Re: [newbie] HP Deskjet 612C....configuring
Michael Scottaline wrote: I also have an /etc/modules.conf~ file(not sure if that should be there)? Not a problem. That's just a backup of /etc/modules.conf before it was last edited. Did you try to set the printer up as a DJ550c? Mike -- "Many loads of beer were brought. What disorder, whoring, fighting, killing, and dreadful idolatry took place there." --Baltasar Rusow, Estonia, 16th century __ Get your own FREE, personal Netscape Webmail account today at http://webmail.netscape.com/ No matter what I try to set it as I get error message--usually about "unable to open parallel port device file: no such device" Bill
Re: [newbie] HP Deskjet 612C....configuring
I also have an /etc/modules.conf~ file(not sure if that should be there)? Not a problem. That's just a backup of /etc/modules.conf before it was last edited. Did you try to set the printer up as a DJ550c? Mike -- "Many loads of beer were brought. What disorder, whoring, fighting, killing, and dreadful idolatry took place there." --Baltasar Rusow, Estonia, 16th century __ Get your own FREE, personal Netscape Webmail account today at http://webmail.netscape.com/
[newbie] HP Deskjet 612C....configuring
After configuring this printer several times I cannot get it to print. When I try to set it up in linuxconf it complains about a wrong printcap file. If I try to print a test page nothing happens. If I try to print from any program I get a message about "unable to open parallel port device file: no such device" Running tunelp lp0 -s says "no such file or directory" PnP is disabled in BIOS(that got my cable modem running) and ECP is enabled on the parallel port. /etc/modules.conf pre-install pcmcia_core /etc/rc.d/init.d/pcmcia start alias parport_lowlevel parport_pc alias sound-slot-0 es1371 post-install snd-card-ens1371 modprobe snd-pcm-oss alias block-major-11 scsi_hostadapter pre-install plip modprobe parport_pc ; echo 7 /proc/parport/0/irq alias scsi_hostadapter ide-scsi alias eth0 ne alias usb-interface usb-uhci options ne2k-pci io=1040 irq=11 options rtl8139 io=1040 irq=11 options ne io=1040 irq=11 I also have an /etc/modules.conf~ file(not sure if that should be there)? It contains all the above lines except for the last 4(stops at alias eth0 ne). As my Win98 has been down for a week with at least several days to go B4 needed parts arrive I would like to get Mandrake 7.2 install completed and backed up so that it will be my primary OS. Wife will have to learn to like it.
