RE: [newbie] adaptec scsi aha152x
Hello, I'm not very sure, but /dev/scd0 is a special device, so it must be mount on a directory (mount -t filesystem /dev/scdo /directory and add the line in /etc/fstab : /dev/directory ext2 noauto,dev=/dev/scd0,... or something like this, look at the other lines ;-)). Didier -Message d'origine- De : Joe St.Clair - KSI Machine Engineering [mailto:[EMAIL PROTECTED]] Envoye : jeudi 29 juin 2000 22:25 A : [EMAIL PROTECTED] Objet : Re: [newbie] adaptec scsi aha152x I tried this on my 1542cf with no success. The closest I have come is if I type linux at the prompt that comes up with the 7.1 cdrom install disk. Then if I just follow the basics and let it autoprobe it finds the SCSI card and all 4 SCSI devices that I have on the system (1 cdrom and 3 drives). But the stinking install still can't mount /dev/scd0. It seems the location the script is attempting to mount is none existent. Didier Galland wrote: Hello, I have an adaptec aha152b. It work fine with these settings aha152x=0x340,11,7,1 (IO base, DMA, SCSI ID, parity) Try modprobe aha152x aha152x=0x340,11,7,1 [set the values according to your system] Then, if it works, enter the line in rc.local OR Reinstall (update) and enter the settings when asked. I hope this will be helpful. Didier -Message d'origine- De : William Fisher [mailto:[EMAIL PROTECTED]] Envoye : jeudi 29 juin 2000 01:46 A : [EMAIL PROTECTED] Objet : Re: [newbie] adaptec scsi aha152x My SCSI card was not recognized on the install of Man 7.0 It works on Win98 and on Caldera 2.2 It's adaptec AHA-150x/1510/152x/AIC-6x60 I tried entering the io=0x140 irq=10 after the auto recognition failed, but no luck there. Also, the install book doesnt seem to indicate how to set up SCSI later if I do complete the rest of the installation. Suggestions appreciated. Bill __ message envoye depuis http://www.ifrance.com emails (pop)-sites persos (espace illimite)-agenda-favoris (bookmarks)-forums Ecoutez ce message par tel ! : 08 92 68 92 15 (france uniquement)
RE: [newbie] adaptec scsi aha152x
Hello, I have an adaptec aha152b. It work fine with these settings aha152x=0x340,11,7,1 (IO base, DMA, SCSI ID, parity) Try modprobe aha152x aha152x=0x340,11,7,1 [set the values according to your system] Then, if it works, enter the line in rc.local OR Reinstall (update) and enter the settings when asked. I hope this will be helpful. Didier -Message d'origine- De : William Fisher [mailto:[EMAIL PROTECTED]] Envoye : jeudi 29 juin 2000 01:46 A : [EMAIL PROTECTED] Objet : Re: [newbie] adaptec scsi aha152x My SCSI card was not recognized on the install of Man 7.0 It works on Win98 and on Caldera 2.2 It's adaptec AHA-150x/1510/152x/AIC-6x60 I tried entering the io=0x140 irq=10 after the auto recognition failed, but no luck there. Also, the install book doesnt seem to indicate how to set up SCSI later if I do complete the rest of the installation. Suggestions appreciated. Bill __ message envoye depuis http://www.ifrance.com emails (pop)-sites persos (espace illimite)-agenda-favoris (bookmarks)-forums Ecoutez ce message par tel ! : 08 92 68 92 15 (france uniquement)
Re: [newbie] adaptec scsi aha152x
Thanks Didier for the reply I tried the modprobe, no luck, so I reinstalled. This time just entered 0140,10,7,1 at the SCSI setup option. (the install book not clear here) Only other problem was that I needed to edit /etc/fstab to change the /mnt/zip from the vfat automatically set up to ext2 for linux.. I can access zip disk OK. Another question tho - there doesnt seem to be any way with this system to mount the zip drive on the desktop by right-clicking the zip icon. There seems to be only one icon showing, for either a mounted or unmounted zip drive. I edited /etc/fstab to make the zip and floppy drives noauto for mounting. Bill Hello, I have an adaptec aha152b. It work fine with these settings aha152x=0x340,11,7,1 (IO base, DMA, SCSI ID, parity) Try modprobe aha152x aha152x=0x340,11,7,1 [set the values according to your system] Then, if it works, enter the line in rc.local OR Reinstall (update) and enter the settings when asked. I hope this will be helpful. Didier -Message d'origine- De : William Fisher [mailto:[EMAIL PROTECTED]] Envoye : jeudi 29 juin 2000 01:46 A : [EMAIL PROTECTED] Objet : Re: [newbie] adaptec scsi aha152x My SCSI card was not recognized on the install of Man 7.0 It works on Win98 and on Caldera 2.2 It's adaptec AHA-150x/1510/152x/AIC-6x60 I tried entering the io=0x140 irq=10 after the auto recognition failed, but no luck there. Also, the install book doesnt seem to indicate how to set up SCSI later if I do complete the rest of the installation. Suggestions appreciated. Bill __ message envoye depuis http://www.ifrance.com emails (pop)-sites persos (espace illimite)-agenda-favoris (bookmarks)-forums Ecoutez ce message par tel ! : 08 92 68 92 15 (france uniquement) -- Joe St.Clair - KSI Machine Engineering
