[PATCH net-next] net: macb: Added PCI wrapper for Platform Driver.
There are hardware PCI implementations of Cadence GEM network controller. This
patch will allow to use such hardware with reuse of existing Platform Driver.
Signed-off-by: Bartosz Folta
---
drivers/net/ethernet/cadence/Kconfig| 9 ++
drivers/net/ethernet/cadence/Makefile | 1 +
drivers/net/ethernet/cadence/macb.c | 31 +--
drivers/net/ethernet/cadence/macb_pci.c | 152
include/linux/platform_data/macb.h | 6 ++
5 files changed, 194 insertions(+), 5 deletions(-) create mode 100644
drivers/net/ethernet/cadence/macb_pci.c
diff --git a/drivers/net/ethernet/cadence/Kconfig
b/drivers/net/ethernet/cadence/Kconfig
index f0bcb15..00d833e 100644
--- a/drivers/net/ethernet/cadence/Kconfig
+++ b/drivers/net/ethernet/cadence/Kconfig
@@ -31,4 +31,13 @@ config MACB
To compile this driver as a module, choose M here: the module
will be called macb.
+config MACB_PCI
+ tristate "Cadence PCI MACB/GEM support"
+ depends on MACB
+ ---help---
+ This is PCI wrapper for MACB driver.
+
+ To compile this driver as a module, choose M here: the module
+ will be called macb_pci.
+
endif # NET_CADENCE
diff --git a/drivers/net/ethernet/cadence/Makefile
b/drivers/net/ethernet/cadence/Makefile
index 91f79b1..4ba7559 100644
--- a/drivers/net/ethernet/cadence/Makefile
+++ b/drivers/net/ethernet/cadence/Makefile
@@ -3,3 +3,4 @@
#
obj-$(CONFIG_MACB) += macb.o
+obj-$(CONFIG_MACB_PCI) += macb_pci.o
diff --git a/drivers/net/ethernet/cadence/macb.c
b/drivers/net/ethernet/cadence/macb.c
index 538544a..c0fb80a 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -404,6 +404,8 @@ static int macb_mii_probe(struct net_device *dev)
phy_irq = gpio_to_irq(pdata->phy_irq_pin);
phydev->irq = (phy_irq < 0) ? PHY_POLL : phy_irq;
}
+ } else {
+ phydev->irq = PHY_POLL;
}
/* attach the mac to the phy */
@@ -482,6 +484,9 @@ static int macb_mii_init(struct macb *bp)
goto err_out_unregister_bus;
}
} else {
+ for (i = 0; i < PHY_MAX_ADDR; i++)
+ bp->mii_bus->irq[i] = PHY_POLL;
+
if (pdata)
bp->mii_bus->phy_mask = pdata->phy_mask;
@@ -2523,16 +2528,24 @@ static int macb_clk_init(struct platform_device *pdev,
struct clk **pclk,
struct clk **hclk, struct clk **tx_clk,
struct clk **rx_clk)
{
+ struct macb_platform_data *pdata;
int err;
- *pclk = devm_clk_get(&pdev->dev, "pclk");
+ pdata = dev_get_platdata(&pdev->dev);
+ if (pdata) {
+ *pclk = pdata->pclk;
+ *hclk = pdata->hclk;
+ } else {
+ *pclk = devm_clk_get(&pdev->dev, "pclk");
+ *hclk = devm_clk_get(&pdev->dev, "hclk");
+ }
+
if (IS_ERR(*pclk)) {
err = PTR_ERR(*pclk);
dev_err(&pdev->dev, "failed to get macb_clk (%u)\n", err);
return err;
}
- *hclk = devm_clk_get(&pdev->dev, "hclk");
if (IS_ERR(*hclk)) {
err = PTR_ERR(*hclk);
dev_err(&pdev->dev, "failed to get hclk (%u)\n", err); @@
-3107,15 +3120,23 @@ static int at91ether_init(struct platform_device *pdev)
MODULE_DEVICE_TABLE(of, macb_dt_ids); #endif /* CONFIG_OF */
+static const struct macb_config default_gem_config = {
+ .caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE | MACB_CAPS_JUMBO,
+ .dma_burst_length = 16,
+ .clk_init = macb_clk_init,
+ .init = macb_init,
+ .jumbo_max_len = 10240,
+};
+
static int macb_probe(struct platform_device *pdev) {
+ const struct macb_config *macb_config = &default_gem_config;
int (*clk_init)(struct platform_device *, struct clk **,
struct clk **, struct clk **, struct clk **)
- = macb_clk_init;
- int (*init)(struct platform_device *) = macb_init;
+ = macb_config->clk_init;
+ int (*init)(struct platform_device *) = macb_config->init;
struct device_node *np = pdev->dev.of_node;
struct device_node *phy_node;
- const struct macb_config *macb_config = NULL;
struct clk *pclk, *hclk = NULL, *tx_clk = NULL, *rx_clk = NULL;
unsigned int queue_mask, num_queues;
struct macb_platform_data *pdata;
diff --git a/drivers/net/ethernet/cadence/macb_pci.c
b/drivers/net/ethernet/cadence/macb_pci.c
new file mode 100644
index 000..b440960
--- /dev/null
+++ b/drivers/net/ethernet/cadence/macb_pci.c
@@
[PATCH v2] net: macb: Added PCI wrapper for Platform Driver.
There are hardware PCI implementations of Cadence GEM network
controller. This patch will allow to use such hardware with reuse of
existing Platform Driver.
Signed-off-by: Bartosz Folta
---
Changed in v2:
Respin to net-next. Changed patch formatting.
---
drivers/net/ethernet/cadence/Kconfig| 9 ++
drivers/net/ethernet/cadence/Makefile | 1 +
drivers/net/ethernet/cadence/macb.c | 31 +--
drivers/net/ethernet/cadence/macb_pci.c | 152
include/linux/platform_data/macb.h | 6 ++
5 files changed, 194 insertions(+), 5 deletions(-)
create mode 100644 drivers/net/ethernet/cadence/macb_pci.c
diff --git a/drivers/net/ethernet/cadence/Kconfig
b/drivers/net/ethernet/cadence/Kconfig
index f0bcb15..00d833e 100644
--- a/drivers/net/ethernet/cadence/Kconfig
+++ b/drivers/net/ethernet/cadence/Kconfig
@@ -31,4 +31,13 @@ config MACB
To compile this driver as a module, choose M here: the module
will be called macb.
+config MACB_PCI
+ tristate "Cadence PCI MACB/GEM support"
+ depends on MACB
+ ---help---
+ This is PCI wrapper for MACB driver.
+
+ To compile this driver as a module, choose M here: the module
+ will be called macb_pci.
+
endif # NET_CADENCE
diff --git a/drivers/net/ethernet/cadence/Makefile
b/drivers/net/ethernet/cadence/Makefile
index 91f79b1..4ba7559 100644
--- a/drivers/net/ethernet/cadence/Makefile
+++ b/drivers/net/ethernet/cadence/Makefile
@@ -3,3 +3,4 @@
#
obj-$(CONFIG_MACB) += macb.o
+obj-$(CONFIG_MACB_PCI) += macb_pci.o
diff --git a/drivers/net/ethernet/cadence/macb.c
b/drivers/net/ethernet/cadence/macb.c
index 538544a..c0fb80a 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -404,6 +404,8 @@ static int macb_mii_probe(struct net_device *dev)
phy_irq = gpio_to_irq(pdata->phy_irq_pin);
phydev->irq = (phy_irq < 0) ? PHY_POLL : phy_irq;
}
+ } else {
+ phydev->irq = PHY_POLL;
}
/* attach the mac to the phy */
@@ -482,6 +484,9 @@ static int macb_mii_init(struct macb *bp)
goto err_out_unregister_bus;
}
} else {
+ for (i = 0; i < PHY_MAX_ADDR; i++)
+ bp->mii_bus->irq[i] = PHY_POLL;
+
if (pdata)
bp->mii_bus->phy_mask = pdata->phy_mask;
@@ -2523,16 +2528,24 @@ static int macb_clk_init(struct platform_device *pdev,
struct clk **pclk,
struct clk **hclk, struct clk **tx_clk,
struct clk **rx_clk)
{
+ struct macb_platform_data *pdata;
int err;
- *pclk = devm_clk_get(&pdev->dev, "pclk");
+ pdata = dev_get_platdata(&pdev->dev);
+ if (pdata) {
+ *pclk = pdata->pclk;
+ *hclk = pdata->hclk;
+ } else {
+ *pclk = devm_clk_get(&pdev->dev, "pclk");
+ *hclk = devm_clk_get(&pdev->dev, "hclk");
+ }
+
if (IS_ERR(*pclk)) {
err = PTR_ERR(*pclk);
dev_err(&pdev->dev, "failed to get macb_clk (%u)\n", err);
return err;
}
- *hclk = devm_clk_get(&pdev->dev, "hclk");
if (IS_ERR(*hclk)) {
err = PTR_ERR(*hclk);
dev_err(&pdev->dev, "failed to get hclk (%u)\n", err);
@@ -3107,15 +3120,23 @@ static int at91ether_init(struct platform_device *pdev)
MODULE_DEVICE_TABLE(of, macb_dt_ids);
#endif /* CONFIG_OF */
+static const struct macb_config default_gem_config = {
+ .caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE | MACB_CAPS_JUMBO,
+ .dma_burst_length = 16,
+ .clk_init = macb_clk_init,
+ .init = macb_init,
+ .jumbo_max_len = 10240,
+};
+
static int macb_probe(struct platform_device *pdev)
{
+ const struct macb_config *macb_config = &default_gem_config;
int (*clk_init)(struct platform_device *, struct clk **,
struct clk **, struct clk **, struct clk **)
- = macb_clk_init;
- int (*init)(struct platform_device *) = macb_init;
+ = macb_config->clk_init;
+ int (*init)(struct platform_device *) = macb_config->init;
struct device_node *np = pdev->dev.of_node;
struct device_node *phy_node;
- const struct macb_config *macb_config = NULL;
struct clk *pclk, *hclk = NULL, *tx_clk = NULL, *rx_clk = NULL;
unsigned int queue_mask, num_queues;
struct macb_platform_data *pdata;
diff --git a/drivers/net/ethernet/cadence/macb_pci.c
b/drivers/net/ethernet/cadence/macb_pci.c
new file mode 100644
index 000..b44096
[PATCH v3] net: macb: Added PCI wrapper for Platform Driver.
There are hardware PCI implementations of Cadence GEM network
controller. This patch will allow to use such hardware with reuse of
existing Platform Driver.
Signed-off-by: Bartosz Folta
---
Changed in v3:
Fixed dependencies in Kconfig.
---
Changed in v2:
Respin to net-next. Changed patch formatting.
---
drivers/net/ethernet/cadence/Kconfig| 9 ++
drivers/net/ethernet/cadence/Makefile | 1 +
drivers/net/ethernet/cadence/macb.c | 31 +--
drivers/net/ethernet/cadence/macb_pci.c | 153
include/linux/platform_data/macb.h | 6 ++
5 files changed, 195 insertions(+), 5 deletions(-)
create mode 100644 drivers/net/ethernet/cadence/macb_pci.c
diff --git a/drivers/net/ethernet/cadence/Kconfig
b/drivers/net/ethernet/cadence/Kconfig
index f0bcb15..608bea1 100644
--- a/drivers/net/ethernet/cadence/Kconfig
+++ b/drivers/net/ethernet/cadence/Kconfig
@@ -31,4 +31,13 @@ config MACB
To compile this driver as a module, choose M here: the module
will be called macb.
+config MACB_PCI
+ tristate "Cadence PCI MACB/GEM support"
+ depends on MACB && PCI && COMMON_CLK
+ ---help---
+ This is PCI wrapper for MACB driver.
+
+ To compile this driver as a module, choose M here: the module
+ will be called macb_pci.
+
endif # NET_CADENCE
diff --git a/drivers/net/ethernet/cadence/Makefile
b/drivers/net/ethernet/cadence/Makefile
index 91f79b1..4ba7559 100644
--- a/drivers/net/ethernet/cadence/Makefile
+++ b/drivers/net/ethernet/cadence/Makefile
@@ -3,3 +3,4 @@
#
obj-$(CONFIG_MACB) += macb.o
+obj-$(CONFIG_MACB_PCI) += macb_pci.o
diff --git a/drivers/net/ethernet/cadence/macb.c
b/drivers/net/ethernet/cadence/macb.c
index 538544a..c0fb80a 100644
--- a/drivers/net/ethernet/cadence/macb.c
+++ b/drivers/net/ethernet/cadence/macb.c
@@ -404,6 +404,8 @@ static int macb_mii_probe(struct net_device *dev)
phy_irq = gpio_to_irq(pdata->phy_irq_pin);
phydev->irq = (phy_irq < 0) ? PHY_POLL : phy_irq;
}
+ } else {
+ phydev->irq = PHY_POLL;
}
/* attach the mac to the phy */
@@ -482,6 +484,9 @@ static int macb_mii_init(struct macb *bp)
goto err_out_unregister_bus;
}
} else {
+ for (i = 0; i < PHY_MAX_ADDR; i++)
+ bp->mii_bus->irq[i] = PHY_POLL;
+
if (pdata)
bp->mii_bus->phy_mask = pdata->phy_mask;
@@ -2523,16 +2528,24 @@ static int macb_clk_init(struct platform_device *pdev,
struct clk **pclk,
struct clk **hclk, struct clk **tx_clk,
struct clk **rx_clk)
{
+ struct macb_platform_data *pdata;
int err;
- *pclk = devm_clk_get(&pdev->dev, "pclk");
+ pdata = dev_get_platdata(&pdev->dev);
+ if (pdata) {
+ *pclk = pdata->pclk;
+ *hclk = pdata->hclk;
+ } else {
+ *pclk = devm_clk_get(&pdev->dev, "pclk");
+ *hclk = devm_clk_get(&pdev->dev, "hclk");
+ }
+
if (IS_ERR(*pclk)) {
err = PTR_ERR(*pclk);
dev_err(&pdev->dev, "failed to get macb_clk (%u)\n", err);
return err;
}
- *hclk = devm_clk_get(&pdev->dev, "hclk");
if (IS_ERR(*hclk)) {
err = PTR_ERR(*hclk);
dev_err(&pdev->dev, "failed to get hclk (%u)\n", err);
@@ -3107,15 +3120,23 @@ static int at91ether_init(struct platform_device *pdev)
MODULE_DEVICE_TABLE(of, macb_dt_ids);
#endif /* CONFIG_OF */
+static const struct macb_config default_gem_config = {
+ .caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE | MACB_CAPS_JUMBO,
+ .dma_burst_length = 16,
+ .clk_init = macb_clk_init,
+ .init = macb_init,
+ .jumbo_max_len = 10240,
+};
+
static int macb_probe(struct platform_device *pdev)
{
+ const struct macb_config *macb_config = &default_gem_config;
int (*clk_init)(struct platform_device *, struct clk **,
struct clk **, struct clk **, struct clk **)
- = macb_clk_init;
- int (*init)(struct platform_device *) = macb_init;
+ = macb_config->clk_init;
+ int (*init)(struct platform_device *) = macb_config->init;
struct device_node *np = pdev->dev.of_node;
struct device_node *phy_node;
- const struct macb_config *macb_config = NULL;
struct clk *pclk, *hclk = NULL, *tx_clk = NULL, *rx_clk = NULL;
unsigned int queue_mask, num_queues;
struct macb_platform_data *pdata;
diff --git a/drivers/net/ethernet/cadence/macb_pci.c
[PATCH] net: macb: Applied changes according to review made by Andy Shevchenko.
This patch is sent in regard to recently applied patch
Commit 83a77e9ec4150ee4acc635638f7dedd9da523a26
net: macb: Added PCI wrapper for Platform Driver.
Andy's review does not appear on mailing lists. I can't reference it.
Signed-off-by: Bartosz Folta
---
drivers/net/ethernet/cadence/macb_pci.c | 25 +
1 file changed, 9 insertions(+), 16 deletions(-)
diff --git a/drivers/net/ethernet/cadence/macb_pci.c
b/drivers/net/ethernet/cadence/macb_pci.c
index 92be2cd..6cec52c 100644
--- a/drivers/net/ethernet/cadence/macb_pci.c
+++ b/drivers/net/ethernet/cadence/macb_pci.c
@@ -1,5 +1,5 @@
/**
- * macb_pci.c - Cadence GEM PCI wrapper.
+ * Cadence GEM PCI wrapper.
*
* Copyright (C) 2016 Cadence Design Systems - http://www.cadence.com
*
@@ -45,32 +45,27 @@ static int macb_probe(struct pci_dev *pdev, const struct
pci_device_id *id)
struct macb_platform_data plat_data;
struct resource res[2];
- /* sanity check */
- if (!id)
- return -EINVAL;
-
/* enable pci device */
- err = pci_enable_device(pdev);
+ err = pcim_enable_device(pdev);
if (err < 0) {
- dev_err(&pdev->dev, "Enabling PCI device has failed: 0x%04X",
- err);
- return -EACCES;
+ dev_err(&pdev->dev, "Enabling PCI device has failed: %d", err);
+ return err;
}
pci_set_master(pdev);
/* set up resources */
memset(res, 0x00, sizeof(struct resource) * ARRAY_SIZE(res));
- res[0].start = pdev->resource[0].start;
- res[0].end = pdev->resource[0].end;
+ res[0].start = pci_resource_start(pdev, 0);
+ res[0].end = pci_resource_end(pdev, 0);
res[0].name = PCI_DRIVER_NAME;
res[0].flags = IORESOURCE_MEM;
- res[1].start = pdev->irq;
+ res[1].start = pci_irq_vector(pdev, 0);
res[1].name = PCI_DRIVER_NAME;
res[1].flags = IORESOURCE_IRQ;
- dev_info(&pdev->dev, "EMAC physical base addr = 0x%p\n",
-(void *)(uintptr_t)pci_resource_start(pdev, 0));
+ dev_info(&pdev->dev, "EMAC physical base addr: %pa\n",
+&res[0].start);
/* set up macb platform data */
memset(&plat_data, 0, sizeof(plat_data));
@@ -120,7 +115,6 @@ static int macb_probe(struct pci_dev *pdev, const struct
pci_device_id *id)
clk_unregister(plat_data.pclk);
err_pclk_register:
- pci_disable_device(pdev);
return err;
}
@@ -130,7 +124,6 @@ static void macb_remove(struct pci_dev *pdev)
struct macb_platform_data *plat_data = dev_get_platdata(&plat_dev->dev);
platform_device_unregister(plat_dev);
- pci_disable_device(pdev);
clk_unregister(plat_data->pclk);
clk_unregister(plat_data->hclk);
}
--
1.9.1
RE: [PATCH v3] net: macb: Added PCI wrapper for Platform Driver.
Please find link to patch holding changes that you suggested: https://lkml.kernel.org/r/sn1pr0701mb1951b994f86160a24c436f30cc...@sn1pr0701mb1951.namprd07.prod.outlook.com Here is alternative link to mentioned patch. https://patchwork.ozlabs.org/patch/707720/ I think that there is a delay on some mailing lists (marc.info and mail-archive.com). Latest messages I found there are from December 16th 2016. Regards, Bartosz Folta
[PATCH v2] net: macb: Applied changes according to review made by Andy Shevchenko.
This patch is sent in regard to recently applied patch
Commit 83a77e9ec4150ee4acc635638f7dedd9da523a26
net: macb: Added PCI wrapper for Platform Driver.
Signed-off-by: Bartosz Folta
---
Changed in v2:
Size of DMA mask is set based on value held by PCI device.
---
drivers/net/ethernet/cadence/macb_pci.c | 27 ++-
1 file changed, 10 insertions(+), 17 deletions(-)
diff --git a/drivers/net/ethernet/cadence/macb_pci.c
b/drivers/net/ethernet/cadence/macb_pci.c
index 92be2cd..9906fda 100644
--- a/drivers/net/ethernet/cadence/macb_pci.c
+++ b/drivers/net/ethernet/cadence/macb_pci.c
@@ -1,5 +1,5 @@
/**
- * macb_pci.c - Cadence GEM PCI wrapper.
+ * Cadence GEM PCI wrapper.
*
* Copyright (C) 2016 Cadence Design Systems - http://www.cadence.com
*
@@ -45,32 +45,27 @@ static int macb_probe(struct pci_dev *pdev, const struct
pci_device_id *id)
struct macb_platform_data plat_data;
struct resource res[2];
- /* sanity check */
- if (!id)
- return -EINVAL;
-
/* enable pci device */
- err = pci_enable_device(pdev);
+ err = pcim_enable_device(pdev);
if (err < 0) {
- dev_err(&pdev->dev, "Enabling PCI device has failed: 0x%04X",
- err);
- return -EACCES;
+ dev_err(&pdev->dev, "Enabling PCI device has failed: %d", err);
+ return err;
}
pci_set_master(pdev);
/* set up resources */
memset(res, 0x00, sizeof(struct resource) * ARRAY_SIZE(res));
- res[0].start = pdev->resource[0].start;
- res[0].end = pdev->resource[0].end;
+ res[0].start = pci_resource_start(pdev, 0);
+ res[0].end = pci_resource_end(pdev, 0);
res[0].name = PCI_DRIVER_NAME;
res[0].flags = IORESOURCE_MEM;
- res[1].start = pdev->irq;
+ res[1].start = pci_irq_vector(pdev, 0);
res[1].name = PCI_DRIVER_NAME;
res[1].flags = IORESOURCE_IRQ;
- dev_info(&pdev->dev, "EMAC physical base addr = 0x%p\n",
-(void *)(uintptr_t)pci_resource_start(pdev, 0));
+ dev_info(&pdev->dev, "EMAC physical base addr: %pa\n",
+&res[0].start);
/* set up macb platform data */
memset(&plat_data, 0, sizeof(plat_data));
@@ -100,7 +95,7 @@ static int macb_probe(struct pci_dev *pdev, const struct
pci_device_id *id)
plat_info.num_res = ARRAY_SIZE(res);
plat_info.data = &plat_data;
plat_info.size_data = sizeof(plat_data);
- plat_info.dma_mask = DMA_BIT_MASK(32);
+ plat_info.dma_mask = pdev->dma_mask;
/* register platform device */
plat_dev = platform_device_register_full(&plat_info);
@@ -120,7 +115,6 @@ static int macb_probe(struct pci_dev *pdev, const struct
pci_device_id *id)
clk_unregister(plat_data.pclk);
err_pclk_register:
- pci_disable_device(pdev);
return err;
}
@@ -130,7 +124,6 @@ static void macb_remove(struct pci_dev *pdev)
struct macb_platform_data *plat_data = dev_get_platdata(&plat_dev->dev);
platform_device_unregister(plat_dev);
- pci_disable_device(pdev);
clk_unregister(plat_data->pclk);
clk_unregister(plat_data->hclk);
}
--
1.9.1
RE: [PATCH v3] net: macb: Added PCI wrapper for Platform Driver.
> And one more > > + plat_info.dma_mask = DMA_BIT_MASK(32); > > Perhaps > plat_info.dma_mask = pdev->dma_mask; > ? Thank you. I tested your suggestion. I have sent second version of patch. https://patchwork.ozlabs.org/patch/707800/ Regards, Bartosz Folta
[PATCH v3] net: macb: Updated resource allocation function calls to new version of API.
Changed function calls of resource allocation to new API. Changed way
of setting DMA mask. Removed unnecessary sanity check.
This patch is sent in regard to recently applied patch
Commit 83a77e9ec4150ee4acc635638f7dedd9da523a26
net: macb: Added PCI wrapper for Platform Driver.
Signed-off-by: Bartosz Folta
---
Changed in v3:
Commit message.
---
Changed in v2:
Size of DMA mask is set based on value held by PCI device.
---
drivers/net/ethernet/cadence/macb_pci.c | 27 ++-
1 file changed, 10 insertions(+), 17 deletions(-)
diff --git a/drivers/net/ethernet/cadence/macb_pci.c
b/drivers/net/ethernet/cadence/macb_pci.c
index 92be2cd..9906fda 100644
--- a/drivers/net/ethernet/cadence/macb_pci.c
+++ b/drivers/net/ethernet/cadence/macb_pci.c
@@ -1,5 +1,5 @@
/**
- * macb_pci.c - Cadence GEM PCI wrapper.
+ * Cadence GEM PCI wrapper.
*
* Copyright (C) 2016 Cadence Design Systems - http://www.cadence.com
*
@@ -45,32 +45,27 @@ static int macb_probe(struct pci_dev *pdev, const struct
pci_device_id *id)
struct macb_platform_data plat_data;
struct resource res[2];
- /* sanity check */
- if (!id)
- return -EINVAL;
-
/* enable pci device */
- err = pci_enable_device(pdev);
+ err = pcim_enable_device(pdev);
if (err < 0) {
- dev_err(&pdev->dev, "Enabling PCI device has failed: 0x%04X",
- err);
- return -EACCES;
+ dev_err(&pdev->dev, "Enabling PCI device has failed: %d", err);
+ return err;
}
pci_set_master(pdev);
/* set up resources */
memset(res, 0x00, sizeof(struct resource) * ARRAY_SIZE(res));
- res[0].start = pdev->resource[0].start;
- res[0].end = pdev->resource[0].end;
+ res[0].start = pci_resource_start(pdev, 0);
+ res[0].end = pci_resource_end(pdev, 0);
res[0].name = PCI_DRIVER_NAME;
res[0].flags = IORESOURCE_MEM;
- res[1].start = pdev->irq;
+ res[1].start = pci_irq_vector(pdev, 0);
res[1].name = PCI_DRIVER_NAME;
res[1].flags = IORESOURCE_IRQ;
- dev_info(&pdev->dev, "EMAC physical base addr = 0x%p\n",
-(void *)(uintptr_t)pci_resource_start(pdev, 0));
+ dev_info(&pdev->dev, "EMAC physical base addr: %pa\n",
+&res[0].start);
/* set up macb platform data */
memset(&plat_data, 0, sizeof(plat_data));
@@ -100,7 +95,7 @@ static int macb_probe(struct pci_dev *pdev, const struct
pci_device_id *id)
plat_info.num_res = ARRAY_SIZE(res);
plat_info.data = &plat_data;
plat_info.size_data = sizeof(plat_data);
- plat_info.dma_mask = DMA_BIT_MASK(32);
+ plat_info.dma_mask = pdev->dma_mask;
/* register platform device */
plat_dev = platform_device_register_full(&plat_info);
@@ -120,7 +115,6 @@ static int macb_probe(struct pci_dev *pdev, const struct
pci_device_id *id)
clk_unregister(plat_data.pclk);
err_pclk_register:
- pci_disable_device(pdev);
return err;
}
@@ -130,7 +124,6 @@ static void macb_remove(struct pci_dev *pdev)
struct macb_platform_data *plat_data = dev_get_platdata(&plat_dev->dev);
platform_device_unregister(plat_dev);
- pci_disable_device(pdev);
clk_unregister(plat_data->pclk);
clk_unregister(plat_data->hclk);
}
--
1.9.1
