nameserver order
I have two interfaces, each of them picking dhcp info from two distinct servers (different networks). How can I tell network manager to use the nameserver from interface B first and then that from interface A? If we were to use /etc/resolv.conf, I want nameserver 192.168.4.1 nameserver 10.0.0.1 Instead of nameserver 10.0.0.1 nameserver 192.168.4.1 ___ networkmanager-list mailing list networkmanager-list@gnome.org https://mail.gnome.org/mailman/listinfo/networkmanager-list
Re: A general (learning) query
On Tue, Jun 12, 2012 at 3:41 PM, Mauricio Tavares wrote: > On Tue, Jun 12, 2012 at 2:49 PM, Ajay Garg wrote: >> The ISP details are :: >> >> Country : Uruguay >> Provider : Ancel >> Plan : GPRS >> > Do I take you do not know this modem's initialization string? > > If I were in your shoes, I would first identify how the modem is > being seen by the OS. Then maybe use minicom or something and try to > talk to it. And then see if you can come up with an initialization > string it likes and then try to manually dial out (call your own > phone?). > NVM, it took the init string. But, it might be easier to use a terminal program here. >> >> Thanks and Regards, >> Ajay >> >> >> On Wed, Jun 13, 2012 at 12:11 AM, Ajay Garg wrote: >>> >>> Hi Experts :) >>> >>> I am trying to connect via a 3G USB modem (via wvdial), and get the >>> following error :: >>> >>> >>> >>> -bash-4.1# wvdial >>> --> WvDial: Internet dialer version 1.61 >>> --> Cannot get information for serial port. >>> --> Initializing modem. >>> --> Sending: ATZ >>> ATZ >>> OK >>> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 >>> ATQ0 V1 E1 S0=0 &C1 &D2 >>> OK >>> --> Modem initialized. >>> --> Sending: ATDT*99# >>> --> Waiting for carrier. >>> ATDT*99# >>> ERROR >>> --> Invalid dial command. >>> --> Disconnecting at Tue Jun 12 15:35:16 2012 >>> >>> >>> >>> >>> I have googled, and found quite a posts. >>> However, all these points discuss about implementation details, and I am >>> feeling overwhelmed. >>> >>> I will be grateful if someone could please point me to some literature, >>> that states the entire lifecylce of USB modem connection >>> In particular, I don't quite understand how some particular AT commands >>> are linked to the USB-model/ISP/APN. >>> >>> Any help will be a big boost to solving the specific problem at my end. >>> >>> >>> >>> I will be really grateful guys. >>> >>> >>> Thanks and Regards, >>> Ajay >> >> >> >> ___ >> networkmanager-list mailing list >> networkmanager-list@gnome.org >> https://mail.gnome.org/mailman/listinfo/networkmanager-list >> ___ networkmanager-list mailing list networkmanager-list@gnome.org https://mail.gnome.org/mailman/listinfo/networkmanager-list
Re: A general (learning) query
On Tue, Jun 12, 2012 at 2:49 PM, Ajay Garg wrote: > The ISP details are :: > > Country : Uruguay > Provider : Ancel > Plan : GPRS > Do I take you do not know this modem's initialization string? If I were in your shoes, I would first identify how the modem is being seen by the OS. Then maybe use minicom or something and try to talk to it. And then see if you can come up with an initialization string it likes and then try to manually dial out (call your own phone?). > > Thanks and Regards, > Ajay > > > On Wed, Jun 13, 2012 at 12:11 AM, Ajay Garg wrote: >> >> Hi Experts :) >> >> I am trying to connect via a 3G USB modem (via wvdial), and get the >> following error :: >> >> >> >> -bash-4.1# wvdial >> --> WvDial: Internet dialer version 1.61 >> --> Cannot get information for serial port. >> --> Initializing modem. >> --> Sending: ATZ >> ATZ >> OK >> --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 >> ATQ0 V1 E1 S0=0 &C1 &D2 >> OK >> --> Modem initialized. >> --> Sending: ATDT*99# >> --> Waiting for carrier. >> ATDT*99# >> ERROR >> --> Invalid dial command. >> --> Disconnecting at Tue Jun 12 15:35:16 2012 >> >> >> >> >> I have googled, and found quite a posts. >> However, all these points discuss about implementation details, and I am >> feeling overwhelmed. >> >> I will be grateful if someone could please point me to some literature, >> that states the entire lifecylce of USB modem connection >> In particular, I don't quite understand how some particular AT commands >> are linked to the USB-model/ISP/APN. >> >> Any help will be a big boost to solving the specific problem at my end. >> >> >> >> I will be really grateful guys. >> >> >> Thanks and Regards, >> Ajay > > > > ___ > networkmanager-list mailing list > networkmanager-list@gnome.org > https://mail.gnome.org/mailman/listinfo/networkmanager-list > ___ networkmanager-list mailing list networkmanager-list@gnome.org https://mail.gnome.org/mailman/listinfo/networkmanager-list
L2TP on IPSec
How is the L2TP on IPSec support in network manager nowadays? ___ networkmanager-list mailing list networkmanager-list@gnome.org http://mail.gnome.org/mailman/listinfo/networkmanager-list
NM vs broadcom on planet Ubuntu 10.10
I have here a laptop (hp pavilion dv6700 ) with ubuntu 10.10 and a broadcom (bcm 94312 LP-PHY) wireless card using the non-free drivers (tried both the b43 and the SPA(?) one). When I try to connect to a WPA2/AES router, I can enter my password and it will be trying to connect for about a minute and then go back to asking for the password again. But, if I replace network-manager with wicd, I have no problem connecting. Why would NM not like this setup? ___ networkmanager-list mailing list networkmanager-list@gnome.org http://mail.gnome.org/mailman/listinfo/networkmanager-list
Re: Automagically restart wifi connection
On Mon, Jun 20, 2011 at 11:18 AM, Alex Pyattaev wrote: > What kind of connection loss do you have? Can you still ping the access point > for example? Is there any error in system log or dmesg? I have encountered > similar problems with some AP's, and sometimes it was a bug in AP. You will find it rather amusing: it turned out to be user error but a rather unexpected one. You see, this machine had a pci wifi card I did not know about (antenna was out). Problem is that sometimes it would not show on dmesg or ifconfig; I guess that is why they were using the other wireless device. In any case, when I was able to see both wireless devices sporting two distinct MACs, I then went looking for #2. Old card removed and I have not dropped signal since. > On Monday 20 June 2011 10:51:11 Mauricio Tavares wrote: >> I have here a machine that is connected to the internet through >> wireless. Every so often it will loose connection to the router. And >> to get it back I have to maually go into Network Manager, disable the >> connection, and then re-enable it. Is there a way to tell network >> manager if it loses its connection it should do something like that? >> ___ >> networkmanager-list mailing list >> networkmanager-list@gnome.org >> http://mail.gnome.org/mailman/listinfo/networkmanager-list > -- > Alex Pyattaev, > Researcher, > Tampere University of Technology, > Finland > ___ > networkmanager-list mailing list > networkmanager-list@gnome.org > http://mail.gnome.org/mailman/listinfo/networkmanager-list > ___ networkmanager-list mailing list networkmanager-list@gnome.org http://mail.gnome.org/mailman/listinfo/networkmanager-list
Automagically restart wifi connection
I have here a machine that is connected to the internet through wireless. Every so often it will loose connection to the router. And to get it back I have to maually go into Network Manager, disable the connection, and then re-enable it. Is there a way to tell network manager if it loses its connection it should do something like that? ___ networkmanager-list mailing list networkmanager-list@gnome.org http://mail.gnome.org/mailman/listinfo/networkmanager-list