2006-06-07 Amit S. Kale <[EMAIL PROTECTED]>
* Add netxen driver niu (hardware phy interface component)
handling routines
* Add netxen hardware CRB register definitions
diff -Naru linux-2.6.16.20.orig/drivers/net/netxen/netxen_nic_niu.c
linux-2.6.16.20/drivers/net/netxen/netxen_nic_niu.c
--- linux-2.6.16.20.orig/drivers/net/netxen/netxen_nic_niu.c 1969-12-31
16:00:00.000000000 -0800
+++ linux-2.6.16.20/drivers/net/netxen/netxen_nic_niu.c 2006-06-06
06:58:11.000000000 -0700
@@ -0,0 +1,761 @@
+/*
+ * Copyright (C) 2003 - 2006 NetXen, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+ * MA 02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.
+ *
+ * Contact Information:
+ * [EMAIL PROTECTED]
+ * NetXen,
+ * 3965 Freedom Circle, Fourth floor,
+ * Santa Clara, CA 95054
+ *
+ *
+ * Provides access to the Network Interface Unit h/w block.
+ *
+ */
+
+#include "netxen_nic.h"
+#include <linux/delay.h>
+
+/**
+ * netxen_niu_gbe_phy_read - read a register from the GbE PHY via
+ * mii management interface.
+ *
+ * Note: The MII management interface goes through port 0.
+ * Individual phys are addressed as follows:
+ * @param phy [15:8] phy id
+ * @param reg [7:0] register number
+ *
+ * @returns 0 on success
+ * -1 on error
+ *
+ **/
+long netxen_niu_gbe_phy_read(struct netxen_adapter *adapter, long phy,
+ long reg, netxen_crbword_t * readval)
+{
+ long timeout = 0;
+ long result = 0;
+ long restore = 0;
+ struct netxen_niu_gb_mii_mgmt_address address;
+ struct netxen_niu_gb_mii_mgmt_command command;
+ struct netxen_niu_gb_mii_mgmt_indicators status;
+ struct netxen_niu_gb_mii_mgmt_config mii_cfg;
+ struct netxen_niu_gb_mac_config_0_t mac_cfg0;
+
+ /* MII mgmt all goes through port 0 MAC interface, so it cannot be in
reset */
+ if (netxen_nic_hw_read_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0),
+ &mac_cfg0, 4))
+ return -EIO;
+ if (mac_cfg0.soft_reset) {
+ struct netxen_niu_gb_mac_config_0_t temp;
+ *(netxen_crbword_t *) & temp = 0;
+ temp.tx_reset_pb = 1;
+ temp.rx_reset_pb = 1;
+ temp.tx_reset_mac = 1;
+ temp.rx_reset_mac = 1;
+ if (netxen_nic_hw_write_wx(adapter,
+ NETXEN_NIU_GB_MAC_CONFIG_0(0),
+ &temp, 4))
+ return -EIO;
+ restore = 1;
+ }
+
+ /* reset MII management interface */
+ *(netxen_crbword_t *) & mii_cfg = 0;
+ mii_cfg.clockselect = 7;
+ mii_cfg.reset = 1;
+ if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_CONFIG(0),
+ &mii_cfg, 4))
+ return -EIO;
+ mii_cfg.reset = 0;
+ if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_CONFIG(0),
+ &mii_cfg, 4))
+ return -EIO;
+
+ *(netxen_crbword_t *) & address = 0;
+ address.reg_addr = reg;
+ address.phy_addr = phy;
+ if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_ADDR(0),
+ &address, 4))
+ return -EIO;
+ *(netxen_crbword_t *) & command = 0; /* turn off any prior
activity */
+ if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0),
+ &command, 4))
+ return -EIO;
+ /* send read command */
+ command.read_cycle = 1;
+ if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0),
+ &command, 4))
+ return -EIO;
+
+ *(netxen_crbword_t *) & status = 0;
+ do {
+ if (netxen_nic_hw_read_wx(adapter,
+ NETXEN_NIU_GB_MII_MGMT_INDICATE(0),
+ &status, 4))
+ return -EIO;
+ timeout++;
+ } while ((status.busy || status.notvalid)
+ && (timeout++ < NETXEN_NIU_PHY_WAITMAX));
+
+ if (timeout < NETXEN_NIU_PHY_WAITMAX) {
+ if (netxen_nic_hw_read_wx(adapter,
+ NETXEN_NIU_GB_MII_MGMT_STATUS(0),
+ readval, 4))
+ return -EIO;
+ result = 0;
+ } else
+ result = -1;
+
+ if (restore)
+ if (netxen_nic_hw_write_wx(adapter,
+ NETXEN_NIU_GB_MAC_CONFIG_0(0),
+ &mac_cfg0, 4))
+ return -EIO;
+
+ return result;
+}
+
+/**
+ * netxen_niu_gbe_phy_write - write a register to the GbE PHY via
+ * mii management interface.
+ *
+ * Note: The MII management interface goes through port 0.
+ * Individual phys are addressed as follows:
+ * @param phy [15:8] phy id
+ * @param reg [7:0] register number
+ *
+ * @returns 0 on success
+ * -1 on error
+ *
+ **/
+long netxen_niu_gbe_phy_write(struct netxen_adapter *adapter,
+ long phy, long reg, netxen_crbword_t val)
+{
+ long timeout = 0;
+ long result = 0;
+ long restore = 0;
+ struct netxen_niu_gb_mii_mgmt_address address;
+ struct netxen_niu_gb_mii_mgmt_command command;
+ struct netxen_niu_gb_mii_mgmt_indicators status;
+ struct netxen_niu_gb_mac_config_0_t mac_cfg0;
+
+ /* MII mgmt all goes through port 0 MAC interface, so it cannot be in
reset */
+ if (netxen_nic_hw_read_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(0),
+ &mac_cfg0, 4))
+ return -EIO;
+ if (mac_cfg0.soft_reset) {
+ struct netxen_niu_gb_mac_config_0_t temp;
+ *(netxen_crbword_t *) & temp = 0;
+ temp.tx_reset_pb = 1;
+ temp.rx_reset_pb = 1;
+ temp.tx_reset_mac = 1;
+ temp.rx_reset_mac = 1;
+ if (netxen_nic_hw_write_wx(adapter,
+ NETXEN_NIU_GB_MAC_CONFIG_0(0),
+ &temp, 4))
+ return -EIO;
+ restore = 1;
+ }
+
+ *(netxen_crbword_t *) & command = 0; /* turn off any prior
activity */
+ if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_COMMAND(0),
+ &command, 4))
+ return -EIO;
+
+ *(netxen_crbword_t *) & address = 0;
+ address.reg_addr = reg;
+ address.phy_addr = phy;
+ if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_ADDR(0),
+ &address, 4))
+ return -EIO;
+
+ if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_CTRL(0),
+ &val, 4))
+ return -EIO;
+
+ *(netxen_crbword_t *) & status = 0;
+ do {
+ if (netxen_nic_hw_read_wx(adapter,
+ NETXEN_NIU_GB_MII_MGMT_INDICATE(0),
+ &status, 4))
+ return -EIO;
+ timeout++;
+ } while ((status.busy) && (timeout++ < NETXEN_NIU_PHY_WAITMAX));
+
+ if (timeout < NETXEN_NIU_PHY_WAITMAX)
+ result = 0;
+ else
+ result = -EIO;
+
+ /* restore the state of port 0 MAC in case we tampered with it */
+ if (restore)
+ if (netxen_nic_hw_write_wx(adapter,
+ NETXEN_NIU_GB_MAC_CONFIG_0(0),
+ &mac_cfg0, 4))
+ return -EIO;
+
+ return result;
+}
+
+long netxen_niu_gbe_enable_phy_interrupts(struct netxen_adapter *adapter,
+ long port)
+{
+ long result = 0;
+ struct netxen_niu_phy_interrupt enable;
+ *(netxen_crbword_t *) & enable = 0;
+ enable.link_status_changed = 1;
+ enable.autoneg_completed = 1;
+ enable.speed_changed = 1;
+
+ if (0 !=
+ netxen_niu_gbe_phy_write(adapter, port,
+ NETXEN_NIU_GB_MII_MGMT_ADDR_INT_ENABLE,
+ *(netxen_crbword_t *) & enable))
+ result = -EIO;
+
+ return result;
+}
+
+long netxen_niu_gbe_disable_phy_interrupts(struct netxen_adapter *adapter,
+ long port)
+{
+ long result = 0;
+ if (0 !=
+ netxen_niu_gbe_phy_write(adapter, port,
+ NETXEN_NIU_GB_MII_MGMT_ADDR_INT_ENABLE, 0))
+ result = -EIO;
+
+ return result;
+}
+
+long netxen_niu_gbe_clear_phy_interrupts(struct netxen_adapter *adapter,
+ long port)
+{
+ long result = 0;
+ if (0 !=
+ netxen_niu_gbe_phy_write(adapter, port,
+ NETXEN_NIU_GB_MII_MGMT_ADDR_INT_STATUS,
+ -EIO))
+ result = -EIO;
+
+ return result;
+}
+
+/**
+ * netxen_niu_gbe_set_mii_mode- Set 10/100 Mbit Mode for GbE MAC
+ *
+ **/
+void netxen_niu_gbe_set_mii_mode(struct netxen_adapter *adapter,
+ long port, long enable)
+{
+ netxen_crb_writelit_adapter(adapter, NETXEN_NIU_MODE, 0x2);
+ netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
+ 0x80000000);
+ netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
+ 0x0000f0025);
+ netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB_MAC_CONFIG_1(port),
+ 0xf1ff);
+ netxen_crb_writelit_adapter(adapter,
+ NETXEN_NIU_GB0_GMII_MODE + (port << 3), 0);
+ netxen_crb_writelit_adapter(adapter,
+ NETXEN_NIU_GB0_MII_MODE + (port << 3), 1);
+ netxen_crb_writelit_adapter(adapter,
+ (NETXEN_NIU_GB0_HALF_DUPLEX + port * 4), 0);
+ netxen_crb_writelit_adapter(adapter,
+ NETXEN_NIU_GB_MII_MGMT_CONFIG(port), 0x7);
+
+ if (enable) {
+ /*
+ * Do NOT enable flow control until a suitable solution for
+ * shutting down pause frames is found.
+ */
+ netxen_crb_writelit_adapter(adapter,
+ NETXEN_NIU_GB_MAC_CONFIG_0(port),
+ 0x5);
+ }
+
+ if (netxen_niu_gbe_enable_phy_interrupts(adapter, port))
+ printk(KERN_ERR PFX "ERROR enabling PHY interrupts\n");
+ if (netxen_niu_gbe_clear_phy_interrupts(adapter, port))
+ printk(KERN_ERR PFX "ERROR clearing PHY interrupts\n");
+}
+
+/**
+ * netxen_niu_gbe_set_gmii_mode- Set GbE Mode for GbE MAC
+ **/
+void netxen_niu_gbe_set_gmii_mode(struct netxen_adapter *adapter,
+ long port, long enable)
+{
+ netxen_crb_writelit_adapter(adapter, NETXEN_NIU_MODE, 0x2);
+ netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
+ 0x80000000);
+ netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
+ 0x0000f0025);
+ netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB_MAC_CONFIG_1(port),
+ 0xf2ff);
+ netxen_crb_writelit_adapter(adapter,
+ NETXEN_NIU_GB0_MII_MODE + (port << 3), 0);
+ netxen_crb_writelit_adapter(adapter,
+ NETXEN_NIU_GB0_GMII_MODE + (port << 3), 1);
+ netxen_crb_writelit_adapter(adapter,
+ (NETXEN_NIU_GB0_HALF_DUPLEX + port * 4), 0);
+ netxen_crb_writelit_adapter(adapter,
+ NETXEN_NIU_GB_MII_MGMT_CONFIG(port), 0x7);
+
+ if (enable) {
+ /*
+ * Do NOT enable flow control until a suitable solution for
+ * shutting down pause frames is found.
+ */
+ netxen_crb_writelit_adapter(adapter,
+ NETXEN_NIU_GB_MAC_CONFIG_0(port),
+ 0x5);
+ }
+
+ if (netxen_niu_gbe_enable_phy_interrupts(adapter, port))
+ printk(KERN_ERR PFX "ERROR enabling PHY interrupts\n");
+ if (netxen_niu_gbe_clear_phy_interrupts(adapter, port))
+ printk(KERN_ERR PFX "ERROR clearing PHY interrupts\n");
+}
+
+long netxen_niu_gbe_init_port(struct netxen_adapter *adapter, long port)
+{
+ long result = 0;
+ struct netxen_niu_phy_status status;
+
+ if (0 ==
+ netxen_niu_gbe_phy_read(adapter, port,
+ NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS,
+ (netxen_crbword_t *) & status)) {
+ if (status.link) {
+ if (status.speed == 2) {
+ netxen_niu_gbe_set_gmii_mode(adapter, port, 1);
+ } else if ((status.speed == 1) || (status.speed == 0)) {
+ netxen_niu_gbe_set_mii_mode(adapter, port, 1);
+ } else {
+ result = -1;
+ }
+
+ } else {
+ /* We don't have link. Cable must be unconnected. */
+ /* Enable phy interrupts so we take action when plugged
in */
+ netxen_crb_writelit_adapter(adapter,
+ NETXEN_NIU_GB_MAC_CONFIG_0
+ (port), 0x80000000);
+ netxen_crb_writelit_adapter(adapter,
+ NETXEN_NIU_GB_MAC_CONFIG_0
+ (port), 0x0000f0025);
+ if (netxen_niu_gbe_clear_phy_interrupts(adapter, port))
+ printk(KERN_ERR PFX
+ "ERROR clearing PHY interrupts\n");
+ if (netxen_niu_gbe_enable_phy_interrupts(adapter, port))
+ printk(KERN_ERR PFX
+ "ERROR enabling PHY interrupts\n");
+ if (netxen_niu_gbe_clear_phy_interrupts(adapter, port))
+ printk(KERN_ERR PFX
+ "ERROR clearing PHY interrupts\n");
+ result = -1;
+ }
+ } else {
+ result = -EIO;
+ }
+ return result;
+}
+
+/**
+ * netxen_niu_gbe_handle_phy_interrupt - Handles GbE PHY interrupts
+ * @param enable 0 means don't enable the port
+ * 1 means enable (or re-enable) the port
+ **/
+long netxen_niu_gbe_handle_phy_interrupt(struct netxen_adapter *adapter,
+ long port, long enable)
+{
+ long result = 0;
+ struct netxen_niu_phy_interrupt int_src;
+
+ printk(KERN_INFO PFX "NETXEN: Handling PHY interrupt on port %d"
+ " (device enable = %d)\n", (int)port, (int)enable);
+
+ /* The read of the PHY INT status will clear the pending interrupt
status */
+ if (netxen_niu_gbe_phy_read(adapter, port,
+ NETXEN_NIU_GB_MII_MGMT_ADDR_INT_STATUS,
+ (netxen_crbword_t *) & int_src) != 0)
+ result = -EINVAL;
+ else {
+ printk(KERN_INFO PFX "PHY Interrupt source = 0x%x \n",
+ *(u32 *) & int_src);
+ if (int_src.jabber)
+ printk(KERN_INFO PFX "jabber Interrupt ");
+ if (int_src.polarity_changed)
+ printk(KERN_INFO PFX "polarity changed ");
+ if (int_src.energy_detect)
+ printk(KERN_INFO PFX "energy detect \n");
+ if (int_src.downshift)
+ printk(KERN_INFO PFX "downshift \n");
+ if (int_src.mdi_xover_changed)
+ printk(KERN_INFO PFX "mdi_xover_changed ");
+ if (int_src.fifo_over_underflow)
+ printk(KERN_INFO PFX "fifo_over_underflow ");
+ if (int_src.false_carrier)
+ printk(KERN_INFO PFX "false_carrier ");
+ if (int_src.symbol_error)
+ printk(KERN_INFO PFX "symbol_error ");
+ if (int_src.autoneg_completed)
+ printk(KERN_INFO PFX "autoneg_completed ");
+ if (int_src.page_received)
+ printk(KERN_INFO PFX "page_received ");
+ if (int_src.duplex_changed)
+ printk(KERN_INFO PFX "duplex_changed ");
+ if (int_src.autoneg_error)
+ printk(KERN_INFO PFX "autoneg_error ");
+ if ((int_src.speed_changed) || (int_src.link_status_changed)) {
+ struct netxen_niu_phy_status status;
+
+ printk(KERN_INFO PFX
+ "speed_changed or link status changed");
+ if (netxen_niu_gbe_phy_read
+ (adapter, port,
+ NETXEN_NIU_GB_MII_MGMT_ADDR_PHY_STATUS,
+ (netxen_crbword_t *) & status) == 0) {
+ if (status.speed == 2) {
+ printk
+ (KERN_INFO PFX "Link speed changed"
+ " to 1000 Mbps\n");
+ netxen_niu_gbe_set_gmii_mode(adapter,
+ port,
+ enable);
+ } else if (status.speed == 1) {
+ printk
+ (KERN_INFO PFX "Link speed changed"
+ " to 100 Mbps\n");
+ netxen_niu_gbe_set_mii_mode(adapter,
+ port,
+ enable);
+ } else if (status.speed == 0) {
+ printk
+ (KERN_INFO PFX "Link speed changed"
+ " to 10 Mbps\n");
+ netxen_niu_gbe_set_mii_mode(adapter,
+ port,
+ enable);
+ } else {
+ printk(KERN_ERR PFX "ERROR reading"
+ "PHY status. Illegal speed.\n");
+ result = -1;
+ }
+ } else {
+ printk(KERN_ERR PFX
+ "ERROR reading PHY status.\n");
+ result = -1;
+ }
+
+ }
+ printk(KERN_INFO "\n");
+ }
+ return result;
+}
+
+/**
+ * Return the current station MAC address.
+ * Note that the passed-in value must already be in network byte order.
+ **/
+int netxen_niu_macaddr_get(struct netxen_adapter *adapter,
+ int phy, netxen_ethernet_macaddr_t * addr)
+{
+ u64 result = 0;
+ struct netxen_niu_gb_station_address_high stationhigh;
+ struct netxen_niu_gb_station_address_low stationlow;
+
+ if (addr == NULL)
+ return -EINVAL;
+ if ((phy < 0) || (phy > 3))
+ return -EINVAL;
+
+ if (netxen_nic_hw_read_wx(adapter, NETXEN_NIU_GB_STATION_ADDR_0(phy),
+ &stationhigh, 4))
+ return -EIO;
+ if (netxen_nic_hw_read_wx(adapter, NETXEN_NIU_GB_STATION_ADDR_1(phy),
+ &stationlow, 4))
+ return -EIO;
+
+ result = (u64) stationlow.address;
+ result |= (u64) stationhigh.address << 16;
+ memcpy(*addr, &result, sizeof(netxen_ethernet_macaddr_t));
+
+ return 0;
+}
+
+/**
+ * Set the station MAC address.
+ * Note that the passed-in value must already be in network byte order.
+ **/
+int netxen_niu_macaddr_set(struct netxen_adapter *adapter, int phy,
+ netxen_ethernet_macaddr_t addr)
+{
+ netxen_crbword_t temp = 0;
+
+ if ((phy < 0) || (phy > 3))
+ return -EINVAL;
+
+ memcpy(&temp, addr, 2);
+ temp <<= 16;
+ if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_STATION_ADDR_1(phy),
+ &temp, 4))
+ return -EIO;
+
+ temp = 0;
+
+ memcpy(&temp, ((u8 *) addr) + 2, sizeof(netxen_crbword_t));
+ if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_STATION_ADDR_0(phy),
+ &temp, 4))
+ return -2;
+
+ return 0;
+}
+
+/* Enable a GbE interface */
+long netxen_niu_enable_gbe_port(struct netxen_adapter *adapter,
+ long port, netxen_niu_gbe_ifmode_t mode)
+{
+ struct netxen_niu_gb_mac_config_0_t mac_cfg0;
+ struct netxen_niu_gb_mac_config_1_t mac_cfg1;
+ struct netxen_niu_gb_mii_mgmt_config mii_cfg;
+
+ if ((port < 0) || (port > NETXEN_NIU_MAX_GBE_PORTS))
+ return -EINVAL;
+
+ *(netxen_crbword_t *) & mac_cfg0 = 0;
+ mac_cfg0.soft_reset = 1;
+ if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
+ &mac_cfg0, 4))
+ return -EIO;
+ *(netxen_crbword_t *) & mac_cfg0 = 0;
+ mac_cfg0.tx_enable = 1;
+ mac_cfg0.rx_enable = 1;
+ mac_cfg0.rx_flowctl = 0;
+ mac_cfg0.tx_reset_pb = 1;
+ mac_cfg0.rx_reset_pb = 1;
+ mac_cfg0.tx_reset_mac = 1;
+ mac_cfg0.rx_reset_mac = 1;
+
+ if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
+ &mac_cfg0, 4))
+ return -EIO;
+ *(netxen_crbword_t *) & mac_cfg1 = 0;
+ mac_cfg1.preamblelen = 0xf;
+ mac_cfg1.duplex = 1;
+ mac_cfg1.crc_enable = 1;
+ mac_cfg1.padshort = 1;
+ mac_cfg1.checklength = 1;
+ mac_cfg1.hugeframes = 1;
+
+ if (mode == NETXEN_NIU_10_100_MB) {
+ mac_cfg1.intfmode = 1;
+ if (netxen_nic_hw_write_wx(adapter,
+ NETXEN_NIU_GB_MAC_CONFIG_1(port),
+ &mac_cfg1, 4))
+ return -EIO;
+
+ /* set mii mode */
+ netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB0_GMII_MODE +
+ (port << 3), 0);
+ netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB0_MII_MODE +
+ (port << 3), 1);
+
+ } else if (mode == NETXEN_NIU_1000_MB) {
+ mac_cfg1.intfmode = 2;
+ if (netxen_nic_hw_write_wx(adapter,
+ NETXEN_NIU_GB_MAC_CONFIG_1(port),
+ &mac_cfg1, 4))
+ return -EIO;
+ /* set gmii mode */
+ netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB0_MII_MODE +
+ (port << 3), 0);
+ netxen_crb_writelit_adapter(adapter, NETXEN_NIU_GB0_GMII_MODE +
+ (port << 3), 1);
+ }
+ *(netxen_crbword_t *) & mii_cfg = 0;
+ mii_cfg.clockselect = 7;
+ if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MII_MGMT_CONFIG(port),
+ &mii_cfg, 4))
+ return -EIO;
+
+ *(netxen_crbword_t *) & mac_cfg0 = 0;
+ mac_cfg0.tx_enable = 1;
+ mac_cfg0.rx_enable = 1;
+ mac_cfg0.tx_flowctl = 0;
+ mac_cfg0.rx_flowctl = 0;
+ if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
+ &mac_cfg0, 4))
+ return -EIO;
+ return 0;
+}
+
+/* Disable a GbE interface */
+long netxen_niu_disable_gbe_port(struct netxen_adapter *adapter, long port)
+{
+ struct netxen_niu_gb_mac_config_0_t mac_cfg0;
+
+ if ((port < 0) || (port > NETXEN_NIU_MAX_GBE_PORTS))
+ return -EINVAL;
+
+ *(netxen_crbword_t *) & mac_cfg0 = 0;
+ mac_cfg0.soft_reset = 1;
+ if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_MAC_CONFIG_0(port),
+ &mac_cfg0, 4))
+ return -EIO;
+ return 0;
+}
+
+/* Disable an XG interface */
+long netxen_niu_disable_xg_port(struct netxen_adapter *adapter, long port)
+{
+ struct netxen_niu_xg_mac_config_0_t mac_cfg;
+
+ if (port != 0)
+ return -EINVAL;
+
+ *(netxen_crbword_t *) & mac_cfg = 0;
+ mac_cfg.soft_reset = 1;
+ if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_XGE_CONFIG_0,
+ &mac_cfg, 4))
+ return -EIO;
+ return 0;
+}
+
+/* Set promiscuous mode for a GbE interface */
+long netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter, long port,
+ netxen_niu_prom_mode_t mode)
+{
+ struct netxen_niu_gb_drop_crc reg;
+ long data;
+
+ if ((port < 0) || (port > NETXEN_NIU_MAX_GBE_PORTS))
+ return -EINVAL;
+
+ if (mode == NETXEN_NIU_PROMISCOUS_MODE)
+ data = 0;
+ else
+ data = 1;
+
+ /* save previous contents */
+ if (netxen_nic_hw_read_wx(adapter, NETXEN_NIU_GB_DROP_WRONGADDR,
+ ®, 4))
+ return -EIO;
+ switch (port) {
+ case 0:
+ reg.drop_gb0 = data;
+ break;
+ case 1:
+ reg.drop_gb0 = data;
+ break;
+ case 2:
+ reg.drop_gb0 = data;
+ break;
+ case 3:
+ reg.drop_gb0 = data;
+ break;
+ default:
+ return -EIO;
+ }
+ if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_GB_DROP_WRONGADDR,
+ ®, 4))
+ return -EIO;
+ return 0;
+}
+
+/**
+ * Set the MAC address for an XG port
+ * Note that the passed-in value must already be in network byte order.
+ **/
+int netxen_niu_xg_macaddr_set(struct netxen_adapter *adapter, int phy,
+ netxen_ethernet_macaddr_t addr)
+{
+ netxen_crbword_t temp = 0;
+
+ if ((phy < 0) || (phy > 3))
+ return -EINVAL;
+
+ memcpy(&temp, addr, 2);
+ temp <<= 16;
+ if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_XGE_STATION_ADDR_0_1,
+ &temp, 4))
+ return -EIO;
+
+ temp = 0;
+
+ memcpy(&temp, ((u8 *) addr) + 2, sizeof(netxen_crbword_t));
+ if (netxen_nic_hw_write_wx(adapter, NETXEN_NIU_XGE_STATION_ADDR_0_HI,
+ &temp, 4))
+ return -EIO;
+
+ return 0;
+}
+
+/**
+ * Return the current station MAC address.
+ * Note that the passed-in value must already be in network byte order.
+ **/
+int netxen_niu_xg_macaddr_get(struct netxen_adapter *adapter, int phy,
+ netxen_ethernet_macaddr_t * addr)
+{
+ netxen_crbword_t stationhigh;
+ netxen_crbword_t stationlow;
+ u64 result;
+
+ if (addr == NULL)
+ return -EINVAL;
+ if (phy != 0)
+ return -EINVAL;
+
+ if (netxen_nic_hw_read_wx(adapter, NETXEN_NIU_XGE_STATION_ADDR_0_HI,
+ &stationhigh, 4))
+ return -EIO;
+ if (netxen_nic_hw_read_wx(adapter, NETXEN_NIU_XGE_STATION_ADDR_0_1,
+ &stationlow, 4))
+ return -EIO;
+
+ result = ((u64) stationlow) >> 16;
+ result |= (u64) stationhigh << 16;
+ memcpy(*addr, &result, sizeof(netxen_ethernet_macaddr_t));
+
+ return 0;
+}
+
+long netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter,
+ long port, netxen_niu_prom_mode_t mode)
+{
+ long reg;
+
+ if ((port < 0) || (port > NETXEN_NIU_MAX_GBE_PORTS))
+ return -EINVAL;
+
+ if (netxen_nic_hw_read_wx(adapter, NETXEN_NIU_XGE_CONFIG_1, ®, 4))
+ return -EIO;
+ if (mode == NETXEN_NIU_PROMISCOUS_MODE)
+ reg = (reg | 0x2000UL);
+ else
+ reg = (reg & ~0x2000UL);
+
+ netxen_crb_writelit_adapter(adapter, NETXEN_NIU_XGE_CONFIG_1, reg);
+
+ return 0;
+}
diff -Naru linux-2.6.16.20.orig/drivers/net/netxen/netxen_nic_phan_reg.h
linux-2.6.16.20/drivers/net/netxen/netxen_nic_phan_reg.h
--- linux-2.6.16.20.orig/drivers/net/netxen/netxen_nic_phan_reg.h
1969-12-31 16:00:00.000000000 -0800
+++ linux-2.6.16.20/drivers/net/netxen/netxen_nic_phan_reg.h 2006-06-06
06:58:11.000000000 -0700
@@ -0,0 +1,293 @@
+/*
+ * Copyright (C) 2003 - 2006 NetXen, Inc.
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston,
+ * MA 02111-1307, USA.
+ *
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.
+ *
+ * Contact Information:
+ * [EMAIL PROTECTED]
+ * NetXen,
+ * 3965 Freedom Circle, Fourth floor,
+ * Santa Clara, CA 95054
+ */
+
+#ifndef __NIC_PHAN_REG_H_
+#define __NIC_PHAN_REG_H_
+
+/**
+ * CRB Registers or queue message done only at initialization time....
+ **/
+
+/**
+ * The following 2 are the base adresses for the CRB registers and their
+ * offsets will be added to get addresses for the index addresses.......
+ **/
+#define NIC_CRB_BASE_PORT1 NETXEN_CAM_RAM(0x200)
+#define NIC_CRB_BASE_PORT2 NETXEN_CAM_RAM(0x250)
+
+#define NETXEN_NIC_REG(X) (NIC_CRB_BASE_PORT1+(X))
+
+/**
+ * CrbPortPhanCntrHi/Lo is used to pass the address of HostPhantomIndex address
+ * which can be read by the Phantom host to get producer/consumer indexes from
+ * Phantom/Casper. If it is not HOST_SHARED_MEMORY, then the following
+ * registers will be used for the addresses of the ring's shared memory
+ * on the Phantom.
+ **/
+
+#define CRB_PHAN_CNTRL_LO_OFFSET NETXEN_NIC_REG(0x00)
+#define CRB_PHAN_CNTRL_HI_OFFSET NETXEN_NIC_REG(0x04)
+
+/* point to the indexes */
+#define CRB_CMD_PRODUCER_OFFSET NETXEN_NIC_REG(0x08)
+#define CRB_CMD_CONSUMER_OFFSET NETXEN_NIC_REG(0x0c)
+
+/* address of command descriptors in the host memory */
+#define CRB_HOST_CMD_ADDR_HI NETXEN_NIC_REG(0x30)
+#define CRB_HOST_CMD_ADDR_LO NETXEN_NIC_REG(0x34)
+
+/* The following 4 CRB registers are for doing performance coal */
+#define CRB_CMD_INTR_LOOP NETXEN_NIC_REG(0x38)
+#define CRB_CMD_DMA_LOOP NETXEN_NIC_REG(0x3c)
+#define CRB_RCV_INTR_LOOP NETXEN_NIC_REG(0x40)
+#define CRB_RCV_DMA_LOOP NETXEN_NIC_REG(0x44)
+
+/* Needed by the host to find out the state of Phantom's initialization */
+#define CRB_ENABLE_TX_INTR NETXEN_NIC_REG(0x4c)
+#define CRB_CMDPEG_STATE NETXEN_NIC_REG(0x50)
+#define CRB_CMDPEG_CMDRING NETXEN_NIC_REG(0x54)
+
+/* Interrupt coalescing parameters */
+#define CRB_GLOBAL_INT_COAL NETXEN_NIC_REG(0x80)
+#define CRB_INT_COAL_MODE NETXEN_NIC_REG(0x84)
+#define CRB_MAX_RCV_BUFS NETXEN_NIC_REG(0x88)
+#define CRB_TX_INT_THRESHOLD NETXEN_NIC_REG(0x8c)
+#define CRB_RX_PKT_TIMER NETXEN_NIC_REG(0x90)
+#define CRB_TX_PKT_TIMER NETXEN_NIC_REG(0x94)
+#define CRB_RX_PKT_CNT NETXEN_NIC_REG(0x98)
+#define CRB_RX_TMR_CNT NETXEN_NIC_REG(0x9c)
+
+/* Register for communicating XG link status */
+#define CRB_XG_STATE NETXEN_NIC_REG(0xa0)
+
+/* Debug registers for controlling NIC pkt gen agent */
+#define CRB_AGENT_GO NETXEN_NIC_REG(0xb0)
+#define CRB_AGENT_TX_SIZE NETXEN_NIC_REG(0xb4)
+#define CRB_AGENT_TX_TYPE NETXEN_NIC_REG(0xb8)
+#define CRB_AGENT_TX_ADDR NETXEN_NIC_REG(0xbc)
+#define CRB_AGENT_TX_MSS NETXEN_NIC_REG(0xc0)
+
+/* Debug registers for observing NIC performance */
+#define CRB_TX_STATE NETXEN_NIC_REG(0xd0)
+#define CRB_TX_COUNT NETXEN_NIC_REG(0xd4)
+#define CRB_RX_STATE NETXEN_NIC_REG(0xd8)
+#define CRB_CMD_RING_SIZE NETXEN_NIC_REG(0xe0)
+#define CRB_CTX_ADDR_REG NETXEN_NIC_REG(0xd0)
+#define CRB_CTX_SIGNATURE_REG NETXEN_NIC_REG(0xd4)
+
+#define NETXEN_CMD_PRODUCER_DB_PAGE(ctx) ((ctx) * 4)
+#define NETXEN_RCV_STATUS_CONSUMER_DB_PAGE(ctx) (1 + ((ctx) * 4))
+#define NETXEN_RCV_PRODUCER_DB_PAGE(ctx,ring) (2 + (ring) + ((ctx) * 4))
+
+/* CRB registers per Rcv Descriptor ring */
+struct netxen_rcv_desc_crb {
+ u32 crb_rcv_producer_offset __attribute__ ((aligned(512)));
+ u32 crb_rcv_consumer_offset;
+ u32 crb_globalrcv_ring;
+ u32 crb_rcv_ring_size;
+};
+
+/*
+ * CRB registers used by the receive peg logic. One instance of these
+ * needs to be instantiated per instance of the receive peg.
+ */
+
+struct netxen_recv_crb {
+ struct netxen_rcv_desc_crb rcv_desc_crb[NUM_RCV_DESC_RINGS];
+ u32 crb_rcvstatus_ring;
+ u32 crb_rcv_status_producer;
+ u32 crb_rcv_status_consumer;
+ u32 crb_rcvpeg_state;
+ u32 crb_status_ring_size;
+};
+
+#if defined(DEFINE_GLOBAL_RECV_CRB)
+struct netxen_recv_crb recv_crb_registers[] = {
+ /*
+ * Instance 0.
+ */
+ {
+ /* rcv_desc_crb: */
+ {
+ {
+ /* crb_rcv_producer_offset: */
+ NETXEN_NIC_REG(0x18),
+ /* crb_rcv_consumer_offset: */
+ NETXEN_NIC_REG(0x1c),
+ /* crb_gloablrcv_ring: */
+ NETXEN_NIC_REG(0x20),
+ /* crb_rcv_ring_size: */
+ NETXEN_NIC_REG(0xe4),
+ },
+ /* Jumbo frames */
+ {
+ /* crb_rcv_producer_offset: */
+ NETXEN_NIC_REG(0x100),
+ /* crb_rcv_consumer_offset: */
+ NETXEN_NIC_REG(0x104),
+ /* crb_gloablrcv_ring: */
+ NETXEN_NIC_REG(0x108),
+ /* crb_rcv_ring_size: */
+ NETXEN_NIC_REG(0xe8),
+ }
+ },
+ /* crb_rcvstatus_ring: */
+ NETXEN_NIC_REG(0x24),
+ /* crb_rcv_status_producer: */
+ NETXEN_NIC_REG(0x28),
+ /* crb_rcv_status_consumer: */
+ NETXEN_NIC_REG(0x2c),
+ /* crb_rcvpeg_state: */
+ NETXEN_NIC_REG(0x48),
+ /* crb_status_ring_size: */
+ NETXEN_NIC_REG(0xec),
+ },
+ /*
+ * Instance 1,
+ */
+ {
+ /* rcv_desc_crb: */
+ {
+ {
+ /* crb_rcv_producer_offset: */
+ NETXEN_NIC_REG(0x80),
+ /* crb_rcv_consumer_offset: */
+ NETXEN_NIC_REG(0x84),
+ /* crb_globalrcv_ring: */
+ NETXEN_NIC_REG(0x88),
+ /* crb_rcv_ring_size: */
+ NETXEN_NIC_REG(0xf0),
+ },
+ /* Jumbo frames */
+ {
+ /* crb_rcv_producer_offset: */
+ NETXEN_NIC_REG(0x10C),
+ /* crb_rcv_consumer_offset: */
+ NETXEN_NIC_REG(0x110),
+ /* crb_globalrcv_ring: */
+ NETXEN_NIC_REG(0x114),
+ /* crb_rcv_ring_size: */
+ NETXEN_NIC_REG(0xf4),
+ }
+ },
+ /* crb_rcvstatus_ring: */
+ NETXEN_NIC_REG(0x8c),
+ /* crb_rcv_status_producer: */
+ NETXEN_NIC_REG(0x90),
+ /* crb_rcv_status_consumer: */
+ NETXEN_NIC_REG(0x94),
+ /* crb_rcvpeg_state: */
+ NETXEN_NIC_REG(0x98),
+ /* crb_status_ring_size: */
+ NETXEN_NIC_REG(0xf8),
+ },
+ /*
+ * Instance 2.
+ */
+ {
+ /* rcv_desc_crb: */
+ {
+ {
+ /* crb_rcv_producer_offset: */
+ NETXEN_NIC_REG(0x18),
+ /* crb_rcv_consumer_offset: */
+ NETXEN_NIC_REG(0x1c),
+ /* crb_globalrcv_ring: */
+ NETXEN_NIC_REG(0x20),
+ /* crb_rcv_ring_size: */
+ NETXEN_NIC_REG(0xe4),
+ },
+ /* Jumbo frames */
+ {
+ /* crb_rcv_producer_offset: */
+ NETXEN_NIC_REG(0x100),
+ /* crb_rcv_consumer_offset: */
+ NETXEN_NIC_REG(0x104),
+ /* crb_globalrcv_ring: */
+ NETXEN_NIC_REG(0x108),
+ /* crb_rcv_ring_size: */
+ NETXEN_NIC_REG(0xe8),
+ }
+ },
+ /* crb_rcvstatus_ring: */
+ NETXEN_NIC_REG(0x24),
+ /* crb_rcv_status_producer: */
+ NETXEN_NIC_REG(0x28),
+ /* crb_rcv_status_consumer: */
+ NETXEN_NIC_REG(0x2c),
+ /* crb_rcvpeg_state: */
+ NETXEN_NIC_REG(0x48),
+ /* crb_status_ring_size: */
+ NETXEN_NIC_REG(0xec),
+ },
+ /*
+ * Instance 3,
+ */
+ {
+ /* rcv_desc_crb: */
+ {
+ {
+ /* crb_rcv_producer_offset: */
+ NETXEN_NIC_REG(0x80),
+ /* crb_rcv_consumer_offset: */
+ NETXEN_NIC_REG(0x84),
+ /* crb_globalrcv_ring: */
+ NETXEN_NIC_REG(0x88),
+ /* crb_rcv_ring_size: */
+ NETXEN_NIC_REG(0xf0),
+ },
+ /* Jumbo frames */
+ {
+ /* crb_rcv_producer_offset: */
+ NETXEN_NIC_REG(0x10C),
+ /* crb_rcv_consumer_offset: */
+ NETXEN_NIC_REG(0x110),
+ /* crb_globalrcv_ring: */
+ NETXEN_NIC_REG(0x114),
+ /* crb_rcv_ring_size: */
+ NETXEN_NIC_REG(0xf4),
+ }
+ },
+ /* crb_rcvstatus_ring: */
+ NETXEN_NIC_REG(0x8c),
+ /* crb_rcv_status_producer: */
+ NETXEN_NIC_REG(0x90),
+ /* crb_rcv_status_consumer: */
+ NETXEN_NIC_REG(0x94),
+ /* crb_rcvpeg_state */
+ NETXEN_NIC_REG(0x98),
+ /* crb_status_ring_size: */
+ NETXEN_NIC_REG(0xf8),
+ },
+};
+#else
+extern struct netxen_recv_crb recv_crb_registers[];
+#endif /* DEFINE_GLOBAL_RECEIVE_CRB */
+
+#endif /* __NIC_PHAN_REG_H_ */
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
