Re: [newbie] Still sound problem
Jordan wrote: I'm not having much luck with sound. I installed Mandrake onto another computer (where again W98 has sound), and I get the same sort of error messages - seem to point to INT and I/O conflicts. Thing is, whatever combination of these I try, sound doesn't work. Nor does it help to allow the BIOS to automatically organise the PNP/ISA settings. I know at least one other person on the list has been having the same problem recently. Not much documentation on this subject to be found. Tried: hardrake sndconfig modprobe Lucky it's a rainy weekend. Anyone had this problem and fixed it? Quite likely, you've diagnosed the problem correctly. On many motherboards, the pci slots have IRQ's assigned to them. With Windows, this usually isn't a problem, because Win allows IRQ sharing with most devices. There are some exceptions, but generally, that is true. Linux doesn't share IRQ's, so if you have a card in a slot that is assigned IRQ 10 and your ethernet card in another slot requires IRQ 10 and the slot is assigned 10 and 11 and your video card uses 11, well, you can see what happens. Some motherboards simply will not allow you to change IRQ settings for particular slots--you're stuck. The only solution is to move the offending card to another slot, hopefully you have a free one and something else doesn't require the IRQ that is assigned to that one. Now that we have so many devices in our boxes this is a really common occurance. I just ran into it with the above ethernet example. No way the card could share an IRQ, and all my pci slots were filled. Moving cards didn't work, but if I pulled my modem card it would work. I finally installed an ISA card.
RE: [newbie] still sound...
dear mr. smith does your problem like this one if it is so you can do what Aric told me and my yamaha sc now is working Salam, Amin Yuliastanto === Yes, thank you very much Aric right know I listening xmms playing Sugar Ray-Every Morning.mp3 cool.. Salam, Amin Yuliastanto -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Aric S. Bergren Sent: 21 Desember 2000 3:05 To: [EMAIL PROTECTED] Subject: Re: [newbie] Help with soundcard HI All!!! First get out of x-windows by going to the shutdown section and selecting console mode..(after it boots into it you may have to press enter to get a login prompt)log in as rootand then run sndconfig.i had the same problem and this worked like a charm, and you get to hear linus torvalds pronounce linux! Good luck!!! Amin Yuliastanto wrote: Hello all, I am not trying to solve your problem, I just want to tell you and other that i have the same problem but my soundcard is Yamaha OPL3-sax 719 chip maybe someone can help us... regards, Amin Yuliastanto -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Mickey Soltys Sent: 20 Desember 2000 9:25 To: [EMAIL PROTECTED] Subject: [newbie] Help with soundcard Hello all, I am running Mandrake 2.2.17-21. I have a Soundblaster Live soundcard which works fine under Winblows. However, when I try to configure it with Harddrake, I get the following message /lib/modules/2.2.17-21mdk/alsa/snd-card-emu10k/.0:init.nodule: device or resource busy. Has anyone had any luck with one of these soundcards? Can anyone help me? Thanks, Mickey Soltys -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Mr. Smith Sent: 22 Desember 2000 12:12 To: [EMAIL PROTECTED] Subject: [newbie] still sound... Group, Does anyone know anything I can do or anyone I can ask that can get my Sound Blaster Live Value working in 7.2. I have tried pretty much everything the group has recommended so far...I also tried a bunch of stuff on deja as well. I tried to update the drivers but it said there was a kernel conflict. At one point before I reinstalled, it said something about the device or resource being busy but I don't remember exactly. Also when trying to configure it using harddrake (in root on the command prompt) and it said that it couldn't adjust the volume because it didn't have a mixer. Hell if I know...I am about to give up on it...oh well Thanks for everyones help Mr. Smith
Re: [newbie] still sound...
Try upgradeing your KDElibs/KDEsoundlibs. There should be new versions available in MandrakeUpdate. That's what got my live value working in KDE. Try using drakconf and it's "hardware configuration" to set it up. try insmod emu10k1, not that alsa drive too. steve d... On Friday 22 December 2000 03:14, you wrote: dear mr. smith does your problem like this one if it is so you can do what Aric told me and my yamaha sc now is working Salam, Amin Yuliastanto === Yes, thank you very much Aric right know I listening xmms playing Sugar Ray-Every Morning.mp3 cool.. Salam, Amin Yuliastanto -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Aric S. Bergren Sent: 21 Desember 2000 3:05 To: [EMAIL PROTECTED] Subject: Re: [newbie] Help with soundcard HI All!!! First get out of x-windows by going to the shutdown section and selecting console mode..(after it boots into it you may have to press enter to get a login prompt)log in as rootand then run sndconfig.i had the same problem and this worked like a charm, and you get to hear linus torvalds pronounce linux! Good luck!!! Amin Yuliastanto wrote: Hello all, I am not trying to solve your problem, I just want to tell you and other that i have the same problem but my soundcard is Yamaha OPL3-sax 719 chip maybe someone can help us... regards, Amin Yuliastanto -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Mickey Soltys Sent: 20 Desember 2000 9:25 To: [EMAIL PROTECTED] Subject: [newbie] Help with soundcard Hello all, I am running Mandrake 2.2.17-21. I have a Soundblaster Live soundcard which works fine under Winblows. However, when I try to configure it with Harddrake, I get the following message /lib/modules/2.2.17-21mdk/alsa/snd-card-emu10k/.0:init.nodule: device or resource busy. Has anyone had any luck with one of these soundcards? Can anyone help me? Thanks, Mickey Soltys -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Mr. Smith Sent: 22 Desember 2000 12:12 To: [EMAIL PROTECTED] Subject: [newbie] still sound... Group, Does anyone know anything I can do or anyone I can ask that can get my Sound Blaster Live Value working in 7.2. I have tried pretty much everything the group has recommended so far...I also tried a bunch of stuff on deja as well. I tried to update the drivers but it said there was a kernel conflict. At one point before I reinstalled, it said something about the device or resource being busy but I don't remember exactly. Also when trying to configure it using harddrake (in root on the command prompt) and it said that it couldn't adjust the volume because it didn't have a mixer. Hell if I know...I am about to give up on it...oh well Thanks for everyones help Mr. Smith
