone had issues with A9K-MPA-20X1GE in ASR9001? It get disabled for us after 20 seconds finishing initialization, with such message. %PLATFORM-SCC-2-BAD_ID_HW : Failed Identification Test in 0/130/0 [1/0] The module in 0/130/0 in this router may not be a genuineCisco product.
Re: A9K-MPA-20X1GE in ASR9001
On Oct 25, 2013, at 6:21 AM, Nikolay Shopik sho...@inblock.ru wrote: So far only 4.3.2 and 4.3.1. Probably gonna check it on 4.2 tree We're running 4.2.3. -Bill signature.asc Description: Message signed with OpenPGP using GPGMail
Re: A9K-MPA-20X1GE in ASR9001
On Oct 25, 2013, at 7:23 AM, Bill Woodcock wo...@pch.net wrote: On Oct 25, 2013, at 6:21 AM, Nikolay Shopik sho...@inblock.ru wrote: So far only 4.3.2 and 4.3.1. Probably gonna check it on 4.2 tree We're running 4.2.3. Sorry for the multiple posts… We're also running 4.3.0 with the combination successfully. router.nrt.woodynet.net:!Image: Boot Image: /disk0/asr9k-os-mbi-4.3.0/0x10/mbiasr9k-rp.vm router.nrt.woodynet.net:!Image: Boot Image: /disk0/asr9k-os-mbi-4.3.0/lc/mbiasr9k-lc.vm router.jnb.woodynet.net:!Image: Boot Image: /disk0/asr9k-os-mbi-4.2.3/0x10/mbiasr9k-rp.vm router.jnb.woodynet.net:!Image: Boot Image: /disk0/asr9k-os-mbi-4.2.3/lc/mbiasr9k-lc.vm We have this command on the interfaces as well: transceiver permit pid all …which was necessary to get it to support 1gb SFPs, in addition to the 10gb SFP+ transceivers. -Bill signature.asc Description: Message signed with OpenPGP using GPGMail
A9K-MPA-20X1GE in ASR9001
Hello, Did you tried the service unsupported-transceiver command? Eng. Julian Eble