Favorite GPON Vendor?
Who is your favorite GPON OLT/ONU Vendor? Why? I am looking for recommendations I apologize in advance , if you feel my question is inappropriate for this mailing list ( feel free to point me to right forum/mailing list). Regards, Jay.
RE: Favorite GPON Vendor?
I Personally would like to know as well. We are just getting into GPON and the equipment we have been evaluating is clunky at best... It came highly recommended and supposed to be stable. Eric Rogers PDS Connect www.pdsconnect.me (317) 831-3000 x200 -Original Message- From: NANOG [mailto:nanog-boun...@nanog.org] On Behalf Of Jay Patel Sent: Monday, November 9, 2015 9:50 AM To: nanog@nanog.org Subject: Favorite GPON Vendor? Who is your favorite GPON OLT/ONU Vendor? Why? I am looking for recommendations I apologize in advance , if you feel my question is inappropriate for this mailing list ( feel free to point me to right forum/mailing list). Regards, Jay.
Re: Favorite GPON Vendor?
We use the Adtran ONT solutions. We are using AE (Active Ethernet) not GPON but the solutions are similar for Adtran. We are providing IP and Analog this way. If used in the specified scope only there have been very little problems. Adtran is constantly updating their firmware, this can be a positive and negative at times. LoL The configuration is Adtran TA5000 with an Active Ethernet 24-Port Module (1187562F1) feeding an ONT TA324E (1287737G2) at the customer premise. For power we are using the Cyber Power CSN27U12v-NA3 units. The clam shell we are using to put the ONT in is TA350 ONT NID HSG SPLICE (1187770G1) All of these part numbers should be available on Adtrans website to look up. We are also testing some iPhotonix ONTs but have not gotten to the point we are sure we want to deploy them. Brian PS I will post this in voiceops as well (it may be more relevant there) From: NANOG on behalf of Eric Rogers Sent: Monday, November 9, 2015 10:09 AM To: Jay Patel; nanog@nanog.org Subject: RE: Favorite GPON Vendor? I Personally would like to know as well. We are just getting into GPON and the equipment we have been evaluating is clunky at best... It came highly recommended and supposed to be stable. Eric Rogers PDS Connect www.pdsconnect.me (317) 831-3000 x200 -Original Message- From: NANOG [mailto:nanog-boun...@nanog.org] On Behalf Of Jay Patel Sent: Monday, November 9, 2015 9:50 AM To: nanog@nanog.org Subject: Favorite GPON Vendor? Who is your favorite GPON OLT/ONU Vendor? Why? I am looking for recommendations I apologize in advance , if you feel my question is inappropriate for this mailing list ( feel free to point me to right forum/mailing list). Regards, Jay.
Re: Favorite GPON Vendor?
Brian, How complex is the troubleshooting side of the Adtran? We Use the Enablence Wave7 and getting any useful information from the CPE via the CLI is like pulling hens teeth. I have yet to see a way to view the actual throughput on the ethernet interfaces, only total bits passed, or the light levels at the CPE fiber interface. A bit annoying actually. It means a truck roll to get light levels at the CPE. Art. - Original Message - From: "Brian R" To: "Eric Rogers" , "Jay Patel" Cc: nanog@nanog.org Sent: Monday, November 9, 2015 2:25:44 PM Subject: Re: Favorite GPON Vendor? We use the Adtran ONT solutions. We are using AE (Active Ethernet) not GPON but the solutions are similar for Adtran. We are providing IP and Analog this way. If used in the specified scope only there have been very little problems. Adtran is constantly updating their firmware, this can be a positive and negative at times. LoL The configuration is Adtran TA5000 with an Active Ethernet 24-Port Module (1187562F1) feeding an ONT TA324E (1287737G2) at the customer premise. For power we are using the Cyber Power CSN27U12v-NA3 units. The clam shell we are using to put the ONT in is TA350 ONT NID HSG SPLICE (1187770G1) All of these part numbers should be available on Adtrans website to look up. We are also testing some iPhotonix ONTs but have not gotten to the point we are sure we want to deploy them. Brian PS I will post this in voiceops as well (it may be more relevant there) From: NANOG on behalf of Eric Rogers Sent: Monday, November 9, 2015 10:09 AM To: Jay Patel; nanog@nanog.org Subject: RE: Favorite GPON Vendor? I Personally would like to know as well. We are just getting into GPON and the equipment we have been evaluating is clunky at best... It came highly recommended and supposed to be stable. Eric Rogers PDS Connect www.pdsconnect.me (317) 831-3000 x200 -Original Message- From: NANOG [mailto:nanog-boun...@nanog.org] On Behalf Of Jay Patel Sent: Monday, November 9, 2015 9:50 AM To: nanog@nanog.org Subject: Favorite GPON Vendor? Who is your favorite GPON OLT/ONU Vendor? Why? I am looking for recommendations I apologize in advance , if you feel my question is inappropriate for this mailing list ( feel free to point me to right forum/mailing list). Regards, Jay.
Re: Favorite GPON Vendor?
We like Calix's gpon gear, especially the E7 series. Though it's on the higher side price-wise than others. Manageable through their CMS software, the web, or command line. We tend to use their CMS software for most things, but the CLI is decent, and gives you access to anything you'd want. -Original Message- From: "Art Plato" Sent: Monday, November 9, 2015 2:38pm To: Cc: nanog@nanog.org Subject: Re: Favorite GPON Vendor? Brian, How complex is the troubleshooting side of the Adtran? We Use the Enablence Wave7 and getting any useful information from the CPE via the CLI is like pulling hens teeth. I have yet to see a way to view the actual throughput on the ethernet interfaces, only total bits passed, or the light levels at the CPE fiber interface. A bit annoying actually. It means a truck roll to get light levels at the CPE. Art. - Original Message - From: "Brian R" To: "Eric Rogers" , "Jay Patel" Cc: nanog@nanog.org Sent: Monday, November 9, 2015 2:25:44 PM Subject: Re: Favorite GPON Vendor? We use the Adtran ONT solutions. We are using AE (Active Ethernet) not GPON but the solutions are similar for Adtran. We are providing IP and Analog this way. If used in the specified scope only there have been very little problems. Adtran is constantly updating their firmware, this can be a positive and negative at times. LoL The configuration is Adtran TA5000 with an Active Ethernet 24-Port Module (1187562F1) feeding an ONT TA324E (1287737G2) at the customer premise. For power we are using the Cyber Power CSN27U12v-NA3 units. The clam shell we are using to put the ONT in is TA350 ONT NID HSG SPLICE (1187770G1) All of these part numbers should be available on Adtrans website to look up. We are also testing some iPhotonix ONTs but have not gotten to the point we are sure we want to deploy them. Brian PS I will post this in voiceops as well (it may be more relevant there) From: NANOG on behalf of Eric Rogers Sent: Monday, November 9, 2015 10:09 AM To: Jay Patel; nanog@nanog.org Subject: RE: Favorite GPON Vendor? I Personally would like to know as well. We are just getting into GPON and the equipment we have been evaluating is clunky at best... It came highly recommended and supposed to be stable. Eric Rogers PDS Connect www.pdsconnect.me (317) 831-3000 x200 -Original Message- From: NANOG [mailto:nanog-boun...@nanog.org] On Behalf Of Jay Patel Sent: Monday, November 9, 2015 9:50 AM To: nanog@nanog.org Subject: Favorite GPON Vendor? Who is your favorite GPON OLT/ONU Vendor? Why? I am looking for recommendations I apologize in advance , if you feel my question is inappropriate for this mailing list ( feel free to point me to right forum/mailing list). Regards, Jay.
Re: Favorite GPON Vendor?
Awesome. Thanks for the feedback Brian. Price is important, but not the be all of the consideration process. Troubleshooting ease matters just as much. - Original Message - From: "Shawn L" To: "nanog" Sent: Tuesday, November 10, 2015 8:27:46 AM Subject: Re: Favorite GPON Vendor? We like Calix's gpon gear, especially the E7 series. Though it's on the higher side price-wise than others. Manageable through their CMS software, the web, or command line. We tend to use their CMS software for most things, but the CLI is decent, and gives you access to anything you'd want. -Original Message- From: "Art Plato" Sent: Monday, November 9, 2015 2:38pm To: Cc: nanog@nanog.org Subject: Re: Favorite GPON Vendor? Brian, How complex is the troubleshooting side of the Adtran? We Use the Enablence Wave7 and getting any useful information from the CPE via the CLI is like pulling hens teeth. I have yet to see a way to view the actual throughput on the ethernet interfaces, only total bits passed, or the light levels at the CPE fiber interface. A bit annoying actually. It means a truck roll to get light levels at the CPE. Art. - Original Message - From: "Brian R" To: "Eric Rogers" , "Jay Patel" Cc: nanog@nanog.org Sent: Monday, November 9, 2015 2:25:44 PM Subject: Re: Favorite GPON Vendor? We use the Adtran ONT solutions. We are using AE (Active Ethernet) not GPON but the solutions are similar for Adtran. We are providing IP and Analog this way. If used in the specified scope only there have been very little problems. Adtran is constantly updating their firmware, this can be a positive and negative at times. LoL The configuration is Adtran TA5000 with an Active Ethernet 24-Port Module (1187562F1) feeding an ONT TA324E (1287737G2) at the customer premise. For power we are using the Cyber Power CSN27U12v-NA3 units. The clam shell we are using to put the ONT in is TA350 ONT NID HSG SPLICE (1187770G1) All of these part numbers should be available on Adtrans website to look up. We are also testing some iPhotonix ONTs but have not gotten to the point we are sure we want to deploy them. Brian PS I will post this in voiceops as well (it may be more relevant there) From: NANOG on behalf of Eric Rogers Sent: Monday, November 9, 2015 10:09 AM To: Jay Patel; nanog@nanog.org Subject: RE: Favorite GPON Vendor? I Personally would like to know as well. We are just getting into GPON and the equipment we have been evaluating is clunky at best... It came highly recommended and supposed to be stable. Eric Rogers PDS Connect www.pdsconnect.me (317) 831-3000 x200 -Original Message- From: NANOG [mailto:nanog-boun...@nanog.org] On Behalf Of Jay Patel Sent: Monday, November 9, 2015 9:50 AM To: nanog@nanog.org Subject: Favorite GPON Vendor? Who is your favorite GPON OLT/ONU Vendor? Why? I am looking for recommendations I apologize in advance , if you feel my question is inappropriate for this mailing list ( feel free to point me to right forum/mailing list). Regards, Jay.
Re: Favorite GPON Vendor?
Hello Jay, Le 09/11/2015 15:49, Jay Patel a écrit : > Who is your favorite GPON OLT/ONU Vendor? Why? I am looking for > recommendations I've had great operationnal feedback with Alcatel's gear. Not the old 7302 series, rather the 7360s which support up to 16 ports/slot. The best part is their provisionning system, because it's a "service template" driven logic. It scales well, as long as you don't try to produce L3 services right on the OLT chassis (better trunk to a 7750 SR or any other L3 router). The 7360FX line also has a P2P linecard, which is usefull when you want to serve both residential and business accesses from the same device. Higlights : - Up to 32k GPON subscribers per chassis - Up to 1152 gigabit ports per chassis in PtP setup (ideal for B2B) - Unlimited customers from the same mamangement server (5620SAM, optionnal but worth it past 5+ chassis) On the financial aspects, well, it's surprisingly cheap as soon as you have to scale past the chinese pizabox OLTs. Over 9 trees out of a single PoP, you're definitely more effective with such devices. Best regards, -- Jérôme Nicolle +33 6 19 31 27 14
Re: Favorite GPON Vendor?
Art, I can't say we have a lot of experience with the Adtran GPON units. On the Active Ethernet side if we assign an IP to the ONT we can view all the stats going back to the TA5K. From the TA5K we can also view the individual Ethernet ports. I will send you directly some examples. I don't think NANOG wants to see a bunch of Adtran "show ..." commands : ] As far as Shawns Calix experiences the last time we tried Calix GPON was 5-6 years ago. The CPE seemed solid but the POP side was in constant need of rebooting and we gave it up after about 8-12 months of customer frustrations. At that time we did not get much help on the problems. Brian From: NANOG on behalf of Art Plato Sent: Tuesday, November 10, 2015 5:32 AM To: Shawn L Cc: nanog Subject: Re: Favorite GPON Vendor? Awesome. Thanks for the feedback Brian. Price is important, but not the be all of the consideration process. Troubleshooting ease matters just as much. - Original Message - From: "Shawn L" To: "nanog" Sent: Tuesday, November 10, 2015 8:27:46 AM Subject: Re: Favorite GPON Vendor? We like Calix's gpon gear, especially the E7 series. Though it's on the higher side price-wise than others. Manageable through their CMS software, the web, or command line. We tend to use their CMS software for most things, but the CLI is decent, and gives you access to anything you'd want. -Original Message- From: "Art Plato" Sent: Monday, November 9, 2015 2:38pm To: Cc: nanog@nanog.org Subject: Re: Favorite GPON Vendor? Brian, How complex is the troubleshooting side of the Adtran? We Use the Enablence Wave7 and getting any useful information from the CPE via the CLI is like pulling hens teeth. I have yet to see a way to view the actual throughput on the ethernet interfaces, only total bits passed, or the light levels at the CPE fiber interface. A bit annoying actually. It means a truck roll to get light levels at the CPE. Art. - Original Message - From: "Brian R" To: "Eric Rogers" , "Jay Patel" Cc: nanog@nanog.org Sent: Monday, November 9, 2015 2:25:44 PM Subject: Re: Favorite GPON Vendor? We use the Adtran ONT solutions. We are using AE (Active Ethernet) not GPON but the solutions are similar for Adtran. We are providing IP and Analog this way. If used in the specified scope only there have been very little problems. Adtran is constantly updating their firmware, this can be a positive and negative at times. LoL The configuration is Adtran TA5000 with an Active Ethernet 24-Port Module (1187562F1) feeding an ONT TA324E (1287737G2) at the customer premise. For power we are using the Cyber Power CSN27U12v-NA3 units. The clam shell we are using to put the ONT in is TA350 ONT NID HSG SPLICE (1187770G1) All of these part numbers should be available on Adtrans website to look up. We are also testing some iPhotonix ONTs but have not gotten to the point we are sure we want to deploy them. Brian PS I will post this in voiceops as well (it may be more relevant there) From: NANOG on behalf of Eric Rogers Sent: Monday, November 9, 2015 10:09 AM To: Jay Patel; nanog@nanog.org Subject: RE: Favorite GPON Vendor? I Personally would like to know as well. We are just getting into GPON and the equipment we have been evaluating is clunky at best... It came highly recommended and supposed to be stable. Eric Rogers PDS Connect www.pdsconnect.me (317) 831-3000 x200 -Original Message- From: NANOG [mailto:nanog-boun...@nanog.org] On Behalf Of Jay Patel Sent: Monday, November 9, 2015 9:50 AM To: nanog@nanog.org Subject: Favorite GPON Vendor? Who is your favorite GPON OLT/ONU Vendor? Why? I am looking for recommendations I apologize in advance , if you feel my question is inappropriate for this mailing list ( feel free to point me to right forum/mailing list). Regards, Jay.
Re: Favorite GPON Vendor?
Previously I had stated we tested Calix equipment. That was wrong, we had deployed Tellabs GPON equipment. That was what we had had problems with and had not received much support on. Apologies for the error. I believe the reason we chose not to go with Calix was the requirement to have a constant connection between the configuration server/hardware and the ONTs. If there was a problem with the configuration server or if the ONT reloaded and was not able to reach the configuration server the ONT would not configure. We like the fact that the Adtrans were configured directly off their uplink hardware and that they were capable of storing the configuration on the ONT. We did not have any problems with Calix support that I can recall. Brian From: NANOG on behalf of Brian R Sent: Tuesday, November 10, 2015 11:32 AM To: Art Plato Cc: nanog Subject: Re: Favorite GPON Vendor? Art, I can't say we have a lot of experience with the Adtran GPON units. On the Active Ethernet side if we assign an IP to the ONT we can view all the stats going back to the TA5K. From the TA5K we can also view the individual Ethernet ports. I will send you directly some examples. I don't think NANOG wants to see a bunch of Adtran "show ..." commands : ] As far as Shawns Calix experiences the last time we tried Calix GPON was 5-6 years ago. The CPE seemed solid but the POP side was in constant need of rebooting and we gave it up after about 8-12 months of customer frustrations. At that time we did not get much help on the problems. Brian From: NANOG on behalf of Art Plato Sent: Tuesday, November 10, 2015 5:32 AM To: Shawn L Cc: nanog Subject: Re: Favorite GPON Vendor? Awesome. Thanks for the feedback Brian. Price is important, but not the be all of the consideration process. Troubleshooting ease matters just as much. - Original Message - From: "Shawn L" To: "nanog" Sent: Tuesday, November 10, 2015 8:27:46 AM Subject: Re: Favorite GPON Vendor? We like Calix's gpon gear, especially the E7 series. Though it's on the higher side price-wise than others. Manageable through their CMS software, the web, or command line. We tend to use their CMS software for most things, but the CLI is decent, and gives you access to anything you'd want. -Original Message- From: "Art Plato" Sent: Monday, November 9, 2015 2:38pm To: Cc: nanog@nanog.org Subject: Re: Favorite GPON Vendor? Brian, How complex is the troubleshooting side of the Adtran? We Use the Enablence Wave7 and getting any useful information from the CPE via the CLI is like pulling hens teeth. I have yet to see a way to view the actual throughput on the ethernet interfaces, only total bits passed, or the light levels at the CPE fiber interface. A bit annoying actually. It means a truck roll to get light levels at the CPE. Art. - Original Message - From: "Brian R" To: "Eric Rogers" , "Jay Patel" Cc: nanog@nanog.org Sent: Monday, November 9, 2015 2:25:44 PM Subject: Re: Favorite GPON Vendor? We use the Adtran ONT solutions. We are using AE (Active Ethernet) not GPON but the solutions are similar for Adtran. We are providing IP and Analog this way. If used in the specified scope only there have been very little problems. Adtran is constantly updating their firmware, this can be a positive and negative at times. LoL The configuration is Adtran TA5000 with an Active Ethernet 24-Port Module (1187562F1) feeding an ONT TA324E (1287737G2) at the customer premise. For power we are using the Cyber Power CSN27U12v-NA3 units. The clam shell we are using to put the ONT in is TA350 ONT NID HSG SPLICE (1187770G1) All of these part numbers should be available on Adtrans website to look up. We are also testing some iPhotonix ONTs but have not gotten to the point we are sure we want to deploy them. Brian PS I will post this in voiceops as well (it may be more relevant there) From: NANOG on behalf of Eric Rogers Sent: Monday, November 9, 2015 10:09 AM To: Jay Patel; nanog@nanog.org Subject: RE: Favorite GPON Vendor? I Personally would like to know as well. We are just getting into GPON and the equipment we have been evaluating is clunky at best... It came highly recommended and supposed to be stable. Eric Rogers PDS Connect www.pdsconnect.me (317) 831-3000 x200 -Original Message- From: NANOG [mailto:nanog-boun...@nanog.org] On Behalf Of Jay Patel Sent: Monday, November 9, 2015 9:50 AM To: nanog@nanog.org Subject: Favorite GPON Vendor? Who is your favorite GPON OLT/ONU Vendor? Why? I am looking for recommendations I apologize in advance , if you feel my question is inappropriate for this mailing list ( feel free to point me to right forum/mailing list). Regards, Jay.
RES: Favorite GPON Vendor?
We're evaluating the ZTE OLT/ONT and the results are being good so far. The OMCI has the basic commands to apply a PPPoE conection and a SIP phone, after the TR069 do the job. Julian -Mensagem original- De: NANOG [mailto:nanog-boun...@nanog.org] Em nome de Brian R Enviada em: quarta-feira, 11 de novembro de 2015 17:58 Para: nanog Assunto: Re: Favorite GPON Vendor? Previously I had stated we tested Calix equipment. That was wrong, we had deployed Tellabs GPON equipment. That was what we had had problems with and had not received much support on. Apologies for the error. I believe the reason we chose not to go with Calix was the requirement to have a constant connection between the configuration server/hardware and the ONTs. If there was a problem with the configuration server or if the ONT reloaded and was not able to reach the configuration server the ONT would not configure. We like the fact that the Adtrans were configured directly off their uplink hardware and that they were capable of storing the configuration on the ONT. We did not have any problems with Calix support that I can recall. Brian From: NANOG on behalf of Brian R Sent: Tuesday, November 10, 2015 11:32 AM To: Art Plato Cc: nanog Subject: Re: Favorite GPON Vendor? Art, I can't say we have a lot of experience with the Adtran GPON units. On the Active Ethernet side if we assign an IP to the ONT we can view all the stats going back to the TA5K. From the TA5K we can also view the individual Ethernet ports. I will send you directly some examples. I don't think NANOG wants to see a bunch of Adtran "show ..." commands : ] As far as Shawns Calix experiences the last time we tried Calix GPON was 5-6 years ago. The CPE seemed solid but the POP side was in constant need of rebooting and we gave it up after about 8-12 months of customer frustrations. At that time we did not get much help on the problems. Brian From: NANOG on behalf of Art Plato Sent: Tuesday, November 10, 2015 5:32 AM To: Shawn L Cc: nanog Subject: Re: Favorite GPON Vendor? Awesome. Thanks for the feedback Brian. Price is important, but not the be all of the consideration process. Troubleshooting ease matters just as much. - Original Message - From: "Shawn L" To: "nanog" Sent: Tuesday, November 10, 2015 8:27:46 AM Subject: Re: Favorite GPON Vendor? We like Calix's gpon gear, especially the E7 series. Though it's on the higher side price-wise than others. Manageable through their CMS software, the web, or command line. We tend to use their CMS software for most things, but the CLI is decent, and gives you access to anything you'd want. -Original Message- From: "Art Plato" Sent: Monday, November 9, 2015 2:38pm To: Cc: nanog@nanog.org Subject: Re: Favorite GPON Vendor? Brian, How complex is the troubleshooting side of the Adtran? We Use the Enablence Wave7 and getting any useful information from the CPE via the CLI is like pulling hens teeth. I have yet to see a way to view the actual throughput on the ethernet interfaces, only total bits passed, or the light levels at the CPE fiber interface. A bit annoying actually. It means a truck roll to get light levels at the CPE. Art. - Original Message - From: "Brian R" To: "Eric Rogers" , "Jay Patel" Cc: nanog@nanog.org Sent: Monday, November 9, 2015 2:25:44 PM Subject: Re: Favorite GPON Vendor? We use the Adtran ONT solutions. We are using AE (Active Ethernet) not GPON but the solutions are similar for Adtran. We are providing IP and Analog this way. If used in the specified scope only there have been very little problems. Adtran is constantly updating their firmware, this can be a positive and negative at times. LoL The configuration is Adtran TA5000 with an Active Ethernet 24-Port Module (1187562F1) feeding an ONT TA324E (1287737G2) at the customer premise. For power we are using the Cyber Power CSN27U12v-NA3 units. The clam shell we are using to put the ONT in is TA350 ONT NID HSG SPLICE (1187770G1) All of these part numbers should be available on Adtrans website to look up. We are also testing some iPhotonix ONTs but have not gotten to the point we are sure we want to deploy them. Brian PS I will post this in voiceops as well (it may be more relevant there) From: NANOG on behalf of Eric Rogers Sent: Monday, November 9, 2015 10:09 AM To: Jay Patel; nanog@nanog.org Subject: RE: Favorite GPON Vendor? I Personally would like to know as well. We are just getting into GPON and the equipment we have been evaluating is clunky at best... It came highly recommended and supposed to be stable. Eric Rogers PDS Connect www.pdsconnect.me (317) 831-3000 x200 -Original Message- From: NANOG [mailto:nanog-boun...@nanog.org] On Behalf Of Jay Pat
Re: Favorite GPON Vendor?
That is the case with Calix Active Ethernet ONT's, but not with GPON. AE ONT's need a tftp server on boot to get a configuration. On Nov 11, 2015 2:00 PM, "Brian R" wrote: > Previously I had stated we tested Calix equipment. That was wrong, we had > deployed Tellabs GPON equipment. That was what we had had problems with > and had not received much support on. > Apologies for the error. > > I believe the reason we chose not to go with Calix was the requirement to > have a constant connection between the configuration server/hardware and > the ONTs. If there was a problem with the configuration server or if the > ONT reloaded and was not able to reach the configuration server the ONT > would not configure. We like the fact that the Adtrans were configured > directly off their uplink hardware and that they were capable of storing > the configuration on the ONT. > We did not have any problems with Calix support that I can recall. > > Brian > > From: NANOG on behalf of Brian R < > briansupp...@hotmail.com> > Sent: Tuesday, November 10, 2015 11:32 AM > To: Art Plato > Cc: nanog > Subject: Re: Favorite GPON Vendor? > > Art, > > I can't say we have a lot of experience with the Adtran GPON units. On > the Active Ethernet side if we assign an IP to the ONT we can view all the > stats going back to the TA5K. From the TA5K we can also view the > individual Ethernet ports. I will send you directly some examples. I > don't think NANOG wants to see a bunch of Adtran "show ..." commands : ] > > As far as Shawns Calix experiences the last time we tried Calix GPON was > 5-6 years ago. The CPE seemed solid but the POP side was in constant need > of rebooting and we gave it up after about 8-12 months of customer > frustrations. At that time we did not get much help on the problems. > > Brian > > ____ > From: NANOG on behalf of Art Plato < > apl...@coldwater.org> > Sent: Tuesday, November 10, 2015 5:32 AM > To: Shawn L > Cc: nanog > Subject: Re: Favorite GPON Vendor? > > Awesome. Thanks for the feedback Brian. Price is important, but not the be > all of the consideration process. Troubleshooting ease matters just as much. > > - Original Message - > From: "Shawn L" > To: "nanog" > Sent: Tuesday, November 10, 2015 8:27:46 AM > Subject: Re: Favorite GPON Vendor? > > > We like Calix's gpon gear, especially the E7 series. Though it's on the > higher side price-wise than others. Manageable through their CMS software, > the web, or command line. We tend to use their CMS software for most > things, but the CLI is decent, and gives you access to anything you'd want. > > > -Original Message- > From: "Art Plato" > Sent: Monday, November 9, 2015 2:38pm > To: > Cc: nanog@nanog.org > Subject: Re: Favorite GPON Vendor? > > > > Brian, > How complex is the troubleshooting side of the Adtran? We Use the > Enablence Wave7 and getting any useful information from the CPE via the CLI > is like pulling hens teeth. I have yet to see a way to view the actual > throughput on the ethernet interfaces, only total bits passed, or the light > levels at the CPE fiber interface. A bit annoying actually. It means a > truck roll to get light levels at the CPE. > > Art. > > - Original Message - > From: "Brian R" > To: "Eric Rogers" , "Jay Patel" < > cle...@gmail.com> > Cc: nanog@nanog.org > Sent: Monday, November 9, 2015 2:25:44 PM > Subject: Re: Favorite GPON Vendor? > > We use the Adtran ONT solutions. We are using AE (Active Ethernet) not > GPON but the solutions are similar for Adtran. We are providing IP and > Analog this way. If used in the specified scope only there have been very > little problems. Adtran is constantly updating their firmware, this can be > a positive and negative at times. LoL > > The configuration is Adtran TA5000 with an Active Ethernet 24-Port Module > (1187562F1) feeding an ONT TA324E (1287737G2) at the customer premise. > For power we are using the Cyber Power CSN27U12v-NA3 units. > The clam shell we are using to put the ONT in is TA350 ONT NID HSG SPLICE > (1187770G1) > All of these part numbers should be available on Adtrans website to look > up. > > We are also testing some iPhotonix ONTs but have not gotten to the point > we are sure we want to deploy them. > > Brian > > PS I will post this in voiceops as well (it may be more relevant there) > > > From: NANOG on behalf of Eric Rogers < > ecrog...@
Re: Favorite GPON Vendor?
We are about do deploy Calix, but after hearing about $company deploying Adtran and liking their chassis features and NG-PON2 upgrade path, we are now open to other vendors. Price IS a concern for us, but not THE concern. This may sound "wacky" to some, but if anybody on here is using Huawei GPON gear, could you contact me off list? Thanks (josh AT kyneticwifi.com) On Mon, Nov 9, 2015 at 8:49 AM, Jay Patel wrote: > Who is your favorite GPON OLT/ONU Vendor? Why? I am looking for > recommendations > > I apologize in advance , if you feel my question is inappropriate for this > mailing list ( feel free to point me to right forum/mailing list). > > Regards, > Jay.
Re: Favorite GPON Vendor?
On 12/Nov/15 04:48, Josh Reynolds wrote: > > This may sound "wacky" to some, but if anybody on here is using Huawei > GPON gear, could you contact me off list? I used Huawei GPON gear at previous job. I won't lie, it worked great. A few bugs with the IGMP implementation, but nothing a plane full of Huawei engineers from China with a local translator couldn't fix. That network probably still uses Huawei today. I'm more into Active-E myself, these days. Mark.
Re: Favorite GPON Vendor?
Did you guys use them for core and distribution switching/routing as well, or just on the GPON access side? On Wed, Nov 11, 2015 at 11:41 PM, Mark Tinka wrote: > > > On 12/Nov/15 04:48, Josh Reynolds wrote: > >> >> This may sound "wacky" to some, but if anybody on here is using Huawei >> GPON gear, could you contact me off list? > > I used Huawei GPON gear at previous job. > > I won't lie, it worked great. A few bugs with the IGMP implementation, > but nothing a plane full of Huawei engineers from China with a local > translator couldn't fix. > > That network probably still uses Huawei today. I'm more into Active-E > myself, these days. > > Mark.
Re: Favorite GPON Vendor?
On 12/Nov/15 20:42, Josh Reynolds wrote: > Did you guys use them for core and distribution switching/routing as > well, or just on the GPON access side? Just GPON. All IP/MPLS/Ethernet kit was Cisco and Juniper. Mark.
Re: Favorite GPON Vendor?
hey, I used Huawei GPON gear at previous job. +1 for the MA5600 series. They are decent boxes compared to most of the other vendors that tend to be hardcore telco with (undocumented) TL1 management plane. -- tarko
RE: Favorite GPON Vendor?
What does ADTRAN's NG-PON2 upgrade path have over Calix's? Frank -Original Message- From: NANOG [mailto:nanog-boun...@nanog.org] On Behalf Of Josh Reynolds Sent: Wednesday, November 11, 2015 8:49 PM To: NANOG Subject: Re: Favorite GPON Vendor? We are about do deploy Calix, but after hearing about $company deploying Adtran and liking their chassis features and NG-PON2 upgrade path, we are now open to other vendors. Price IS a concern for us, but not THE concern. This may sound "wacky" to some, but if anybody on here is using Huawei GPON gear, could you contact me off list? Thanks (josh AT kyneticwifi.com) On Mon, Nov 9, 2015 at 8:49 AM, Jay Patel wrote: > Who is your favorite GPON OLT/ONU Vendor? Why? I am looking for > recommendations > > I apologize in advance , if you feel my question is inappropriate for this > mailing list ( feel free to point me to right forum/mailing list). > > Regards, > Jay.
RE: Favorite GPON Vendor?
Frank, Take a look at this webinar. https://www.webcaster4.com/Webcast/Page?companyId=116&webcastId=10264 On Nov 12, 2015 7:03 PM, "Frank Bulk" wrote: > What does ADTRAN's NG-PON2 upgrade path have over Calix's? > > Frank > > -Original Message- > From: NANOG [mailto:nanog-boun...@nanog.org] On Behalf Of Josh Reynolds > Sent: Wednesday, November 11, 2015 8:49 PM > To: NANOG > Subject: Re: Favorite GPON Vendor? > > We are about do deploy Calix, but after hearing about $company > deploying Adtran and liking their chassis features and NG-PON2 upgrade > path, we are now open to other vendors. Price IS a concern for us, but > not THE concern. > > This may sound "wacky" to some, but if anybody on here is using Huawei > GPON gear, could you contact me off list? Thanks > (josh AT kyneticwifi.com) > > On Mon, Nov 9, 2015 at 8:49 AM, Jay Patel wrote: > > Who is your favorite GPON OLT/ONU Vendor? Why? I am looking for > > recommendations > > > > I apologize in advance , if you feel my question is inappropriate for > this > > mailing list ( feel free to point me to right forum/mailing list). > > > > Regards, > > Jay. > > >
Re: Favorite GPON Vendor?
I believe with any of these arms dealers (gpon vendors) they all have there goods and bads, it really comes down to what poison you feel you can deal with. The one place I can speak on with calix is there consumer connect with there 800 series ont's has pushed it to a totally different level, it's not perfect but it's getting there. Carlos Alcantar Race Communications / Race Team Member 1325 Howard Ave. #604, Burlingame, CA. 94010 Phone: +1 415 376 3314 / car...@race.com / http://www.race.com From: NANOG on behalf of Scott Helms Sent: Thursday, November 12, 2015 4:24 PM To: Frank Bulk (iname.com) Cc: NANOG Subject: RE: Favorite GPON Vendor? Frank, Take a look at this webinar. https://www.webcaster4.com/Webcast/Page?companyId=116&webcastId=10264 On Nov 12, 2015 7:03 PM, "Frank Bulk" wrote: > What does ADTRAN's NG-PON2 upgrade path have over Calix's? > > Frank > > -Original Message- > From: NANOG [mailto:nanog-boun...@nanog.org] On Behalf Of Josh Reynolds > Sent: Wednesday, November 11, 2015 8:49 PM > To: NANOG > Subject: Re: Favorite GPON Vendor? > > We are about do deploy Calix, but after hearing about $company > deploying Adtran and liking their chassis features and NG-PON2 upgrade > path, we are now open to other vendors. Price IS a concern for us, but > not THE concern. > > This may sound "wacky" to some, but if anybody on here is using Huawei > GPON gear, could you contact me off list? Thanks > (josh AT kyneticwifi.com) > > On Mon, Nov 9, 2015 at 8:49 AM, Jay Patel wrote: > > Who is your favorite GPON OLT/ONU Vendor? Why? I am looking for > > recommendations > > > > I apologize in advance , if you feel my question is inappropriate for > this > > mailing list ( feel free to point me to right forum/mailing list). > > > > Regards, > > Jay. > > >
RE: Favorite GPON Vendor?
Too bad they require registration, don't need yet another sales person calling me. The abstract reads more or less like what Calix is promoting with their product development. On Nov 12, 2015 6:25 PM, "Scott Helms" wrote: > Frank, > > Take a look at this webinar. > > https://www.webcaster4.com/Webcast/Page?companyId=116&webcastId=10264 > On Nov 12, 2015 7:03 PM, "Frank Bulk" wrote: > > > What does ADTRAN's NG-PON2 upgrade path have over Calix's? > > > > Frank > > > > -Original Message- > > From: NANOG [mailto:nanog-boun...@nanog.org] On Behalf Of Josh Reynolds > > Sent: Wednesday, November 11, 2015 8:49 PM > > To: NANOG > > Subject: Re: Favorite GPON Vendor? > > > > We are about do deploy Calix, but after hearing about $company > > deploying Adtran and liking their chassis features and NG-PON2 upgrade > > path, we are now open to other vendors. Price IS a concern for us, but > > not THE concern. > > > > This may sound "wacky" to some, but if anybody on here is using Huawei > > GPON gear, could you contact me off list? Thanks > > (josh AT kyneticwifi.com) > > > > On Mon, Nov 9, 2015 at 8:49 AM, Jay Patel wrote: > > > Who is your favorite GPON OLT/ONU Vendor? Why? I am looking for > > > recommendations > > > > > > I apologize in advance , if you feel my question is inappropriate for > > this > > > mailing list ( feel free to point me to right forum/mailing list). > > > > > > Regards, > > > Jay. > > > > > > >
Re: Favorite GPON Vendor?
On Fri, 13 Nov 2015 at 08:43 Tarko Tikan wrote: > hey, > > > I used Huawei GPON gear at previous job. > > +1 for the MA5600 series. > +1 for MA5600. Very stable and inter-op is also possible. -- Best Wishes, Aftab A. Siddiqui
Re: Favorite GPON Vendor?
To me the best solution in GPON is http://www.parks.com.br/ from Brazil. Good support and innovation.
Re: Favorite GPON Vendor?
I thought I would see something about fiberhome here Em sex, 13 de nov de 2015 00:04, Aftab Siddiqui escreveu: > On Fri, 13 Nov 2015 at 08:43 Tarko Tikan wrote: > > > hey, > > > > > I used Huawei GPON gear at previous job. > > > > +1 for the MA5600 series. > > > > +1 for MA5600. Very stable and inter-op is also possible. > -- > Best Wishes, > > Aftab A. Siddiqui >
RE: Favorite GPON Vendor?
> Too bad they require registration Direct download link: http://www.webcaster4.com/Player/Material?uid=2305846&materialGuid=5f4478fb-d75f-4ef6-93f3-e25b67862c7a Or login with d...@sharklasers.com. Jared