Re: [newbie] k3b update to 0.11?
On Fri, 06 Feb 2004 10:38:00 -0300 Angus Auld [EMAIL PROTECTED] wrote: Thank you David, yes I got a src rpm for k3b 0.11 here: ftp://mandrake.contactel.cz/people/bibri/mandrake/9.2/SRPMS/ I had to install a few dependency packages to allow me to rebuild, but I did get it to do so, and all is well. :-) Hmm. Maybe I'll follow my own advice and try a srpm for this cooker box for k3b. Right now, it's not at all usable. I probably should disable supermount, as every time I insert a blank CD for burning, it's chatter chatter chatter and burp and up pops k3B. Try to do anything with it - like open a new audio project - blam, drkonqi crash. Then I get to go to a root console and do cdrecord, which is what I wanted to do in the first place. On the positive side, I burned 2 cds at 32x speed with -dev ATA yesterday. I had to wash them off, cause they were Staind. (grin) Best regards. --Angus -- David E. Fox Thanks for letting me [EMAIL PROTECTED]change magnetic patterns [EMAIL PROTECTED] on your hard disk. --- Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] k3b update to 0.11?
On Mon, 2004-02-16 at 11:28, David E. Fox wrote: On Fri, 06 Feb 2004 10:38:00 -0300 Angus Auld [EMAIL PROTECTED] wrote: Thank you David, yes I got a src rpm for k3b 0.11 here: ftp://mandrake.contactel.cz/people/bibri/mandrake/9.2/SRPMS/ I had to install a few dependency packages to allow me to rebuild, but I did get it to do so, and all is well. :-) Hmm. Maybe I'll follow my own advice and try a srpm for this cooker box for k3b. Right now, it's not at all usable. I probably should disable supermount, as every time I insert a blank CD for burning, it's chatter chatter chatter and burp and up pops k3B. Try to do anything with it - like open a new audio project - blam, drkonqi crash. Then I get to go to a root console and do cdrecord, which is what I wanted to do in the first place. On the positive side, I burned 2 cds at 32x speed with -dev ATA yesterday. I had to wash them off, cause they were Staind. (grin) I did a stupid thing I wound up with melted chocolate in the burner (don't ask) Best regards. --Angus Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] k3b update to 0.11?
On Mon, 2004-02-16 at 18:33, Aron Smith wrote: On Mon, 2004-02-16 at 11:28, David E. Fox wrote: On Fri, 06 Feb 2004 10:38:00 -0300 Angus Auld [EMAIL PROTECTED] wrote: Thank you David, yes I got a src rpm for k3b 0.11 here: ftp://mandrake.contactel.cz/people/bibri/mandrake/9.2/SRPMS/ I had to install a few dependency packages to allow me to rebuild, but I did get it to do so, and all is well. :-) Hmm. Maybe I'll follow my own advice and try a srpm for this cooker box for k3b. Right now, it's not at all usable. I probably should disable supermount, as every time I insert a blank CD for burning, it's chatter chatter chatter and burp and up pops k3B. Try to do anything with it - like open a new audio project - blam, drkonqi crash. Then I get to go to a root console and do cdrecord, which is what I wanted to do in the first place. On the positive side, I burned 2 cds at 32x speed with -dev ATA yesterday. I had to wash them off, cause they were Staind. (grin) I did a stupid thing I wound up with melted chocolate in the burner (don't ask) Don't you like hot chocolate ??!! -- josenildo marques icq #289971493 homepage http://cyb.ezdir.net registered linux user #341648 * Study the past if you would define the future. Confucius Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] k3b update to 0.11?
On Mon, 2004-02-16 at 14:50, Josenildo Marques wrote: On Mon, 2004-02-16 at 18:33, Aron Smith wrote: On Mon, 2004-02-16 at 11:28, David E. Fox wrote: On Fri, 06 Feb 2004 10:38:00 -0300 Angus Auld [EMAIL PROTECTED] wrote: Thank you David, yes I got a src rpm for k3b 0.11 here: ftp://mandrake.contactel.cz/people/bibri/mandrake/9.2/SRPMS/ I had to install a few dependency packages to allow me to rebuild, but I did get it to do so, and all is well. :-) Hmm. Maybe I'll follow my own advice and try a srpm for this cooker box for k3b. Right now, it's not at all usable. I probably should disable supermount, as every time I insert a blank CD for burning, it's chatter chatter chatter and burp and up pops k3B. Try to do anything with it - like open a new audio project - blam, drkonqi crash. Then I get to go to a root console and do cdrecord, which is what I wanted to do in the first place. On the positive side, I burned 2 cds at 32x speed with -dev ATA yesterday. I had to wash them off, cause they were Staind. (grin) I did a stupid thing I wound up with melted chocolate in the burner (don't ask) Don't you like hot chocolate ??!! yes but the burner didnt had to take it apart and clean the lens (between disk 1 and disk 2 while upgrading ) Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] k3b update to 0.11?
- Original Message - From: David E. Fox [EMAIL PROTECTED] Date: Thu, 5 Feb 2004 21:28:53 -0800 To: [EMAIL PROTECTED] Subject: Re: [newbie] k3b update to 0.11? On Wed, 04 Feb 2004 15:46:46 -0300 Angus Auld [EMAIL PROTECTED] wrote: Now, the only libk3b1-0.11 package I can find is, libk3b1-0.11.1-3mdk.alpha.rpm, which is a cooker package. David E. Fox did divulge: It very well may be, but that's not the problem. The problem is that it's an alpha RPM; not alpha in the sense of testing, but alpha in the sense of a vastly underrated and underused microprocessor that you might not have. In short, it's not an intel :). You might wait for Charles to update his rpms and use his site. I've had some success with his packages when others would not function (new gimp comes to mind). If you have trouble using the binary RPMs, you might elect to download the source rpms and do an rpm --rebuild -- for the latest gimp, that was what I had to do. ** Thank you David, yes I got a src rpm for k3b 0.11 here: ftp://mandrake.contactel.cz/people/bibri/mandrake/9.2/SRPMS/ I had to install a few dependency packages to allow me to rebuild, but I did get it to do so, and all is well. :-) Best regards. --Angus Let us not look back in anger or forward in fear, but around in awareness. -- James Thurber *** ~Linux Powered by Mandrake 9.2~ *** ~Reg. Linux User #278931~ *** -- _ Web-based SMS services available at http://www.operamail.com. From your mailbox to local or overseas cell phones. Powered by Outblaze Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] k3b update to 0.11?
--- Angus Auld [EMAIL PROTECTED] wrote: Greetings, I am wondering if any k3b users here have tried to upgrade to the latest release 0.11? I found a binary package for Mdk9.2 here: http://www.k3b.org/ but, when I try to install, urpmi tells me there is conflicting file in the package, libk3b1-0.9-10mdk. Now, the only libk3b1-0.11 package I can find is, libk3b1-0.11.1-3mdk.alpha.rpm, which is a cooker package. I know full well that it is taboo to use cooker stuff on a non-cooker installation, but, I will ask anyway. ;-) Is it OK to install this libk3b1-0.11 package? It looks to me like k3b is the only thing using this lib package. Urpmi tells me that it can be installed. Should I just leave well enough alone? Am I tempting fate and trying to break my system? Please advise. TIA for any help. Best regards to all. --Angus I managed to get k3b .11 installed just fine on 9.2, but for the life of me cannot remember where I got the package from, sorry. Checking my database the package was k3b-0.11-db. Also, there is an rpm for k3b available here: ftp://mandrake.contactel.cz/people/bibri/mandrake/9.2/RPMS/ I haven't tested it, but chances are it should work. __ Do you Yahoo!? Yahoo! Finance: Get your refund fast by filing online. http://taxes.yahoo.com/filing.html Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] k3b update to 0.11?
Original Message - From: Charles A Edwards [EMAIL PROTECTED] Date: Wed, 4 Feb 2004 16:23:18 -0500 To: [EMAIL PROTECTED] Subject: Re: [newbie] k3b update to 0.11? On Wed, 04 Feb 2004 15:46:46 -0300 Angus Auld [EMAIL PROTECTED] wrote: Should I just leave well enough alone? Am I tempting fate and trying to break my system? Please advise. If using a gui I, myself, prefer either x-cd-roast or eroaster. After having my fstab scrambled by k3b several releases ago I never touched it again. With that preamble out of the way, if you can wait until tomorrow I will rebuild for 9.2 and upload to my site k3b-0.11.1-4mdk, which will be actual mdk rpms and not the wanna-bes that is on the k3b site. Charles Thanks Charles, and Bryan, I appreciate your help/advice. I will perhaps do a urpmi --test on the 9.1 package that Bryan's url points to. I will get your rebuilt for 9.2 package Charles, as soon as you have it ready. :-) Will you also have to do the libk3b1 package? Thanks again guys. Best regards. --Angus Let us not look back in anger or forward in fear, but around in awareness. -- James Thurber *** ~Linux Powered by Mandrake 9.2~ *** ~Reg. Linux User #278931~ *** -- _ Web-based SMS services available at http://www.operamail.com. From your mailbox to local or overseas cell phones. Powered by Outblaze Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] k3b update to 0.11?
- Original Message - From: Job Evers [EMAIL PROTECTED] Date: Wed, 4 Feb 2004 23:01:21 -0800 (PST) To: [EMAIL PROTECTED] Subject: Re: [newbie] k3b update to 0.11? --- Angus Auld [EMAIL PROTECTED] wrote: Greetings, I am wondering if any k3b users here have tried to upgrade to the latest release 0.11? I found a binary package for Mdk9.2 here: http://www.k3b.org/ but, when I try to install, urpmi tells me there is conflicting file in the package, libk3b1-0.9-10mdk. Now, the only libk3b1-0.11 package I can find is, libk3b1-0.11.1-3mdk.alpha.rpm, which is a cooker package. I know full well that it is taboo to use cooker stuff on a non-cooker installation, but, I will ask anyway. ;-) Is it OK to install this libk3b1-0.11 package? It looks to me like k3b is the only thing using this lib package. Urpmi tells me that it can be installed. Should I just leave well enough alone? Am I tempting fate and trying to break my system? Please advise. TIA for any help. Best regards to all. --Angus Job Evers did divulge: I managed to get k3b .11 installed just fine on 9.2, but for the life of me cannot remember where I got the package from, sorry. Checking my database the package was k3b-0.11-db. Also, there is an rpm for k3b available here: ftp://mandrake.contactel.cz/people/bibri/mandrake/9.2/RPMS/ I haven't tested it, but chances are it should work. Thanks Job Evers for your reply, and the link to the ftp site with the Mdk rpms. :-) Nice find! Best regards to you. --Angus Let us not look back in anger or forward in fear, but around in awareness. -- James Thurber *** ~Linux Powered by Mandrake 9.2~ *** ~Reg. Linux User #278931~ *** -- _ Web-based SMS services available at http://www.operamail.com. From your mailbox to local or overseas cell phones. Powered by Outblaze Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[newbie] k3b update to 0.11?
Greetings, I am wondering if any k3b users here have tried to upgrade to the latest release 0.11? I found a binary package for Mdk9.2 here: http://www.k3b.org/ but, when I try to install, urpmi tells me there is conflicting file in the package, libk3b1-0.9-10mdk. Now, the only libk3b1-0.11 package I can find is, libk3b1-0.11.1-3mdk.alpha.rpm, which is a cooker package. I know full well that it is taboo to use cooker stuff on a non-cooker installation, but, I will ask anyway. ;-) Is it OK to install this libk3b1-0.11 package? It looks to me like k3b is the only thing using this lib package. Urpmi tells me that it can be installed. Should I just leave well enough alone? Am I tempting fate and trying to break my system? Please advise. TIA for any help. Best regards to all. --Angus Let us not look back in anger or forward in fear, but around in awareness. -- James Thurber *** ~Linux Powered by Mandrake 9.2~ *** ~Reg. Linux User #278931~ *** -- _ Web-based SMS services available at http://www.operamail.com. From your mailbox to local or overseas cell phones. Powered by Outblaze Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [newbie] k3b update to 0.11?
On Wed, 04 Feb 2004 15:46:46 -0300 Angus Auld [EMAIL PROTECTED] wrote: Should I just leave well enough alone? Am I tempting fate and trying to break my system? Please advise. If using a gui I, myself, prefer either x-cd-roast or eroaster. After having my fstab scrambled by k3b several releases ago I never touched it again. With that preamble out of the way, if you can wait until tomorrow I will rebuild for 9.2 and upload to my site k3b-0.11.1-4mdk, which will be actual mdk rpms and not the wanna-bes that is on the k3b site. Charles -- I'm pretending that we're all watching PHIL SILVERS instead of RICARDO MONTALBAN! - Mandrake Linux 10.0 on PurpleDragon 2.6.2-0.rc2.1.tmb.2mdkenterprise http://www.eslrahc.com - pgp0.pgp Description: PGP signature
Re: [newbie] k3b update to 0.11?
On Wednesday 04 February 2004 01:46 pm, Angus Auld wrote: Greetings, I am wondering if any k3b users here have tried to upgrade to the latest release 0.11? I have. But I am using 9.1 so I didn't have any dependency problems moving up to .11. I found a binary package for Mdk9.2 here: http://www.k3b.org/ but, when I try to install, urpmi tells me there is conflicting file in the package, libk3b1-0.9-10mdk. You might want to try the 9.1 package at http://nzlinux.orcon.net.nz/rpms/k3b-0.11.1-1.i586.rpm and see if it works better for you. -- Bryan Phinney Software Test Engineer Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
