Re: RE: [newbie] Got everything else to work but still no CDRW
Hi Paul and Jim, Paul Fuggle wrote on 31.10.00 0:34: when you execute 'cdrecord -scanbus' as root does it list your CDRW as a SCSI device? You have not mentioned anything regarding appending 'hdc=ide-scsi' to your kernel boot command. Yes, I guess it's a requirement. But it can be not enough. ... -Original Message- From: Jim Weimer [mailto:[EMAIL PROTECTED] ] Sent: 30 October 2000 00:01 To: [EMAIL PROTECTED] m Subject: [newbie] Got everything else to work but still no CDRW I'm haveing problems accessing the CDRW on a recent install of Mandrake 7.1 on a 166Hz pentium with 64 meg ram. When I try to open the folder I receive the following message-Could not list directory contents file:/mnt/cdrom. Yes a CD is in the drive and yes it is a data CD the Linux mandrake 7.1 install disk. If I umount then try to mount scd0 the system tells me it is not a block device. The following is the existing system and files. fstab ... /mnt/cdrom /mnt/cdrom supermount fs=iso9660,dev=/dev/scd0 I'm not sure about device as you set the link '/dev/cdrom correctly (below). ... I changed cdrom super mount from /mnt/cdrom /mnt/cdrom supermount fs=iso9660,dev=/dev/cdro m 0 0 Conf.modules alias block-major-11 scsi_hostadapter I use Sony CRX-100E and I don't have this item in my 'conf.modules'. I'm not sure but this may cause the problem. alias scsi_hostadapter ide-scsi ... modprobe scsi_hostadapter alias sound sb ... dmesg-in part . . hdc: Hewlett-Packard CD-Writer Plus 8100, ATAPI CDROM drive . . hdc: ATAPI 24X CD-ROM CD-R/RW drive, 1024kB Cache Uniform CDROM driver Revision: 2.56 . . scsi0 : SCSI host adapter emulation for IDE ATAPI devices scsi : 1 host. Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996 SB 4.13 detected OK (220) . . I entered the following command- cd /dev/ rm cdrom ln -s scd0 cdrom then "y" to confirm deletion of prior link. The command insmod ide-scsi resonds with Using /lib/modules/2.2.15-4mdk/s csi/ide-scsi0 insmod: a module names ide-scsi already exits And what 'cat /proc/devices' says? Does it list 'sr' under block devices section? I do not use Lilo, Grub is installed as default in Mandrake 7.1 but its on the first partition not the master boot record to keep it from trashing EZ Bios on hda. I use loadlin from the DOS C: prompt via a .bat file to boot linux. Linux is on hdb. the command modprobe ide-scsi responds with- note: /etc/conf.modules is more recent than /lib/modules/2.2.15.4 mdk/modules.dep the command modprobe scsi_hostadapter resonds with the same message I have finally managed with your help,I read the archives, to get my sound card and USR 56 modem working. The CDRW is my last stumbling block and I can't seem to get it on my own. thanks in advance Jim Please see comments above... It sounds pretty strange. I can make just a couple of remarks: 1) 'hdc=ide-scsi' should be added to kernel loading parameters. I don't know how to do it with 'loadlin' though. 2) The first line in 'conf.modules' looks rather suspicious. I would try to remove it temporary just to make a try. 3) Add line 'ide-scsi' to '/etc/modules'. 4) Set permissions to '666' or even something more relaxed on both '/dev/cdrom' and '/dev/scd0'. Hope it helps. Serge
RE: [newbie] Got everything else to work but still no CDRW
when you execute 'cdrecord -scanbus' as root does it list your CDRW as a SCSI device? You have not mentioned anything regarding appending 'hdc=ide-scsi' to your kernel boot command. after changing your conf.modules file you must run 'depmod'. -Original Message- From: Jim Weimer [mailto:[EMAIL PROTECTED]] Sent: 30 October 2000 00:01 To: [EMAIL PROTECTED] Subject: [newbie] Got everything else to work but still no CDRW I'm haveing problems accessing the CDRW on a recent install of Mandrake 7.1 on a 166Hz pentium with 64 meg ram. When I try to open the folder I receive the following message-Could not list directory contents file:/mnt/cdrom. Yes a CD is in the drive and yes it is a data CD the Linux mandrake 7.1 install disk. If I umount then try to mount scd0 the system tells me it is not a block device. The following is the existing system and files. fstab /dev/hdb1 / ext2 defaults 1 1 none /dev/pts devpts mode=0620 0 0 /dev/hdb5 /home ext2 defaults 1 2 /mnt/cdrom /mnt/cdrom supermount fs=iso9660,dev=/dev/scd0 0 0 0 /mnt/floppy /mnt/floppy supermount fs=vfat,dev=/dev/fd0 0 0 /dev/hda1 /mnt/Cadillac vfat user,exec,unmask=0 0 0 none /proc proc defaults 0 0 /dev/hdb6 swap swap defaults 0 0 I changed cdrom super mount from /mnt/cdrom /mnt/cdrom supermount fs=iso9660,dev=/dev/cdrom 0 0 Conf.modules alias block-major-11 scsi_hostadapter alias scsi_hostadapter ide-scsi alias parport_lowlevel parport_pc pre-install pcmcia_core /etc/rc.d/init.d/pcmcia start pre-install plip modprobe parport_pc ; echo 7 /proc/parport/0/irq post-install supermount modprobe scsi_hostadapter alias sound sb options sb io=0x220 irq=5 dma=1 dma16=5 mpu_io=0x300 dmesg-in part . . hdc: Hewlett-Packard CD-Writer Plus 8100, ATAPI CDROM drive . . hdc: ATAPI 24X CD-ROM CD-R/RW drive, 1024kB Cache Uniform CDROM driver Revision: 2.56 . . scsi0 : SCSI host adapter emulation for IDE ATAPI devices scsi : 1 host. Soundblaster audio driver Copyright (C) by Hannu Savolainen 1993-1996 SB 4.13 detected OK (220) . . I entered the following command- cd /dev/ rm cdrom ln -s scd0 cdrom then "y" to confirm deletion of prior link. The command insmod ide-scsi resonds with Using /lib/modules/2.2.15-4mdk/scsi/ide-scsi0 insmod: a module names ide-scsi already exits I do not use Lilo, Grub is installed as default in Mandrake 7.1 but its on the first partition not the master boot record to keep it from trashing EZ Bios on hda. I use loadlin from the DOS C: prompt via a .bat file to boot linux. Linux is on hdb. the command modprobe ide-scsi responds with- note: /etc/conf.modules is more recent than /lib/modules/2.2.15.4 mdk/modules.dep the command modprobe scsi_hostadapter resonds with the same message I have finally managed with your help,I read the archives, to get my sound card and USR 56 modem working. The CDRW is my last stumbling block and I can't seem to get it on my own. thanks in advance Jim