I will definitely post the results when I make the change. I am going to
wait until the warranty return period is over before I make any changes. I
put a short 30 second video of the clock in operation at
https://www.youtube.com/watch?v=FC2LtsPWbPc. The tubes are the ZM1022's.
This morning I decided to finally find out what the 16 Nixie tubes are in
that 16-digit display I have had for at least 35 years. I never took it
apart to look tube type. They are Rodan GR-111P's. Nice silvery printing
on the back. I have to examine the pinout on the spec sheet and see what
would be involved in using them with one of the Chinese boards. If the pins
are close to IN-14 layout they should be easy enough to install on one of
those common boards without having to move wires all over the place.
On Wednesday, October 9, 2019 at 4:24:33 PM UTC-4, Tyler Bourne wrote:
>
> I've used an INS1 as a colon in one of my clocks. They tend to flicker
> sometimes. I've been running one for a while and it was fine for several
> days. It flickered occasionally for a few more days and has since
> stabilized. They look nice so hopefully they just take some time to
> settle. Let me know how they work for you when you get around to using
> them.
>
--
You received this message because you are subscribed to the Google Groups
"neonixie-l" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to neonixie-l+unsubscr...@googlegroups.com.
To view this discussion on the web, visit
https://groups.google.com/d/msgid/neonixie-l/eac9f287-a535-463c-aa3f-cb861781d355%40googlegroups.com.