Re: de-facto standard dial number for CDMA
> pe, 2008-05-09 kello 20:41 +0900, Masato Taruishi kirjoitti:
> > > ke, 2008-05-07 kello 19:17 +0900, Masato Taruishi kirjoitti:
> > > > Hi, guys.
> > > >
> > > > According to the source code of network-manager-applet,
> > > > Auto CDMA network connection assumes the dial number is
> > > > #777, but CDMA network providers in Japan don't use this
> > > > number. For example, EMobile, HSDPA provider in Japan, is
> > > > using *99***1#, and AU, CDMA mobile phone service by KDDI
> > > > company, is using *99**24#.
> > >
> > > I was under the impression that this *99***# is only for GMS
> > > modems, but now this makes it very interesting. Very interesting
> > > indeed.
> > >
> > > I would really appreciate if you could send me some pppd, chat, pon,
> > > whatever configuration files and scripts that you have used with these
> > > Japanese devices. Could you also do some additional testing[1]?
> >
> > Sorry, I was misunderstanding. I investigated the emobile card.
> > It's a HSDPA, kind of GSM, modem, but supports only AT+CGDCONT. It
> > doesn't support AT+CREG nor AT+COPS.
>
> OK. And that AU (by KDDI) you mentioned is also GSM, right?
AU is CDMA2000, or IMT-MC, 3G based on cdmaOne. I don't know its
detail because I don't have its device. I'll look for a device of
AU and investigated the spec.
Thanks
>
>
> > type: mobile data card
> > model: D01NE
> > provider: emobile
> >
> > Minicom 2.3-rc1
> >
> > AT+CGDCONT?
> > +CGDCONT: 1,"IP","emb.ne.jp","",0,0
>
> Great. Thanks.
>
>
>
> > OK
> >
> > AT+CREG?
> >
> > ERROR
> >
> > So in order to use the card in NetworkManager, I had to register
> > the card as a cdma device though it should work as a gsm device.
> >
> > Is there any other card which doesn't support CREG?
> >
> > Best regards
> >
> >
> > > > I have an EMobile card, and successfully can use the card
> > > > with NetworkManager, but I had to create manual connection
> > > > because the dial number is different from #777.
> > > >
> > > >s_cdma->number = g_strdup ("#777"); /* De-facto standard for CDMA */
> > > >
> > > > In order to make the card available by Auto CDMA network
> > > > connection, one possible solution is to put the dial
> > > > number into its hal fdi database because each card is
> > > > only used for a specific provider in Japan. However,
> > > > I wonder if it's applicable in other countries.
> > >
> > > I'm working with a mobile broadband service provider database, but I
> > > have not nailed down the specification yet. These dial numbers could go
> > > there if they truly are service provider specific.
> > >
> > >
> > > -- Antti
> > >
> > > [1] http://live.gnome.org/NetworkManager/MobileBroadband/GprsCid
> > >
> > >
> > > > Is t
> > > > here any better way to support multiple auto CDMA
> > > > network in NetworkManager?
> > > >
> > > > Thanks in advance
> > > >
> > > >
> > > > ___
> > > > NetworkManager-list mailing list
> > > > NetworkManager-list@gnome.org
> > > > http://mail.gnome.org/mailman/listinfo/networkmanager-list
> > >
> >
>
___
NetworkManager-list mailing list
NetworkManager-list@gnome.org
http://mail.gnome.org/mailman/listinfo/networkmanager-list
Re: de-facto standard dial number for CDMA
pe, 2008-05-09 kello 20:41 +0900, Masato Taruishi kirjoitti:
> > ke, 2008-05-07 kello 19:17 +0900, Masato Taruishi kirjoitti:
> > > Hi, guys.
> > >
> > > According to the source code of network-manager-applet,
> > > Auto CDMA network connection assumes the dial number is
> > > #777, but CDMA network providers in Japan don't use this
> > > number. For example, EMobile, HSDPA provider in Japan, is
> > > using *99***1#, and AU, CDMA mobile phone service by KDDI
> > > company, is using *99**24#.
> >
> > I was under the impression that this *99***# is only for GMS
> > modems, but now this makes it very interesting. Very interesting
> > indeed.
> >
> > I would really appreciate if you could send me some pppd, chat, pon,
> > whatever configuration files and scripts that you have used with these
> > Japanese devices. Could you also do some additional testing[1]?
>
> Sorry, I was misunderstanding. I investigated the emobile card.
> It's a HSDPA, kind of GSM, modem, but supports only AT+CGDCONT. It
> doesn't support AT+CREG nor AT+COPS.
OK. And that AU (by KDDI) you mentioned is also GSM, right?
> type: mobile data card
> model: D01NE
> provider: emobile
>
> Minicom 2.3-rc1
>
> AT+CGDCONT?
> +CGDCONT: 1,"IP","emb.ne.jp","",0,0
Great. Thanks.
> OK
>
> AT+CREG?
>
> ERROR
>
> So in order to use the card in NetworkManager, I had to register
> the card as a cdma device though it should work as a gsm device.
>
> Is there any other card which doesn't support CREG?
>
> Best regards
>
>
> > > I have an EMobile card, and successfully can use the card
> > > with NetworkManager, but I had to create manual connection
> > > because the dial number is different from #777.
> > >
> > >s_cdma->number = g_strdup ("#777"); /* De-facto standard for CDMA */
> > >
> > > In order to make the card available by Auto CDMA network
> > > connection, one possible solution is to put the dial
> > > number into its hal fdi database because each card is
> > > only used for a specific provider in Japan. However,
> > > I wonder if it's applicable in other countries.
> >
> > I'm working with a mobile broadband service provider database, but I
> > have not nailed down the specification yet. These dial numbers could go
> > there if they truly are service provider specific.
> >
> >
> > -- Antti
> >
> > [1] http://live.gnome.org/NetworkManager/MobileBroadband/GprsCid
> >
> >
> > > Is t
> > > here any better way to support multiple auto CDMA
> > > network in NetworkManager?
> > >
> > > Thanks in advance
> > >
> > >
> > > ___
> > > NetworkManager-list mailing list
> > > NetworkManager-list@gnome.org
> > > http://mail.gnome.org/mailman/listinfo/networkmanager-list
> >
>
___
NetworkManager-list mailing list
NetworkManager-list@gnome.org
http://mail.gnome.org/mailman/listinfo/networkmanager-list
Re: de-facto standard dial number for CDMA
> ke, 2008-05-07 kello 19:17 +0900, Masato Taruishi kirjoitti:
> > Hi, guys.
> >
> > According to the source code of network-manager-applet,
> > Auto CDMA network connection assumes the dial number is
> > #777, but CDMA network providers in Japan don't use this
> > number. For example, EMobile, HSDPA provider in Japan, is
> > using *99***1#, and AU, CDMA mobile phone service by KDDI
> > company, is using *99**24#.
>
> I was under the impression that this *99***# is only for GMS
> modems, but now this makes it very interesting. Very interesting
> indeed.
>
> I would really appreciate if you could send me some pppd, chat, pon,
> whatever configuration files and scripts that you have used with these
> Japanese devices. Could you also do some additional testing[1]?
Sorry, I was misunderstanding. I investigated the emobile card.
It's a HSDPA, kind of GSM, modem, but supports only AT+CGDCONT. It
doesn't support AT+CREG nor AT+COPS.
type: mobile data card
model: D01NE
provider: emobile
Minicom 2.3-rc1
AT+CGDCONT?
+CGDCONT: 1,"IP","emb.ne.jp","",0,0
OK
AT+CREG?
ERROR
So in order to use the card in NetworkManager, I had to register
the card as a cdma device though it should work as a gsm device.
Is there any other card which doesn't support CREG?
Best regards
> > I have an EMobile card, and successfully can use the card
> > with NetworkManager, but I had to create manual connection
> > because the dial number is different from #777.
> >
> >s_cdma->number = g_strdup ("#777"); /* De-facto standard for CDMA */
> >
> > In order to make the card available by Auto CDMA network
> > connection, one possible solution is to put the dial
> > number into its hal fdi database because each card is
> > only used for a specific provider in Japan. However,
> > I wonder if it's applicable in other countries.
>
> I'm working with a mobile broadband service provider database, but I
> have not nailed down the specification yet. These dial numbers could go
> there if they truly are service provider specific.
>
>
> -- Antti
>
> [1] http://live.gnome.org/NetworkManager/MobileBroadband/GprsCid
>
>
> > Is t
> > here any better way to support multiple auto CDMA
> > network in NetworkManager?
> >
> > Thanks in advance
> >
> >
> > ___
> > NetworkManager-list mailing list
> > NetworkManager-list@gnome.org
> > http://mail.gnome.org/mailman/listinfo/networkmanager-list
>
___
NetworkManager-list mailing list
NetworkManager-list@gnome.org
http://mail.gnome.org/mailman/listinfo/networkmanager-list
Re: de-facto standard dial number for CDMA
Hi, Masato.
ke, 2008-05-07 kello 19:17 +0900, Masato Taruishi kirjoitti:
> Hi, guys.
>
> According to the source code of network-manager-applet,
> Auto CDMA network connection assumes the dial number is
> #777, but CDMA network providers in Japan don't use this
> number. For example, EMobile, HSDPA provider in Japan, is
> using *99***1#, and AU, CDMA mobile phone service by KDDI
> company, is using *99**24#.
I was under the impression that this *99***# is only for GMS
modems, but now this makes it very interesting. Very interesting
indeed.
I would really appreciate if you could send me some pppd, chat, pon,
whatever configuration files and scripts that you have used with these
Japanese devices. Could you also do some additional testing[1]?
> I have an EMobile card, and successfully can use the card
> with NetworkManager, but I had to create manual connection
> because the dial number is different from #777.
>
>s_cdma->number = g_strdup ("#777"); /* De-facto standard for CDMA */
>
> In order to make the card available by Auto CDMA network
> connection, one possible solution is to put the dial
> number into its hal fdi database because each card is
> only used for a specific provider in Japan. However,
> I wonder if it's applicable in other countries.
I'm working with a mobile broadband service provider database, but I
have not nailed down the specification yet. These dial numbers could go
there if they truly are service provider specific.
-- Antti
[1] http://live.gnome.org/NetworkManager/MobileBroadband/GprsCid
> Is t
> here any better way to support multiple auto CDMA
> network in NetworkManager?
>
> Thanks in advance
>
>
> ___
> NetworkManager-list mailing list
> NetworkManager-list@gnome.org
> http://mail.gnome.org/mailman/listinfo/networkmanager-list
___
NetworkManager-list mailing list
NetworkManager-list@gnome.org
http://mail.gnome.org/mailman/listinfo/networkmanager-list
de-facto standard dial number for CDMA
Hi, guys.
According to the source code of network-manager-applet,
Auto CDMA network connection assumes the dial number is
#777, but CDMA network providers in Japan don't use this
number. For example, EMobile, HSDPA provider in Japan, is
using *99***1#, and AU, CDMA mobile phone service by KDDI
company, is using *99**24#.
I have an EMobile card, and successfully can use the card
with NetworkManager, but I had to create manual connection
because the dial number is different from #777.
s_cdma->number = g_strdup ("#777"); /* De-facto standard for CDMA */
In order to make the card available by Auto CDMA network
connection, one possible solution is to put the dial
number into its hal fdi database because each card is
only used for a specific provider in Japan. However,
I wonder if it's applicable in other countries.
Is there any better way to support multiple auto CDMA
network in NetworkManager?
Thanks in advance
___
NetworkManager-list mailing list
NetworkManager-list@gnome.org
http://mail.gnome.org/mailman/listinfo/networkmanager-list
