Re: [net-next v5 2/8] dpaa_eth: add support for DPAA Ethernet
From: Joe Perches Date: Fri, 04 Dec 2015 12:00:35 -0800 > On Fri, 2015-12-04 at 14:55 -0500, David Miller wrote: >> From: Madalin Bucur >> Date: Thu, 3 Dec 2015 15:49:43 +0200 >> >> > @@ -0,0 +1,22 @@ >> > +menuconfig FSL_DPAA_ETH >> > + tristate "DPAA Ethernet" >> > + depends on FSL_SOC && FSL_BMAN && FSL_QMAN && FSL_FMAN >> > + select PHYLIB >> > + select FSL_FMAN_MAC >> >> I do not see the FSL_FMAN_MAC Kconfig symbol defined anywhere in the >> tree. > > I believe this patch series is dependent on two > other patch series mentioned in the cover letter. Then this shouldn't have been submitted. The dependent series has been through a lot of changes and still needs lots of work, and is very far from being applied. Posting patches depending upon it is therefore wholly inapproprate. That time and effort should be spent putting the dependent series into proper shape. Since I see what is happening here, I am going to simply ignore all future submissions of dpaa_eth, until the dependencies are worked out properly so don't bother posting this stuff again until that happens. Thanks. -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [net-next v5 2/8] dpaa_eth: add support for DPAA Ethernet
On Fri, 2015-12-04 at 14:55 -0500, David Miller wrote: > From: Madalin Bucur > Date: Thu, 3 Dec 2015 15:49:43 +0200 > > > @@ -0,0 +1,22 @@ > > +menuconfig FSL_DPAA_ETH > > + tristate "DPAA Ethernet" > > + depends on FSL_SOC && FSL_BMAN && FSL_QMAN && FSL_FMAN > > + select PHYLIB > > + select FSL_FMAN_MAC > > I do not see the FSL_FMAN_MAC Kconfig symbol defined anywhere in the > tree. I believe this patch series is dependent on two other patch series mentioned in the cover letter. --- The latest FMan driver patches were submitted by Igal Liberman: https://patchwork.ozlabs.org/project/netdev/list/?submitter=64715&state=* The latest Q/BMan drivers were submitted by Roy Pledge: https://patchwork.ozlabs.org/project/linuxppc-dev/list/?submitter=66331&state=* -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [net-next v5 2/8] dpaa_eth: add support for DPAA Ethernet
From: Madalin Bucur Date: Thu, 3 Dec 2015 15:49:43 +0200 > @@ -0,0 +1,22 @@ > +menuconfig FSL_DPAA_ETH > + tristate "DPAA Ethernet" > + depends on FSL_SOC && FSL_BMAN && FSL_QMAN && FSL_FMAN > + select PHYLIB > + select FSL_FMAN_MAC I do not see the FSL_FMAN_MAC Kconfig symbol defined anywhere in the tree. -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
[net-next v5 2/8] dpaa_eth: add support for DPAA Ethernet
This introduces the Freescale Data Path Acceleration Architecture (DPAA) Ethernet driver (dpaa_eth) that builds upon the DPAA QMan, BMan, PAMU and FMan drivers to deliver Ethernet connectivity on the Freescale DPAA QorIQ platforms. Signed-off-by: Madalin Bucur --- drivers/net/ethernet/freescale/Kconfig |2 + drivers/net/ethernet/freescale/Makefile|1 + drivers/net/ethernet/freescale/dpaa/Kconfig| 22 + drivers/net/ethernet/freescale/dpaa/Makefile | 11 + drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 759 +++ drivers/net/ethernet/freescale/dpaa/dpaa_eth.h | 417 +++ .../net/ethernet/freescale/dpaa/dpaa_eth_common.c | 1316 .../net/ethernet/freescale/dpaa/dpaa_eth_common.h | 97 ++ drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c | 386 ++ 9 files changed, 3011 insertions(+) create mode 100644 drivers/net/ethernet/freescale/dpaa/Kconfig create mode 100644 drivers/net/ethernet/freescale/dpaa/Makefile create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth.h create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c diff --git a/drivers/net/ethernet/freescale/Kconfig b/drivers/net/ethernet/freescale/Kconfig index f3f89cc..92198be 100644 --- a/drivers/net/ethernet/freescale/Kconfig +++ b/drivers/net/ethernet/freescale/Kconfig @@ -92,4 +92,6 @@ config GIANFAR and MPC86xx family of chips, the eTSEC on LS1021A and the FEC on the 8540. +source "drivers/net/ethernet/freescale/dpaa/Kconfig" + endif # NET_VENDOR_FREESCALE diff --git a/drivers/net/ethernet/freescale/Makefile b/drivers/net/ethernet/freescale/Makefile index 4097c58..ae13dc5 100644 --- a/drivers/net/ethernet/freescale/Makefile +++ b/drivers/net/ethernet/freescale/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_FS_ENET) += fs_enet/ obj-$(CONFIG_FSL_PQ_MDIO) += fsl_pq_mdio.o obj-$(CONFIG_FSL_XGMAC_MDIO) += xgmac_mdio.o obj-$(CONFIG_GIANFAR) += gianfar_driver.o +obj-$(CONFIG_FSL_DPAA_ETH) += dpaa/ obj-$(CONFIG_PTP_1588_CLOCK_GIANFAR) += gianfar_ptp.o gianfar_driver-objs := gianfar.o \ gianfar_ethtool.o diff --git a/drivers/net/ethernet/freescale/dpaa/Kconfig b/drivers/net/ethernet/freescale/dpaa/Kconfig new file mode 100644 index 000..022d5aa --- /dev/null +++ b/drivers/net/ethernet/freescale/dpaa/Kconfig @@ -0,0 +1,22 @@ +menuconfig FSL_DPAA_ETH + tristate "DPAA Ethernet" + depends on FSL_SOC && FSL_BMAN && FSL_QMAN && FSL_FMAN + select PHYLIB + select FSL_FMAN_MAC + ---help--- + Data Path Acceleration Architecture Ethernet driver, + supporting the Freescale QorIQ chips. + Depends on Freescale Buffer Manager and Queue Manager + driver and Frame Manager Driver. + +if FSL_DPAA_ETH + +config FSL_DPAA_ETH_FRIENDLY_IF_NAME + bool "Use fmX-macY names for the DPAA interfaces" + default y + ---help--- + The DPAA Ethernet netdevices are created for each FMan port available + on a certain board. Enable this to get interface names derived from + the underlying FMan hardware for a simple identification. + +endif # FSL_DPAA_ETH diff --git a/drivers/net/ethernet/freescale/dpaa/Makefile b/drivers/net/ethernet/freescale/dpaa/Makefile new file mode 100644 index 000..3847ec7 --- /dev/null +++ b/drivers/net/ethernet/freescale/dpaa/Makefile @@ -0,0 +1,11 @@ +# +# Makefile for the Freescale DPAA Ethernet controllers +# + +# Include FMan headers +FMAN= $(srctree)/drivers/net/ethernet/freescale/fman +ccflags-y += -I$(FMAN) + +obj-$(CONFIG_FSL_DPAA_ETH) += fsl_dpa.o + +fsl_dpa-objs += dpaa_eth.o dpaa_eth_sg.o dpaa_eth_common.o diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c new file mode 100644 index 000..67f89ab --- /dev/null +++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c @@ -0,0 +1,759 @@ +/* Copyright 2008 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * ALTERNATIVELY, this softw
[net-next v5 2/8] dpaa_eth: add support for DPAA Ethernet
From: Madalin Bucur This introduces the Freescale Data Path Acceleration Architecture (DPAA) Ethernet driver (dpaa_eth) that builds upon the DPAA QMan, BMan, PAMU and FMan drivers to deliver Ethernet connectivity on the Freescale DPAA QorIQ platforms. Signed-off-by: Madalin Bucur --- drivers/net/ethernet/freescale/Kconfig |2 + drivers/net/ethernet/freescale/Makefile|1 + drivers/net/ethernet/freescale/dpaa/Kconfig| 22 + drivers/net/ethernet/freescale/dpaa/Makefile | 11 + drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 759 +++ drivers/net/ethernet/freescale/dpaa/dpaa_eth.h | 417 +++ .../net/ethernet/freescale/dpaa/dpaa_eth_common.c | 1316 .../net/ethernet/freescale/dpaa/dpaa_eth_common.h | 97 ++ drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c | 386 ++ 9 files changed, 3011 insertions(+) create mode 100644 drivers/net/ethernet/freescale/dpaa/Kconfig create mode 100644 drivers/net/ethernet/freescale/dpaa/Makefile create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth.h create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.c create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth_common.h create mode 100644 drivers/net/ethernet/freescale/dpaa/dpaa_eth_sg.c diff --git a/drivers/net/ethernet/freescale/Kconfig b/drivers/net/ethernet/freescale/Kconfig index f3f89cc..92198be 100644 --- a/drivers/net/ethernet/freescale/Kconfig +++ b/drivers/net/ethernet/freescale/Kconfig @@ -92,4 +92,6 @@ config GIANFAR and MPC86xx family of chips, the eTSEC on LS1021A and the FEC on the 8540. +source "drivers/net/ethernet/freescale/dpaa/Kconfig" + endif # NET_VENDOR_FREESCALE diff --git a/drivers/net/ethernet/freescale/Makefile b/drivers/net/ethernet/freescale/Makefile index 4097c58..ae13dc5 100644 --- a/drivers/net/ethernet/freescale/Makefile +++ b/drivers/net/ethernet/freescale/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_FS_ENET) += fs_enet/ obj-$(CONFIG_FSL_PQ_MDIO) += fsl_pq_mdio.o obj-$(CONFIG_FSL_XGMAC_MDIO) += xgmac_mdio.o obj-$(CONFIG_GIANFAR) += gianfar_driver.o +obj-$(CONFIG_FSL_DPAA_ETH) += dpaa/ obj-$(CONFIG_PTP_1588_CLOCK_GIANFAR) += gianfar_ptp.o gianfar_driver-objs := gianfar.o \ gianfar_ethtool.o diff --git a/drivers/net/ethernet/freescale/dpaa/Kconfig b/drivers/net/ethernet/freescale/dpaa/Kconfig new file mode 100644 index 000..022d5aa --- /dev/null +++ b/drivers/net/ethernet/freescale/dpaa/Kconfig @@ -0,0 +1,22 @@ +menuconfig FSL_DPAA_ETH + tristate "DPAA Ethernet" + depends on FSL_SOC && FSL_BMAN && FSL_QMAN && FSL_FMAN + select PHYLIB + select FSL_FMAN_MAC + ---help--- + Data Path Acceleration Architecture Ethernet driver, + supporting the Freescale QorIQ chips. + Depends on Freescale Buffer Manager and Queue Manager + driver and Frame Manager Driver. + +if FSL_DPAA_ETH + +config FSL_DPAA_ETH_FRIENDLY_IF_NAME + bool "Use fmX-macY names for the DPAA interfaces" + default y + ---help--- + The DPAA Ethernet netdevices are created for each FMan port available + on a certain board. Enable this to get interface names derived from + the underlying FMan hardware for a simple identification. + +endif # FSL_DPAA_ETH diff --git a/drivers/net/ethernet/freescale/dpaa/Makefile b/drivers/net/ethernet/freescale/dpaa/Makefile new file mode 100644 index 000..3847ec7 --- /dev/null +++ b/drivers/net/ethernet/freescale/dpaa/Makefile @@ -0,0 +1,11 @@ +# +# Makefile for the Freescale DPAA Ethernet controllers +# + +# Include FMan headers +FMAN= $(srctree)/drivers/net/ethernet/freescale/fman +ccflags-y += -I$(FMAN) + +obj-$(CONFIG_FSL_DPAA_ETH) += fsl_dpa.o + +fsl_dpa-objs += dpaa_eth.o dpaa_eth_sg.o dpaa_eth_common.o diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c new file mode 100644 index 000..67f89ab --- /dev/null +++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c @@ -0,0 +1,759 @@ +/* Copyright 2008 - 2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * ALT
