Hi all, I'm trying to get my TBS Montego II Sound Card to work. It came with my Dell system 1 year ago. I've run 'sndconfig' and tried setting it to all the Sound Blaster types which didn't work. (see details below.) In 'sndconfig' I also tried setting it to a different Turtle Beach System (TBS) sound card and got a message to ftp down a file but I didn't think that would work since its not the proper sound card(see details below). So, do I need a driver specifically for my sound card? Any idea where I could find the driver? Thanks, Rich [EMAIL PROTECTED] DETAILS: -------------------------------------- WINDOWS 98 Reports the following for my sound card: TBS Montego II Sound Blaster Pro Emulation Input/Output Range 0220-033F Interrupt Request 05 Direct Memory Access 01 Direct Memory Access 03 Input/Output Range 0388-038B TBS Montego II PCI Audio Memory Range F4000000-F403FFFF Interrupt Request 10 Input/Output Range 1038-103F Input/Output Range 1030-1037 TBS Montego II MPU-401 Interface Input/Output Range 0330-033F TBS Montego II Gameport Interface Input/Output Range 0201-0201 -------------------------------------- When I run "sndconfig --noprobe" I choose "Soundblaster Pro" with the following "Card Settings": IRQ 5 DMA 1 I/O Port 0x220 I/O Port 0x240 I receive the following error: MODPROBE ERRORS The following error occurred running the modprobe program: /lib/modules/2.2.15-4mdk/misc/sb.o: init_module: Device or resource busy /lib/modules/2.2.15-4mdk/misc/sb.o: insmod /lib/modules/2.2.15-4mdk/misc/sb.o: failed /lib/modules/2.2.15-4mdk/misc/sb.o: insmod sound-slot-0 failed -------------------------------------- When I run "sndconfig" with out any options it says: "A PCI Sound card was foundon your system. Model Aureal Semiconducctor/Vortex2 is not supported. -------------------------------------- When I run "sndconfig --noprobe" and if I choose either of the following sound cards to configue, I receive the message listed below it. Turtle Beach Multisound classic/Monterey/Tahiti Turtle Beach Multisound Pinnacle/Fiji To use the synthesizer on the cards, you need to obtain the firmware files. Download to /tmp and unzip the following file from Tutle Beach: ftp://ftp.tbeach.com/pub/tbs/msndcl/msndvkit.zip When unzipped, unzip the file name MsndFiles.zip. -------------------------------------- Below is my file /etc/conf.modules alias scsi_hostadapter1 ide-scsi post-install usb-storage modprobe usbkbd; modprobe keybdev alias scsi_hostadapter usb-storage alias parport_lowlevel parport_pc pre-install plip modprobe parport_pc ; echo 7 > /proc/parport/0/irq alias block-major-11 scsi_hostadapter alias usb-interface usb-uhci pre-install pcmcia_core /etc/rc.d/init.d/pcmcia start post-install supermount modprobe scsi_hostadapter ; modprobe scsi_hostadapter1 options msnd_classic io=0x3e0 irq=10 mem=0xe8000 post-install awe_wave /bin/sfxload /etc/midi/GU11-ROM.SF2 options msnd_pinnacle io=0x3e0 irq=10 cfg=0x250 mpu_io=0x330 mpu_irq=5 mem=0xb0000 options adlib_card io=0x388 alias sound-slot-0 sb options sound dmabuf=1 alias midi opl3 options opl3 io=0x388 options sb io=0x220 irq=5 dma=1 -------------------------------------- Below is my file "/proc/pci": PCI devices found: Bus 0, device 0, function 0: Host bridge: Intel 440BX - 82443BX Host (rev 3). Medium devsel. Master Capable. Latency=64. Prefetchable 32 bit memory at 0xf8000000 [0xf8000008]. Bus 0, device 1, function 0: PCI bridge: Intel 440BX - 82443BX AGP (rev 3). Medium devsel. Master Capable. Latency=128. Min Gnt=140. Bus 0, device 7, function 0: ISA bridge: Intel 82371AB PIIX4 ISA (rev 2). Medium devsel. Fast back-to-back capable. Master Capable. No bursts. Bus 0, device 7, function 1: IDE interface: Intel 82371AB PIIX4 IDE (rev 1). Medium devsel. Fast back-to-back capable. Master Capable. Latency=64. I/O at 0x1020 [0x1021]. Bus 0, device 7, function 2: USB Controller: Intel 82371AB PIIX4 USB (rev 1). Medium devsel. Fast back-to-back capable. IRQ 9. Master Capable. Latency=64. I/O at 0x1000 [0x1001]. Bus 0, device 7, function 3: Bridge: Intel 82371AB PIIX4 ACPI (rev 2). Medium devsel. Fast back-to-back capable. Bus 0, device 14, function 0: Multimedia audio controller: Unknown vendor Unknown device (rev 254). Vendor id=12eb. Device id=2. Medium devsel. Fast back-to-back capable. IRQ 10. Master Capable. Latency=64. Min Gnt=4.Max Lat=12. Non-prefetchable 32 bit memory at 0xf4000000 [0xf4000000]. I/O at 0x1038 [0x1039]. I/O at 0x1030 [0x1031]. Bus 0, device 16, function 0: Serial controller: Unknown vendor Unknown device (rev 1). Vendor id=12b9. Device id=1008. Medium devsel. IRQ 9. I/O at 0x1040 [0x1041]. Bus 1, device 0, function 0: VGA compatible controller: 3Dfx Unknown device (rev 1). Vendor id=121a. Device id=5. Fast devsel. Fast back-to-back capable. IRQ 11. Non-prefetchable 32 bit memory at 0xf6000000 [0xf6000000]. Prefetchable 32 bit memory at 0xfc000000 [0xfc000008]. I/O at 0x9000 [0x9001]. -------------------------------------- Below is my file "/proc/interrupts": CPU0 0: 37867 XT-PIC timer 1: 581 XT-PIC keyboard 2: 0 XT-PIC cascade 8: 1 XT-PIC rtc 12: 1591 XT-PIC PS/2 Mouse 13: 1 XT-PIC fpu 14: 9125 XT-PIC ide0 15: 12 XT-PIC ide1 NMI: 0 -------------------------------------- Below is my file "/proc/ioports": 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0070-007f : rtc 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 0376-0376 : ide1 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial(auto) 1020-1027 : ide0 1028-102f : ide1 1040-1047 : serial(set) --------------------------------------