pasemi_mac: use buffer index pointer in clean_rx()
Use the new features in B0 for buffer ring index on the receive side. This
means we no longer have to search in the ring for where the buffer
came from.
Also cleanup the RX cleaning side a little, while I was at it.
Note: Pre-B0 hardware is no longer supported, and needs a pile of other
workarounds that are not being submitted for mainline inclusion. So the
fact that this breaks old hardware is not a problem at this time.
Signed-off-by: Olof Johansson [EMAIL PROTECTED]
Index: k.org/drivers/net/pasemi_mac.c
===
--- k.org.orig/drivers/net/pasemi_mac.c
+++ k.org/drivers/net/pasemi_mac.c
@@ -243,9 +243,9 @@ static int pasemi_mac_setup_rx_resources
PAS_DMA_RXINT_BASEU_SIZ(RX_RING_SIZE 3));
write_dma_reg(mac, PAS_DMA_RXINT_CFG(mac-dma_if),
- PAS_DMA_RXINT_CFG_DHL(3) |
- PAS_DMA_RXINT_CFG_L2 |
- PAS_DMA_RXINT_CFG_LW);
+ PAS_DMA_RXINT_CFG_DHL(3) | PAS_DMA_RXINT_CFG_L2 |
+ PAS_DMA_RXINT_CFG_LW | PAS_DMA_RXINT_CFG_RBP |
+ PAS_DMA_RXINT_CFG_HEN);
ring-next_to_fill = 0;
ring-next_to_clean = 0;
@@ -402,13 +402,12 @@ static void pasemi_mac_free_rx_resources
static void pasemi_mac_replenish_rx_ring(struct net_device *dev, int limit)
{
struct pasemi_mac *mac = netdev_priv(dev);
- int start = mac-rx-next_to_fill;
- unsigned int fill, count;
+ int fill, count;
if (limit = 0)
return;
- fill = start;
+ fill = mac-rx-next_to_fill;
for (count = 0; count limit; count++) {
struct pasemi_mac_buffer *info = RX_RING_INFO(mac, fill);
u64 *buff = RX_BUFF(mac, fill);
@@ -446,10 +445,10 @@ static void pasemi_mac_replenish_rx_ring
wmb();
- write_dma_reg(mac, PAS_DMA_RXCHAN_INCR(mac-dma_rxch), count);
write_dma_reg(mac, PAS_DMA_RXINT_INCR(mac-dma_if), count);
- mac-rx-next_to_fill += count;
+ mac-rx-next_to_fill = (mac-rx-next_to_fill + count)
+ (RX_RING_SIZE - 1);
}
static void pasemi_mac_restart_rx_intr(struct pasemi_mac *mac)
@@ -517,15 +516,19 @@ static int pasemi_mac_clean_rx(struct pa
int count;
struct pasemi_mac_buffer *info;
struct sk_buff *skb;
- unsigned int i, len;
+ unsigned int len;
u64 macrx;
dma_addr_t dma;
+ int buf_index;
+ u64 eval;
spin_lock(mac-rx-lock);
n = mac-rx-next_to_clean;
- for (count = limit; count; count--) {
+ prefetch(RX_RING(mac, n));
+
+ for (count = 0; count limit; count++) {
macrx = RX_RING(mac, n);
if ((macrx XCT_MACRX_E) ||
@@ -537,21 +540,14 @@ static int pasemi_mac_clean_rx(struct pa
info = NULL;
- /* We have to scan for our skb since there's no way
-* to back-map them from the descriptor, and if we
-* have several receive channels then they might not
-* show up in the same order as they were put on the
-* interface ring.
-*/
+ BUG_ON(!(macrx XCT_MACRX_RR_8BRES));
- dma = (RX_RING(mac, n+1) XCT_PTR_ADDR_M);
- for (i = mac-rx-next_to_fill;
-i (mac-rx-next_to_fill + RX_RING_SIZE);
-i++) {
- info = RX_RING_INFO(mac, i);
- if (info-dma == dma)
- break;
- }
+ eval = (RX_RING(mac, n+1) XCT_RXRES_8B_EVAL_M)
+ XCT_RXRES_8B_EVAL_S;
+ buf_index = eval-1;
+
+ dma = (RX_RING(mac, n+2) XCT_PTR_ADDR_M);
+ info = RX_RING_INFO(mac, buf_index);
skb = info-skb;
@@ -600,9 +596,9 @@ static int pasemi_mac_clean_rx(struct pa
/* Need to zero it out since hardware doesn't, since the
* replenish loop uses it to tell when it's done.
*/
- RX_BUFF(mac, i) = 0;
+ RX_BUFF(mac, buf_index) = 0;
- n += 2;
+ n += 4;
}
if (n RX_RING_SIZE) {
@@ -610,8 +606,16 @@ static int pasemi_mac_clean_rx(struct pa
write_iob_reg(mac, PAS_IOB_COM_PKTHDRCNT, 0);
n = (RX_RING_SIZE-1);
}
+
mac-rx-next_to_clean = n;
- pasemi_mac_replenish_rx_ring(mac-netdev, limit-count);
+
+ /* Increase is in number of 16-byte entries, and since each descriptor
+* with an 8BRES takes up 3x8 bytes (padded to 4x8), increase with
+* count*2.
+*/
+ write_dma_reg(mac, PAS_DMA_RXCHAN_INCR(mac-dma_rxch), count 1);
+
+
