Re: [newbie] need help on DSL with LM7.2
Install rp-pppoe. All you will need to know for that install is your user name, password, and what eth card you will be using. In my case Imade sure I chose eth0, which is the only eth card in my box. When asked for a DNSnumber type 'server'. Choose 1,2,or 3 for the built in firewalling. Then, in a terminal type 'adsl-start' and see if you can move about the web. It's that simple. Glenn Johnson [EMAIL PROTECTED] Registered Linux User #175132 Powered by Linux Mandrake 7.1!
Re: [newbie] need help on DSL with LM7.2
I do have static ip and gateway, I also tried both with ppoe and withuot pppoe in DSL network of Drakeconf I also tried adsl-start pppoe(timeout) but still failed I can see my eth0 by ifconfig my kernel is 2.2.17, DSL modem is Cisco 678 isp is qwest not work need help Anthony wrote: I might be wrong in your case, but I'm using a 675, and did not use pppoe. This may be where the trouble lies. Anthony eric wrote: I had Qwest.net 's Cisco 678 dsl modem and intel ethernet card, my isp told me my scriber line is on and three green light on dsl modem (lnk of wan and lan adn power) os keep on with yellow flash light on ACT of wan and lan I tried to use DrakeConfig and pppoe wtih dhcp still get error The ysstem does not seem to be connected to internet Try to reconfigure your connect my isp told me in window platform I should check gateway/route as 10.0.0.1, how it mean to linux? need help Sincere eric
Re: [newbie] need help on DSL with LM7.2
the issue is in the netconf setting I expect. With a static IP and access throgh a nic/modem setup... ppoe is not needed. Set it up as a standard network. I did so for both home and office on Pacbell's flavor of DSL for almost 2 years. I am now trying to futz with a cable modem... pumpd does not work right on 7.1. my 2 cents. Steelhead. - Original Message - From: eric [EMAIL PROTECTED] To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Sent: Wednesday, February 23, 2000 12:13 AM Subject: Re: [newbie] need help on DSL with LM7.2 I do have static ip and gateway, I also tried both with ppoe and withuot pppoe in DSL network of Drakeconf I also tried adsl-start pppoe(timeout) but still failed I can see my eth0 by ifconfig my kernel is 2.2.17, DSL modem is Cisco 678 isp is qwest not work need help Anthony wrote: I might be wrong in your case, but I'm using a 675, and did not use pppoe. This may be where the trouble lies. Anthony eric wrote: I had Qwest.net 's Cisco 678 dsl modem and intel ethernet card, my isp told me my scriber line is on and three green light on dsl modem (lnk of wan and lan adn power) os keep on with yellow flash light on ACT of wan and lan I tried to use DrakeConfig and pppoe wtih dhcp still get error The ysstem does not seem to be connected to internet Try to reconfigure your connect my isp told me in window platform I should check gateway/route as 10.0.0.1, how it mean to linux? need help Sincere eric
Re: [newbie] need help on DSL with LM7.2
so dyou mean i should click network infomation System then how do I fill in NIS domain and NIS server? I ever go to my isp 's web to configure static ip and domain, configure Forward DNS Records it ask me to fill in fully qualifed hostmanme then I fill in myLoginName.qwest.net but it response error , domain is not assigned to you I am using kernel 2.2.17 with dsl modem cisco 678 need help again sincere eric Steelhead wrote: the issue is in the netconf setting I expect. With a static IP and access throgh a nic/modem setup... ppoe is not needed. Set it up as a standard network. I did so for both home and office on Pacbell's flavor of DSL for almost 2 years. I am now trying to futz with a cable modem... pumpd does not work right on 7.1. my 2 cents. Steelhead. - Original Message - From: eric [EMAIL PROTECTED] To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Sent: Wednesday, February 23, 2000 12:13 AM Subject: Re: [newbie] need help on DSL with LM7.2 I do have static ip and gateway, I also tried both with ppoe and withuot pppoe in DSL network of Drakeconf I also tried adsl-start pppoe(timeout) but still failed I can see my eth0 by ifconfig my kernel is 2.2.17, DSL modem is Cisco 678 isp is qwest not work need help Anthony wrote: I might be wrong in your case, but I'm using a 675, and did not use pppoe. This may be where the trouble lies. Anthony eric wrote: I had Qwest.net 's Cisco 678 dsl modem and intel ethernet card, my isp told me my scriber line is on and three green light on dsl modem (lnk of wan and lan adn power) os keep on with yellow flash light on ACT of wan and lan I tried to use DrakeConfig and pppoe wtih dhcp still get error The ysstem does not seem to be connected to internet Try to reconfigure your connect my isp told me in window platform I should check gateway/route as 10.0.0.1, how it mean to linux? need help Sincere eric
[newbie] need help on DSL with LM7.2
I had Qwest.net 's Cisco 678 dsl modem and intel ethernet card, my isp told me my scriber line is on and three green light on dsl modem (lnk of wan and lan adn power) os keep on with yellow flash light on ACT of wan and lan I tried to use DrakeConfig and pppoe wtih dhcp still get error The ysstem does not seem to be connected to internet Try to reconfigure your connect my isp told me in window platform I should check gateway/route as 10.0.0.1, how it mean to linux? need help Sincere eric
