Re: [patch net-next 0/5] mlxsw: Offload PRIO qdisc

2018-01-12 Thread Jamal Hadi Salim

On 18-01-11 05:20 AM, Jiri Pirko wrote:

From: Jiri Pirko 

Add an offload support for PRIO qdisc for mlxsw driver.
PRIO qdisc is being offloaded by using ndo_setup_tc. It has three
commands, to set or tune the qdisc, to remove it and to get its stats.

Like RED offloading, offloading this qdisc is not enforced on the driver
and determining its offload state is done in the dump action, when the
stats are being updated.
In the driver, offloading of PRIO is supported as root qdisc only. It
supports only priorities 0-7 (the range that is used by the current static
mapping of DSCP to skb prio and by 1:1 PCP values mapping) and up to 8
bands.

Patches 1-2 offload DSCP to priority mapping in the mlxsw_sp driver.
Patch 3 adds offload support for PRIO qdisc.
Patches 4-5 Add PRIO offload support in the mlxsw_sp driver.


Strictly DSCP or 802.1p as well?

cheers,
jamal


[patch net-next 0/5] mlxsw: Offload PRIO qdisc

2018-01-11 Thread Jiri Pirko
From: Jiri Pirko 

Add an offload support for PRIO qdisc for mlxsw driver.
PRIO qdisc is being offloaded by using ndo_setup_tc. It has three
commands, to set or tune the qdisc, to remove it and to get its stats.

Like RED offloading, offloading this qdisc is not enforced on the driver
and determining its offload state is done in the dump action, when the
stats are being updated.
In the driver, offloading of PRIO is supported as root qdisc only. It
supports only priorities 0-7 (the range that is used by the current static
mapping of DSCP to skb prio and by 1:1 PCP values mapping) and up to 8
bands.

Patches 1-2 offload DSCP to priority mapping in the mlxsw_sp driver.
Patch 3 adds offload support for PRIO qdisc.
Patches 4-5 Add PRIO offload support in the mlxsw_sp driver.

Nogah Frankel (3):
  net: sch: prio: Add offload ability to PRIO qdisc
  mlxsw: spectrum: qdiscs: Support PRIO qdisc offload
  mlxsw: spectrum: qdiscs: Support stats for PRIO qdisc

Yuval Mintz (2):
  mlxsw: reg: add rdpm register
  mlxsw: spectrum_router: Configure default routing priority

 drivers/net/ethernet/mellanox/mlxsw/item.h |   2 +-
 drivers/net/ethernet/mellanox/mlxsw/reg.h  |  37 +
 drivers/net/ethernet/mellanox/mlxsw/spectrum.c |   2 +
 drivers/net/ethernet/mellanox/mlxsw/spectrum.h |   2 +
 .../net/ethernet/mellanox/mlxsw/spectrum_qdisc.c   | 174 +
 .../net/ethernet/mellanox/mlxsw/spectrum_router.c  |  24 +++
 include/linux/netdevice.h  |   1 +
 include/net/pkt_cls.h  |  25 +++
 net/sched/sch_prio.c   |  59 +++
 9 files changed, 325 insertions(+), 1 deletion(-)

-- 
2.14.3