Hi, I've a problem with the kernel 2.2.5-15 (installed from kpackage, I believe is kernel-2.2.5-15.i386.rpm). This kernel (2.2.5-mk5 works reguraly) hang my cdrw yamaha 4416E bios 1.0b on SuperMicro P6SBA. Temporaly it's seem resolved by removing /dev/cd* but I mail you file that can be usefull to fix it (file0.txt before changing - file1.txt after changing) The strange error is more more frequently on burned CD respect the silver. _________________________________________________________ DO YOU YAHOO!? Il tuo indirizzo gratis e per sempre @yahoo.it su http://mail.yahoo.it
--- Loaded modules --- [root@localhost /root]# lsmod Module Size Used by nls_iso8859-1 2020 1 (autoclean) nls_cp437 3548 1 (autoclean) vfat 11420 1 (autoclean) fat 25344 1 (autoclean) [vfat] es1370 22140 0 soundcore 2404 4 [es1370] --- List of /dev/cd* --- [root@localhost /root]# cd /dev [root@localhost /dev]# ls cd* brw-rw---- 2 root 22, 64 mag 5 1998 cdrom lrwxrwxrwx 1 root 8 mag 16 20:37 cdrw -> /dev/hdc brw-rw-r-- 1 root 15, 0 mag 5 1998 cdu31a brw-r----- 1 root 24, 0 mag 5 1998 cdu535 read the file dmesg0.txt to see the boot --- Error on mount /dev/hdc --- [root@localhost /dev]# mnt /mnt/cdrw hdc: packet command error: status=0x51 { DriveReady SeekComplete Error } hdc: packet command error: error=0x00 ATAPI device hdc: Error: Unit attention -- (Sense key=0x06) Not ready to ready transition, medium may have changed -- (asc=0x28, ascq=0x00) The failed "Test Unit Ready" packet command was: "00 00 00 00 00 00 00 00 00 00 00 00 " --- Error on reading /dev/hdc --- [root@localhost /dev]# cd /mnt/cdrw [root@localhost /dev]# ls -r * | less hdc: irq timeout: status=0xd0 { Busy } hdc: ATAPI reset timed-out, status=0x80 ide1: reset timed-out, status=0x80 hdc: status timeout: status=0x80 { Busy } hdc: drive not ready for command
Linux version 2.2.5-15 ([EMAIL PROTECTED]) (gcc version egcs-2.91.66 19990314/Linux (egcs-1.1.2 release)) #1 Mon Apr 19 23:00:46 EDT 1999 Detected 334098118 Hz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 333.41 BogoMIPS Memory: 63140k/65536k available (996k kernel code, 412k reserved, 928k data, 60k init) VFS: Diskquotas version dquot_6.4.0 initialized CPU: Intel Pentium II (Deschutes) stepping 02 Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v1.26 (19981001) Richard Gooch ([EMAIL PROTECTED]) PCI: PCI BIOS revision 2.10 entry at 0xfdb81 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Enabling I/O for device 00:3a Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Unix domain sockets 1.0 for Linux NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP Initializing RT netlink socket Starting kswapd v 1.5 Detected PS/2 Mouse Port. Serial driver version 4.27 with MANY_PORTS MULTIPORT SHARE_IRQ enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A pty: 256 Unix98 ptys configured apm: BIOS version 1.2 Flags 0x03 (Driver version 1.9) Real Time Clock Driver v1.09 RAM disk driver initialized: 16 RAM disks of 4096K size PIIX4: IDE controller on PCI bus 00 dev 39 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA hda: SAMSUNG SV0432A, ATA DISK drive hdb: WDC AC36400L, ATA DISK drive hdc: YAMAHA CRW4416E, ATAPI CDROM drive hdd: LTN301, ATAPI CDROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: SAMSUNG SV0432A, 4112MB w/482kB Cache, CHS=784/255/63 hdb: WDC AC36400L, 6149MB w/256kB Cache, CHS=784/255/63 hdc: ATAPI 16X CD-ROM DVD-RAM CD-R/RW drive, 2048kB Cache Uniform CDROM driver Revision: 2.54 hdd: ATAPI 32X CD-ROM drive, 120kB Cache Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12 raid5: measuring checksumming speed raid5: using high-speed MMX checksum routine pII_mmx : 813.054 MB/sec p5_mmx : 787.908 MB/sec 8regs : 575.691 MB/sec 32regs : 413.766 MB/sec using fastest function: pII_mmx (813.054 MB/sec) scsi : 0 hosts. scsi : detected total. md.c: sizeof(mdp_super_t) = 4096 Partition check: hda: hda1 hda2 hda3 < hda5 > hdb: hdb1 hdb2 hdb3 hdb4 < hdb5 hdb6 > autodetecting RAID arrays autorun ... ... autorun DONE. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 60k freed Adding Swap: 144548k swap-space (priority -1) es1370: version v0.19 time 21:48:00 Apr 19 1999 es1370: found adapter at io 0xef00 irq 10 es1370: features: joystick off, line in, mic impedance 0 hdc: packet command error: status=0x51 { DriveReady SeekComplete Error } hdc: packet command error: error=0x00 ATAPI device hdc: Error: Unit attention -- (Sense key=0x06) Not ready to ready transition, medium may have changed -- (asc=0x28, ascq=0x00) The failed "Test Unit Ready" packet command was: "00 00 00 00 00 00 00 00 00 00 00 00 " VFS: Disk change detected on device ide1(22,0) ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A
--- Loaded modules --- [root@localhost /root]# lsmod Module Size Used by nls_iso8859-1 2020 1 (autoclean) nls_cp437 3548 1 (autoclean) vfat 11420 1 (autoclean) fat 25344 1 (autoclean) [vfat] es1370 22140 0 soundcore 2404 4 [es1370] --- I've removed all cd* devices --- [root@localhost /root]# ls /dev/cd* ls: /dev/cd*: No such file or directory --- Error on mount /dev/hdc --- [root@localhost /root]# mnt /mnt/cdrw hdc: packet command error: status=0x51 { DriveReady SeekComplete Error } hdc: packet command error: error=0x00 ATAPI device hdc: Error: Unit attention -- (Sense key=0x06) Not ready to ready transition, medium may have changed -- (asc=0x28, ascq=0x00) The failed "Test Unit Ready" packet command was: "00 00 00 00 00 00 00 00 00 00 00 00 "