It works fine here (x86 so far) but I would welcome more testers.
The patch applies against 2.6.17-rcX.
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 0ad3310..4208d9a 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -1381,6 +1381,41 @@ static void rtl8169_netpoll(struct net_d
}
#endif
+static void __rtl8169_set_mac_addr(struct net_device *dev, void __iomem
*ioaddr)
+{
+ unsigned int i, j;
+
+ RTL_W8(Cfg9346, Cfg9346_Unlock);
+ for (i = 0; i < 2; i++) {
+ __le32 l = 0;
+
+ for (j = 0; j < 4; j++) {
+ l <<= 8;
+ l |= dev->dev_addr[4*i + j];
+ }
+ RTL_W32(MAC0 + 4*i, cpu_to_be32(l));
+ }
+ RTL_W8(Cfg9346, Cfg9346_Lock);
+}
+
+static int rtl8169_set_mac_addr(struct net_device *dev, void *p)
+{
+ struct rtl8169_private *tp = netdev_priv(dev);
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EINVAL;
+
+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+
+ if (netif_running(dev)) {
+ spin_lock_irq(&tp->lock);
+ __rtl8169_set_mac_addr(dev, tp->mmio_addr);
+ spin_unlock_irq(&tp->lock);
+ }
+ return 0;
+}
+
static void rtl8169_release_board(struct pci_dev *pdev, struct net_device *dev,
void __iomem *ioaddr)
{
@@ -1616,6 +1651,7 @@ rtl8169_init_one(struct pci_dev *pdev, c
dev->stop = rtl8169_close;
dev->tx_timeout = rtl8169_tx_timeout;
dev->set_multicast_list = rtl8169_set_rx_mode;
+ dev->set_mac_address = rtl8169_set_mac_addr;
dev->watchdog_timeo = RTL8169_TX_TIMEOUT;
dev->irq = pdev->irq;
dev->base_addr = (unsigned long) ioaddr;
@@ -1849,6 +1885,8 @@ rtl8169_hw_start(struct net_device *dev)
/* Enable all known interrupts by setting the interrupt mask. */
RTL_W16(IntrMask, rtl8169_intr_mask);
+ __rtl8169_set_mac_addr(dev, ioaddr);
+
netif_start_queue(dev);
}
-
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
