Re: gsm roaming enabling
In data mercoledì 02 giugno 2010 10:09:03, Maxime Boure ha scritto: : > Hello Dan, > > I have a Huawei e180. I was thinking that the command : > ** (modem-manager:1472): DEBUG: (ttyUSB0): --> 'AT+CREG=0' > would be the problem. Doesn't it have to be set to '2' to enable roaming ? > > Just so you know my 3G stick works fine in France. I don't know if it's the same problem, but there seem to be a regression bug in some more or less recent linux kernels that pervents my Huawei E169 (E620) to roam in gsm mode. I filed the bug against the ubuntu kernel (2.6.32), but it may affect other distros as well, because it may be an upstream bug. Linux 2.6.34 vanilla solves the problem for me. https://bugs.launchpad.net/bugs/586894 HTH, Lucio. ___ networkmanager-list mailing list networkmanager-list@gnome.org http://mail.gnome.org/mailman/listinfo/networkmanager-list
Re: gsm roaming enabling
On Wed, 2010-06-02 at 10:09 +0200, Maxime Boure wrote: > Hello Dan, > > > I have a Huawei e180. I was thinking that the command : > ** (modem-manager:1472): DEBUG: (ttyUSB0): --> 'AT+CREG=0' > would be the problem. Doesn't it have to be set to '2' to enable > roaming ? No, +CREG= only tells the modem to start or stop unsolicited registration notifications, which is useful so that we don't have to poll the device every 5 seconds to figure out what it's status is. +COPS deals with operation selection. Dan ___ networkmanager-list mailing list networkmanager-list@gnome.org http://mail.gnome.org/mailman/listinfo/networkmanager-list
Re: gsm roaming enabling
Hello Dan, I have a Huawei e180. I was thinking that the command : ** (modem-manager:1472): DEBUG: (ttyUSB0): --> 'AT+CREG=0' would be the problem. Doesn't it have to be set to '2' to enable roaming ? Just so you know my 3G stick works fine in France. Thanks a lot, Maxime ___ networkmanager-list mailing list networkmanager-list@gnome.org http://mail.gnome.org/mailman/listinfo/networkmanager-list
Re: gsm roaming enabling
On Fri, 2010-05-28 at 12:26 +0200, Maxime Boure wrote: > Hello I have a french SIM card and I would like to connect it in > Canada. It seems that the roaming is not enabled. What kind of 3G stick do you have again? This isn't by chance a Huwei E1552? > ** Message: Loaded plugin Generic > ** Message: Loaded plugin Option High-Speed > ** Message: Loaded plugin Ericsson MBM > ** Message: Loaded plugin Huawei > ** Message: Loaded plugin ZTE > ** (modem-manager:1472): DEBUG: (Huawei): (ttyUSB1) deferring support > check > ** Message: (ttyUSB0) opening serial device... > ** (modem-manager:1472): DEBUG: (ttyUSB0): probe requested by plugin > 'Huawei' > ** (modem-manager:1472): DEBUG: (ttyUSB0): --> 'AT+GCAP' > ** (modem-manager:1472): DEBUG: (ttyUSB0): <-- '+GCAP: +CGSM, > +FCLASS,+DSOK' > ** Message: (ttyUSB0) closing serial device... > ** Message: (Huawei): GSM > modem /sys/devices/platform/ehci-omap.0/usb1/1-1 claimed port ttyUSB0 > ** (modem-manager:1472): DEBUG: Added > modem /sys/devices/platform/ehci-omap.0/usb1/1-1 > ** (modem-manager:1472): DEBUG: Exported > modem /sys/devices/platform/ehci-omap.0/usb1/1-1 > as /org/freedesktop/ModemManager/Modems/0 > NetworkManager: (ttyUSB0): new GSM device (driver: 'option1') > NetworkManager: (ttyUSB0): exported > as /org/freedesktop/NetworkManager/Devices/1 > NetworkManager: (ttyUSB0): now managed > NetworkManager: (ttyUSB0): device state change: 1 -> 2 (reason > 2) > NetworkManager: (ttyUSB0): deactivating device (reason: 2). > NetworkManager: (ttyUSB0): device state change: 2 -> 3 (reason > 0) > NetworkManager: Activation (ttyUSB0) starting connection > 'bouyguestel' > NetworkManager: (ttyUSB0): device state change: 3 -> 4 (reason > 0) > NetworkManager: Activation (ttyUSB0) Stage 1 of 5 (Device > Prepare) scheduled... > NetworkManager: Activation (ttyUSB0) Stage 1 of 5 (Device > Prepare) started... > ** Message: (ttyUSB0) opening serial device... > NetworkManager: Activation (ttyUSB0) Stage 1 of 5 (Device > Prepare) complete. > ** Message: Modem /org/freedesktop/ModemManager/Modems/0: state > changed (disabled -> enabling) > ** (modem-manager:1472): DEBUG: (ttyUSB0): --> 'ATZ E0 V1 +CMEE=1' > ** (modem-manager:1472): DEBUG: (ttyUSB0): <-- 'OK' > ** (modem-manager:1472): DEBUG: (ttyUSB0): --> 'ATE0 +CMEE=1' > ** (modem-manager:1472): DEBUG: (ttyUSB0): <-- 'OK' > ** (modem-manager:1472): DEBUG: (ttyUSB0): --> 'ATX4 &C1' > ** (modem-manager:1472): DEBUG: (ttyUSB0): <-- 'OK' > ** (modem-manager:1472): DEBUG: (ttyUSB0): --> 'AT+CREG=0' > ** (modem-manager:1472): DEBUG: (ttyUSB0): <-- 'OK' > ** (modem-manager:1472): DEBUG: (ttyUSB0): --> 'AT+CFUN=1' > ** (modem-manager:1472): DEBUG: (ttyUSB0): <-- 'OK' > ** Message: Modem /org/freedesktop/ModemManager/Modems/0: state > changed (enabling -> enabled) > ** (modem-manager:1472): DEBUG: (ttyUSB0): --> 'AT+CPIN?' > ** (modem-manager:1472): DEBUG: (ttyUSB0): <-- '+CPIN: > READYOK' > ** (modem-manager:1472): DEBUG: (ttyUSB0): --> 'AT+COPS=0,,' > ** (modem-manager:1472): DEBUG: (ttyUSB0): <-- 'OK' > ** (modem-manager:1472): DEBUG: (ttyUSB0): --> 'AT+CREG?' > ** (modem-manager:1472): DEBUG: (ttyUSB0): <-- '+CREG: > 0,2OK' > ** (modem-manager:1472): DEBUG: Registration state changed: 2 > ** Message: Modem /org/freedesktop/ModemManager/Modems/0: state > changed (enabled -> searching) > ** (modem-manager:1472): DEBUG: (ttyUSB1): re-checking support... > ** Message: (ttyUSB1) opening serial device... > ** (modem-manager:1472): DEBUG: (ttyUSB1): <-- > '^BOOT:35591147,0,0,0,31' > ** Message: (ttyUSB1) closing serial device... > ** Message: (Huawei): GSM > modem /sys/devices/platform/ehci-omap.0/usb1/1-1 claimed port ttyUSB1 > ** (modem-manager:1472): DEBUG: (ttyUSB0): --> 'AT+CREG?' > ** (modem-manager:1472): DEBUG: (ttyUSB0): <-- '+CREG: > 0,2OK' > ** (modem-manager:1472): DEBUG: (ttyUSB0): --> 'AT+CREG?' > ** (modem-manager:1472): DEBUG: (ttyUSB0): <-- '+CREG: > 0,2OK' > ** (modem-manager:1472): DEBUG: (ttyUSB0): --> 'AT+CREG?' > ** (modem-manager:1472): DEBUG: (ttyUSB0): <-- '+CREG: > 0,2OK' > ** (modem-manager:1472): DEBUG: (ttyUSB0): --> 'AT+CREG?' > ** (modem-manager:1472): DEBUG: (ttyUSB0): <-- '+CREG: > 0,2OK' > ** (modem-manager:1472): DEBUG: (ttyUSB0): --> 'AT+CREG?' Status '2' in the +CREG response means "searching". Normally this is simply that the device cannot find a compatible provider to use, either because your SIM card is not loaded with roaming networks, or because the frequency bands your device supports are not supported in the country you're in. However, on the E1552 specifically we've identified a problem where ModemManager sending AT+COPS=0,, causes the card to stay in 'searching' mode indefinitely. Last month I fixed MM to *not* send AT+COPS=0,, if the card was already registered on a network, so you may be able to get connected if you wait 30 seconds or so after plugging the device in for it to register with a network before trying to connect. Let me know what model of Huawei devi
gsm roaming enabling
Hello I have a french SIM card and I would like to connect it in Canada. It seems that the roaming is not enabled. ** Message: Loaded plugin Generic ** Message: Loaded plugin Option High-Speed ** Message: Loaded plugin Ericsson MBM ** Message: Loaded plugin Huawei ** Message: Loaded plugin ZTE ** (modem-manager:1472): DEBUG: (Huawei): (ttyUSB1) deferring support check ** Message: (ttyUSB0) opening serial device... ** (modem-manager:1472): DEBUG: (ttyUSB0): probe requested by plugin 'Huawei' ** (modem-manager:1472): DEBUG: (ttyUSB0): --> 'AT+GCAP' ** (modem-manager:1472): DEBUG: (ttyUSB0): <-- '+GCAP: +CGSM,+FCLASS,+DSOK' ** Message: (ttyUSB0) closing serial device... ** Message: (Huawei): GSM modem /sys/devices/platform/ehci-omap.0/usb1/1-1 claimed port ttyUSB0 ** (modem-manager:1472): DEBUG: Added modem /sys/devices/platform/ehci-omap.0/usb1/1-1 ** (modem-manager:1472): DEBUG: Exported modem /sys/devices/platform/ehci-omap.0/usb1/1-1 as /org/freedesktop/ModemManager/Modems/0 NetworkManager: (ttyUSB0): new GSM device (driver: 'option1') NetworkManager: (ttyUSB0): exported as /org/freedesktop/NetworkManager/Devices/1 NetworkManager: (ttyUSB0): now managed NetworkManager: (ttyUSB0): device state change: 1 -> 2 (reason 2) NetworkManager: (ttyUSB0): deactivating device (reason: 2). NetworkManager: (ttyUSB0): device state change: 2 -> 3 (reason 0) NetworkManager: Activation (ttyUSB0) starting connection 'bouyguestel' NetworkManager: (ttyUSB0): device state change: 3 -> 4 (reason 0) NetworkManager: Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) scheduled... NetworkManager: Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) started... ** Message: (ttyUSB0) opening serial device... NetworkManager: Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) complete. ** Message: Modem /org/freedesktop/ModemManager/Modems/0: state changed (disabled -> enabling) ** (modem-manager:1472): DEBUG: (ttyUSB0): --> 'ATZ E0 V1 +CMEE=1' ** (modem-manager:1472): DEBUG: (ttyUSB0): <-- 'OK' ** (modem-manager:1472): DEBUG: (ttyUSB0): --> 'ATE0 +CMEE=1' ** (modem-manager:1472): DEBUG: (ttyUSB0): <-- 'OK' ** (modem-manager:1472): DEBUG: (ttyUSB0): --> 'ATX4 &C1' ** (modem-manager:1472): DEBUG: (ttyUSB0): <-- 'OK' ** (modem-manager:1472): DEBUG: (ttyUSB0): --> 'AT+CREG=0' ** (modem-manager:1472): DEBUG: (ttyUSB0): <-- 'OK' ** (modem-manager:1472): DEBUG: (ttyUSB0): --> 'AT+CFUN=1' ** (modem-manager:1472): DEBUG: (ttyUSB0): <-- 'OK' ** Message: Modem /org/freedesktop/ModemManager/Modems/0: state changed (enabling -> enabled) ** (modem-manager:1472): DEBUG: (ttyUSB0): --> 'AT+CPIN?' ** (modem-manager:1472): DEBUG: (ttyUSB0): <-- '+CPIN: READYOK' ** (modem-manager:1472): DEBUG: (ttyUSB0): --> 'AT+COPS=0,,' ** (modem-manager:1472): DEBUG: (ttyUSB0): <-- 'OK' ** (modem-manager:1472): DEBUG: (ttyUSB0): --> 'AT+CREG?' ** (modem-manager:1472): DEBUG: (ttyUSB0): <-- '+CREG: 0,2OK' ** (modem-manager:1472): DEBUG: Registration state changed: 2 ** Message: Modem /org/freedesktop/ModemManager/Modems/0: state changed (enabled -> searching) ** (modem-manager:1472): DEBUG: (ttyUSB1): re-checking support... ** Message: (ttyUSB1) opening serial device... ** (modem-manager:1472): DEBUG: (ttyUSB1): <-- '^BOOT:35591147,0,0,0,31' ** Message: (ttyUSB1) closing serial device... ** Message: (Huawei): GSM modem /sys/devices/platform/ehci-omap.0/usb1/1-1 claimed port ttyUSB1 ** (modem-manager:1472): DEBUG: (ttyUSB0): --> 'AT+CREG?' ** (modem-manager:1472): DEBUG: (ttyUSB0): <-- '+CREG: 0,2OK' ** (modem-manager:1472): DEBUG: (ttyUSB0): --> 'AT+CREG?' ** (modem-manager:1472): DEBUG: (ttyUSB0): <-- '+CREG: 0,2OK' ** (modem-manager:1472): DEBUG: (ttyUSB0): --> 'AT+CREG?' ** (modem-manager:1472): DEBUG: (ttyUSB0): <-- '+CREG: 0,2OK' ** (modem-manager:1472): DEBUG: (ttyUSB0): --> 'AT+CREG?' ** (modem-manager:1472): DEBUG: (ttyUSB0): <-- '+CREG: 0,2OK' ** (modem-manager:1472): DEBUG: (ttyUSB0): --> 'AT+CREG?' What config file can I change to get it working ? Thanks ___ networkmanager-list mailing list networkmanager-list@gnome.org http://mail.gnome.org/mailman/listinfo/networkmanager-list
