[newbie] LAN settings
Can anyone tell me where and how put my net numbers (ip,netmask etc) ? I'm new to Linux so...you could send your example(file) too. Tego nie znajdziesz w ¿adnym sklepie! [ http://oferty.onet.pl ]
[newbie] mandrake8.0 and internet
Can anyone tell me where to write my ip, mask, dns numbers to connect to internet?Where is this file or if you could send me for example your file (if you want you can change numbers - i want just example)[EMAIL PROTECTED] Tego nie znajdziesz w ¿adnym sklepie! [ http://oferty.onet.pl ]
[newbie] linux and i815e
i just want to know... does lns mandrake 8.1 support i815e chipset (music, video) in 100%. i remember that m80 loaded drivers from 810 - Original Message - From: Ronald J. Hall [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, November 30, 2001 4:29 PM Subject: Re: [newbie] 3D support for SIS 300/305 AGP 16 meg video card? Tom Brinkman wrote: Just a thought, try 'sndconfig --noprobe' without X, IOW's from a level 3 prompt. I've never had the problem, but I've talked to some people with Crystal chips, and it worked for them. -- Tom Brinkman Galveston Bay, USA Thanks Tom, I'll try that in a few minutes! ;-) BTW, first time I've -never- got sound from a Mandrake install. My other 2 comps were picked up just fine (Sblaster Live and onboard audio, just had to tweak them a bit - but then, I was born to tweak - its genetic grin). -- /\ DarkLord \/ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com -- Tego nie znajdziesz w zadnym sklepie! [ http://oferty.onet.pl ] Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] linux mandrake 8.1 and harddrake
when i had mamdrake80 i couldnt run harddrake. after clicking on it in taskbar, HDD was running for about 5 sec and then the screen became black with a blinking cursor in the upperleft corner. Does the system hang or i just have to wait much longer (i waited 5 min and nothing happened) ? - Original Message - From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, November 30, 2001 5:18 PM Subject: [newbie] Linux Network Install Hey group, Has anyone here ever installed Drake Linux over the network through a PCMCIA card? Andrew -- It's a beautiful day...don't let it get away... ~U2~ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com -- Tego nie znajdziesz w zadnym sklepie! [ http://oferty.onet.pl ] Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] Error compiling NVIDIA kernel...
Problem with Realtek 8139(abc) lan card. My LAN is connected to a LAN (13 comps). everyone runs WINxx, but i decided to install MAndrake 80. There's a problem because while initializing system (loading modules) there's a problem with my card (eth0). I've fot 2 DNS, gateway ip and my ip. Is it enough to connect to the internet ? And where to put those ip's. If you counld answer on my mail [EMAIL PROTECTED] THX - Original Message - From: joe [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Wednesday, November 28, 2001 2:22 PM Subject: Re: [newbie] Error compiling NVIDIA kernel... On Saturday 24 November 2001 08:27, you wrote: On Saturday 24 November 2001 16:50, you wrote: Install the kernel-headers and kernel-source packages first. They aren't by default . Then you'll be upaway:) Thanks, That's _EXACTLY_ the problem. When I went to install kernel-source using the software manager the package didn't show up under installable so I assumed it was. I actually had to go look for the source rpm on the mandrake install CDs...so something else is going wrong there ??? Anyway problem solvedboth components successfully recompiled and are being installed Joe For the archives: http://www.linux-mandrake.com/en/flists.php3 Good luck Harm Bathoorn I'm getting the following error when I try to compile the latest version of the NVIDIA_kernel driver. In file included froThanks, That's _EXACTLY_ the problem. When I went to install kernel-source using the software manager the package didn't show up under installable so I assumed it was. I actually had to go look for the source rpm on the mandrake install CDs...so something else is going wrong there ??? Anyway problem solvedboth components successfully recompiled and are being installedm nv.c:50: /usr/include/linux/modversions.h:1:2: #error Modules should never use kernel-headers system headers, /usr/include/linux/modversions.h:2:2: #error but headers from an appropriate kernel-source ...using v3.0.2 of the gcc compiler Any help would be much appreciated Joe ps... where is the archive of these discussions kept..that's probably a good place to begin looing in the future --- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com -- Tego nie znajdziesz w zadnym sklepie! [ http://oferty.onet.pl ] Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] LAN and eth0 loading
The problem is that my eth card doesnt want to load while starting linux M8.0. How to fix it ? DAMN! som errors i dont understand. - Original Message - From: Anuerin G.Diaz [EMAIL PROTECTED] To: mandrake Sent: Thursday, November 29, 2001 9:18 AM Subject: Re: [newbie] Servers On Wed, 28 Nov 2001 06:55:58 -0500, Jose M. Sanchez [EMAIL PROTECTED] wrote: snip WHAT? Check out SMBClient and SMBMount... All Komba2 does is invoke these programs, which are part of Samba. I.E. smbclient -L \\Windowsmachine -U Validuser Where validuser is a username that you have used at least once at your Winblows box to log into the network. (this is important!). If you can do this Samba will let you utilize Winblows printers from Linux, even WinPrinters (read brain damaged printers)! Lisa/Reslisa let's Konqueror BROWSE Winblows shares as well. -JMS hi, any tips on configuring LISA? the document that it came with is too cryptic and ,even if I followed all the instruction, the LISA tab in the configuration still displays the 'not yet configured' message. ill look into komba since I dont use konqueror much (I use xwc). ciao! -- Programming, an artform that fights back. === Anuerin G. Diaz Design Engineer 25/F Equitable-PCI Tower ADB Ave. cor. Poveda St., Ortigas Center, Pasig City, Philippines 1605 Tel no: (632) 6383070 loc 75 === Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com -- Tego nie znajdziesz w zadnym sklepie! [ http://oferty.onet.pl ] Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] a good help to mandrake 8.0
Fellows!I piss on MS and i wont buy any netter, faster, more stable, cheaper system. OVER ! I WANT LINUX !!! But I'm green socan you tell me (Give) an address where i could download tutorial or getting started to Mandrake8 ?Better in Polish - if not EnglishRemember: The MS stategy is to sell fast, much and (primo) earn as much as it is possible. Have a nice new year!(with no MS) Tego nie znajdziesz w ¿adnym sklepie! [ http://oferty.onet.pl ]
