From: Jeb Cramer <[EMAIL PROTECTED]>
Adapter-specific code for the 82542.
Signed-off-by: Jeb Cramer <[EMAIL PROTECTED]>
Signed-off-by: Auke Kok <[EMAIL PROTECTED]>
---
drivers/net/e1000/e1000_82542.c | 551 +++++++++++++++++++++++++++++++++++++++
1 files changed, 551 insertions(+), 0 deletions(-)
diff --git a/drivers/net/e1000/e1000_82542.c b/drivers/net/e1000/e1000_82542.c
new file mode 100644
index 0000000..adca182
--- /dev/null
+++ b/drivers/net/e1000/e1000_82542.c
@@ -0,0 +1,551 @@
+/*******************************************************************************
+
+ Intel PRO/1000 Linux driver
+ Copyright(c) 1999 - 2007 Intel Corporation.
+
+ This program is free software; you can redistribute it and/or modify it
+ under the terms and conditions of the GNU General Public License,
+ version 2, as published by the Free Software Foundation.
+
+ This program is distributed in the hope it will be useful, but WITHOUT
+ ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ more details.
+
+ You should have received a copy of the GNU General Public License along with
+ this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+ The full GNU General Public License is included in this distribution in
+ the file called "COPYING".
+
+ Contact Information:
+ Linux NICS <[EMAIL PROTECTED]>
+ e1000-devel Mailing List <[EMAIL PROTECTED]>
+ Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+
+*******************************************************************************/
+
+/* e1000_82542 (rev 1 & 2)
+ */
+
+#include "e1000_api.h"
+
+void e1000_init_function_pointers_82542(struct e1000_hw *hw);
+
+static s32 e1000_init_phy_params_82542(struct e1000_hw *hw);
+static s32 e1000_init_nvm_params_82542(struct e1000_hw *hw);
+static s32 e1000_init_mac_params_82542(struct e1000_hw *hw);
+static s32 e1000_get_bus_info_82542(struct e1000_hw *hw);
+static s32 e1000_reset_hw_82542(struct e1000_hw *hw);
+static s32 e1000_init_hw_82542(struct e1000_hw *hw);
+static s32 e1000_setup_link_82542(struct e1000_hw *hw);
+static s32 e1000_led_on_82542(struct e1000_hw *hw);
+static s32 e1000_led_off_82542(struct e1000_hw *hw);
+static void e1000_clear_hw_cntrs_82542(struct e1000_hw *hw);
+
+struct e1000_dev_spec_82542 {
+ boolean_t dma_fairness;
+};
+
+/**
+ * e1000_init_phy_params_82542 - Init PHY func ptrs.
+ * @hw: pointer to the HW structure
+ *
+ * This is a function pointer entry point called by the api module.
+ **/
+static s32
+e1000_init_phy_params_82542(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val = E1000_SUCCESS;
+
+ DEBUGFUNC("e1000_init_phy_params_82542");
+
+ phy->type = e1000_phy_none;
+
+ return ret_val;
+}
+
+/**
+ * e1000_init_nvm_params_82542 - Init NVM func ptrs.
+ * @hw: pointer to the HW structure
+ *
+ * This is a function pointer entry point called by the api module.
+ **/
+static s32
+e1000_init_nvm_params_82542(struct e1000_hw *hw)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ struct e1000_functions *func = &hw->func;
+
+ DEBUGFUNC("e1000_init_nvm_params_82542");
+
+ nvm->address_bits = 6;
+ nvm->delay_usec = 50;
+ nvm->opcode_bits = 3;
+ nvm->type = e1000_nvm_eeprom_microwire;
+ nvm->word_size = 64;
+
+ /* Function Pointers */
+ func->read_nvm = e1000_read_nvm_microwire;
+ func->release_nvm = e1000_stop_nvm;
+ func->write_nvm = e1000_write_nvm_microwire;
+ func->update_nvm = e1000_update_nvm_checksum_generic;
+ func->validate_nvm = e1000_validate_nvm_checksum_generic;
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_init_mac_params_82542 - Init MAC func ptrs.
+ * @hw: pointer to the HW structure
+ *
+ * This is a function pointer entry point called by the api module.
+ **/
+static s32
+e1000_init_mac_params_82542(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ struct e1000_functions *func = &hw->func;
+ s32 ret_val = E1000_SUCCESS;
+
+ DEBUGFUNC("e1000_init_mac_params_82542");
+
+ /* Set media type */
+ hw->media_type = e1000_media_type_fiber;
+
+ /* Set mta register count */
+ mac->mta_reg_count = 128;
+ /* Set rar entry count */
+ mac->rar_entry_count = E1000_RAR_ENTRIES;
+
+ /* Function pointers */
+
+ /* bus type/speed/width */
+ func->get_bus_info = e1000_get_bus_info_82542;
+ /* reset */
+ func->reset_hw = e1000_reset_hw_82542;
+ /* hw initialization */
+ func->init_hw = e1000_init_hw_82542;
+ /* link setup */
+ func->setup_link = e1000_setup_link_82542;
+ /* phy/fiber/serdes setup */
+ func->setup_physical_interface = e1000_setup_fiber_serdes_link_generic;
+ /* check for link */
+ func->check_for_link = e1000_check_for_fiber_link_generic;
+ /* multicast address update */
+ func->mc_addr_list_update = e1000_mc_addr_list_update_generic;
+ /* writing VFTA */
+ func->write_vfta = e1000_write_vfta_generic;
+ /* clearing VFTA */
+ func->clear_vfta = e1000_clear_vfta_generic;
+ /* setting MTA */
+ func->mta_set = e1000_mta_set_generic;
+ /* turn on/off LED */
+ func->led_on = e1000_led_on_82542;
+ func->led_off = e1000_led_off_82542;
+ /* remove device */
+ func->remove_device = e1000_remove_device_generic;
+ /* clear hardware counters */
+ func->clear_hw_cntrs = e1000_clear_hw_cntrs_82542;
+ /* link info */
+ func->get_link_up_info =
e1000_get_speed_and_duplex_fiber_serdes_generic;
+
+ hw->dev_spec_size = sizeof(struct e1000_dev_spec_82542);
+
+ /* Device-specific structure allocation */
+ ret_val = e1000_alloc_zeroed_dev_spec_struct(hw, hw->dev_spec_size);
+
+ return ret_val;
+}
+
+/**
+ * e1000_init_function_pointers_82542 - Init func ptrs.
+ * @hw: pointer to the HW structure
+ *
+ * The only function explicitly called by the api module to initialize
+ * all function pointers and parameters.
+ **/
+void
+e1000_init_function_pointers_82542(struct e1000_hw *hw)
+{
+ DEBUGFUNC("e1000_init_function_pointers_82542");
+
+ hw->func.init_mac_params = e1000_init_mac_params_82542;
+ hw->func.init_nvm_params = e1000_init_nvm_params_82542;
+ hw->func.init_phy_params = e1000_init_phy_params_82542;
+}
+
+/**
+ * e1000_get_bus_info_82542 - Obtain bus information for adapter
+ * @hw: pointer to the HW structure
+ *
+ * This will obtain information about the HW bus for which the
+ * adaper is attached and stores it in the hw structure. This is a function
+ * pointer entry point called by the api module.
+ **/
+static s32
+e1000_get_bus_info_82542(struct e1000_hw *hw)
+{
+ DEBUGFUNC("e1000_get_bus_info_82542");
+
+ hw->bus.type = e1000_bus_type_pci;
+ hw->bus.speed = e1000_bus_speed_unknown;
+ hw->bus.width = e1000_bus_width_unknown;
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_reset_hw_82542 - Reset hardware
+ * @hw: pointer to the HW structure
+ *
+ * This resets the hardware into a known state. This is a
+ * function pointer entry point called by the api module.
+ **/
+static s32
+e1000_reset_hw_82542(struct e1000_hw *hw)
+{
+ struct e1000_bus_info *bus = &hw->bus;
+ s32 ret_val = E1000_SUCCESS;
+ u32 ctrl, icr;
+
+ DEBUGFUNC("e1000_reset_hw_82542");
+
+ if (hw->revision_id == E1000_REVISION_2) {
+ DEBUGOUT("Disabling MWI on 82542 rev 2\n");
+ e1000_pci_clear_mwi(hw);
+ }
+
+ DEBUGOUT("Masking off all interrupts\n");
+ E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff);
+
+ E1000_WRITE_REG(hw, E1000_RCTL, 0);
+ E1000_WRITE_REG(hw, E1000_TCTL, E1000_TCTL_PSP);
+ E1000_WRITE_FLUSH(hw);
+
+ /* Delay to allow any outstanding PCI transactions to complete before
+ * resetting the device
+ */
+ msleep(10);
+
+ ctrl = E1000_READ_REG(hw, E1000_CTRL);
+
+ DEBUGOUT("Issuing a global reset to 82542/82543 MAC\n");
+ E1000_WRITE_REG(hw, E1000_CTRL, ctrl | E1000_CTRL_RST);
+
+ e1000_reload_nvm(hw);
+ msleep(2);
+
+ E1000_WRITE_REG(hw, E1000_IMC, 0xffffffff);
+ icr = E1000_READ_REG(hw, E1000_ICR);
+
+ if (hw->revision_id == E1000_REVISION_2) {
+ if (bus->pci_cmd_word & PCI_COMMAND_INVALIDATE)
+ e1000_pci_set_mwi(hw);
+ }
+
+ return ret_val;
+}
+
+/**
+ * e1000_init_hw_82542 - Initialize hardware
+ * @hw: pointer to the HW structure
+ *
+ * This inits the hardware readying it for operation. This is a
+ * function pointer entry point called by the api module.
+ **/
+static s32
+e1000_init_hw_82542(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ struct e1000_dev_spec_82542 *dev_spec;
+ s32 ret_val = E1000_SUCCESS;
+ u32 ctrl;
+ u16 i;
+
+ DEBUGFUNC("e1000_init_hw_82542");
+
+ dev_spec = (struct e1000_dev_spec_82542 *)hw->dev_spec;
+
+ /* Disabling VLAN filtering */
+ E1000_WRITE_REG(hw, E1000_VET, 0);
+ e1000_clear_vfta(hw);
+
+ /* For 82542 (rev 2.0), disable MWI and put the receiver into reset */
+ if (hw->revision_id == E1000_REVISION_2) {
+ DEBUGOUT("Disabling MWI on 82542 rev 2.0\n");
+ e1000_pci_clear_mwi(hw);
+ E1000_WRITE_REG(hw, E1000_RCTL, E1000_RCTL_RST);
+ E1000_WRITE_FLUSH(hw);
+ msleep(5);
+ }
+
+ /* Setup the receive address. */
+ e1000_init_rx_addrs_generic(hw, mac->rar_entry_count);
+
+ /* For 82542 (rev 2.0), take the receiver out of reset and enable MWI */
+ if (hw->revision_id == E1000_REVISION_2) {
+ E1000_WRITE_REG(hw, E1000_RCTL, 0);
+ E1000_WRITE_FLUSH(hw);
+ msleep(1);
+ if (hw->bus.pci_cmd_word & PCI_COMMAND_INVALIDATE)
+ e1000_pci_set_mwi(hw);
+ }
+
+ /* Zero out the Multicast HASH table */
+ DEBUGOUT("Zeroing the MTA\n");
+ for (i = 0; i < mac->mta_reg_count; i++)
+ E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
+
+ /* Set the PCI priority bit correctly in the CTRL register. This
+ * determines if the adapter gives priority to receives, or if it
+ * gives equal priority to transmits and receives.
+ */
+ if (dev_spec->dma_fairness) {
+ ctrl = E1000_READ_REG(hw, E1000_CTRL);
+ E1000_WRITE_REG(hw, E1000_CTRL, ctrl | E1000_CTRL_PRIOR);
+ }
+
+ /* Setup link and flow control */
+ ret_val = e1000_setup_link_82542(hw);
+
+ /* Clear all of the statistics registers (clear on read). It is
+ * important that we do this after we have tried to establish link
+ * because the symbol error count will increment wildly if there
+ * is no link.
+ */
+ e1000_clear_hw_cntrs_82542(hw);
+
+ return ret_val;
+}
+
+/**
+ * e1000_setup_link_82542 - Setup flow control and link settings
+ * @hw: pointer to the HW structure
+ *
+ * Determines which flow control settings to use, then configures flow
+ * control. Calls the appropriate media-specific link configuration
+ * function. Assuming the adapter has a valid link partner, a valid link
+ * should be established. Assumes the hardware has previously been reset
+ * and the transmitter and receiver are not enabled. This is a function
+ * pointer entry point called by the api module.
+ **/
+static s32
+e1000_setup_link_82542(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ struct e1000_functions *func = &hw->func;
+ s32 ret_val = E1000_SUCCESS;
+
+ DEBUGFUNC("e1000_setup_link_82542");
+
+ ret_val = e1000_set_default_fc_generic(hw);
+ if (ret_val)
+ goto out;
+
+ mac->fc &= ~e1000_fc_tx_pause;
+
+ if (mac->report_tx_early == 1)
+ mac->fc &= ~e1000_fc_rx_pause;
+
+ /* We want to save off the original Flow Control configuration just in
+ * case we get disconnected and then reconnected into a different hub
+ * or switch with different Flow Control capabilities.
+ */
+ mac->original_fc = mac->fc;
+
+ DEBUGOUT1("After fix-ups FlowControl is now = %x\n", mac->fc);
+
+ /* Call the necessary subroutine to configure the link. */
+ ret_val = func->setup_physical_interface(hw);
+ if (ret_val)
+ goto out;
+
+ /* Initialize the flow control address, type, and PAUSE timer
+ * registers to their default values. This is done even if flow
+ * control is disabled, because it does not hurt anything to
+ * initialize these registers.
+ */
+ DEBUGOUT("Initializing Flow Control address, type and timer regs\n");
+
+ E1000_WRITE_REG(hw, E1000_FCAL, FLOW_CONTROL_ADDRESS_LOW);
+ E1000_WRITE_REG(hw, E1000_FCAH, FLOW_CONTROL_ADDRESS_HIGH);
+ E1000_WRITE_REG(hw, E1000_FCT, FLOW_CONTROL_TYPE);
+
+ E1000_WRITE_REG(hw, E1000_FCTTV, mac->fc_pause_time);
+
+ ret_val = e1000_set_fc_watermarks_generic(hw);
+
+out:
+ return ret_val;
+}
+
+/**
+ * e1000_led_on_82542 - Turn on SW controllable LED
+ * @hw: pointer to the HW structure
+ *
+ * Turns the SW defined LED on. This is a function pointer entry point
+ * called by the api module.
+ **/
+static s32
+e1000_led_on_82542(struct e1000_hw *hw)
+{
+ u32 ctrl = E1000_READ_REG(hw, E1000_CTRL);
+
+ DEBUGFUNC("e1000_led_on_82542");
+
+ ctrl |= E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_led_off_82542 - Turn off SW controllable LED
+ * @hw: pointer to the HW structure
+ *
+ * Turns the SW defined LED off. This is a function pointer entry point
+ * called by the api module.
+ **/
+static s32
+e1000_led_off_82542(struct e1000_hw *hw)
+{
+ u32 ctrl = E1000_READ_REG(hw, E1000_CTRL);
+
+ DEBUGFUNC("e1000_led_off_82542");
+
+ ctrl &= ~E1000_CTRL_SWDPIN0;
+ ctrl |= E1000_CTRL_SWDPIO0;
+ E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
+
+ return E1000_SUCCESS;
+}
+
+/**
+ * e1000_translate_register_82542 - Translate the proper regiser offset
+ * @reg: e1000 register to be read
+ *
+ * Registers in 82542 are located in different offsets than other adapters
+ * even though they function in the same manner. This function takes in
+ * the name of the register to read and returns the correct offset for
+ * 82542 silicon.
+ **/
+u32
+e1000_translate_register_82542(u32 reg)
+{
+ /* Some of the 82542 registers are located at different
+ * offsets than they are in newer adapters.
+ * Despite the difference in location, the registers
+ * function in the same manner.
+ */
+ switch (reg) {
+ case E1000_RA:
+ reg = 0x00040;
+ break;
+ case E1000_RDTR:
+ reg = 0x00108;
+ break;
+ case E1000_RDBAL:
+ reg = 0x00110;
+ break;
+ case E1000_RDBAH:
+ reg = 0x00114;
+ break;
+ case E1000_RDLEN:
+ reg = 0x00118;
+ break;
+ case E1000_RDH:
+ reg = 0x00120;
+ break;
+ case E1000_RDT:
+ reg = 0x00128;
+ break;
+ case E1000_RDBAL1:
+ reg = 0x00138;
+ break;
+ case E1000_RDBAH1:
+ reg = 0x0013C;
+ break;
+ case E1000_RDLEN1:
+ reg = 0x00140;
+ break;
+ case E1000_RDH1:
+ reg = 0x00148;
+ break;
+ case E1000_RDT1:
+ reg = 0x00150;
+ break;
+ case E1000_FCRTH:
+ reg = 0x00160;
+ break;
+ case E1000_FCRTL:
+ reg = 0x00168;
+ break;
+ case E1000_MTA:
+ reg = 0x00200;
+ break;
+ case E1000_TDBAL:
+ reg = 0x00420;
+ break;
+ case E1000_TDBAH:
+ reg = 0x00424;
+ break;
+ case E1000_TDLEN:
+ reg = 0x00428;
+ break;
+ case E1000_TDH:
+ reg = 0x00430;
+ break;
+ case E1000_TDT:
+ reg = 0x00438;
+ break;
+ case E1000_TIDV:
+ reg = 0x00440;
+ break;
+ case E1000_VFTA:
+ reg = 0x00600;
+ break;
+ case E1000_TDFH:
+ reg = 0x08010;
+ break;
+ case E1000_TDFT:
+ reg = 0x08018;
+ break;
+ default:
+ break;
+ }
+
+ return reg;
+}
+
+/**
+ * e1000_clear_hw_cntrs_82542 - Clear device specific hardware counters
+ * @hw: pointer to the HW structure
+ *
+ * Clears the hardware counters by reading the counter registers.
+ **/
+static void
+e1000_clear_hw_cntrs_82542(struct e1000_hw *hw)
+{
+ volatile u32 temp;
+
+ DEBUGFUNC("e1000_clear_hw_cntrs_82542");
+
+ e1000_clear_hw_cntrs_base_generic(hw);
+
+ temp = E1000_READ_REG(hw, E1000_PRC64);
+ temp = E1000_READ_REG(hw, E1000_PRC127);
+ temp = E1000_READ_REG(hw, E1000_PRC255);
+ temp = E1000_READ_REG(hw, E1000_PRC511);
+ temp = E1000_READ_REG(hw, E1000_PRC1023);
+ temp = E1000_READ_REG(hw, E1000_PRC1522);
+ temp = E1000_READ_REG(hw, E1000_PTC64);
+ temp = E1000_READ_REG(hw, E1000_PTC127);
+ temp = E1000_READ_REG(hw, E1000_PTC255);
+ temp = E1000_READ_REG(hw, E1000_PTC511);
+ temp = E1000_READ_REG(hw, E1000_PTC1023);
+ temp = E1000_READ_REG(hw, E1000_PTC1522);
+}
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
