RE: [newbie] Mandrake 10 + Diva Server card problems

2004-06-07 Thread Jamie Kerwick
Thanks for this reply. My collegue has filled in the requisition form so
maybe we'll hear back from them.

This is indeed for my work place. Its meant for use as a central
fax-server type of thing.

Are there any other alternative software packages that can deal with
this type of thing??

Thanks,

Jamie



[EMAIL PROTECTED]
ITS
Internal Extension : 5806
Direct Dial: 0870 754 5806

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Frans Ketelaars
Sent: 04 June 2004 23:01
To: [EMAIL PROTECTED]
Subject: Re: [newbie] Mandrake 10 + Diva Server card problems

On Friday 04 June 2004 13:38, Jamie Kerwick wrote:
 Hi there,

 A collegue of mine is attempting to install  use a Diva server
 (ISDN) card using Mandrake 10 official.
 The devices (3 of them) are found by Mandrake Device Manager, but we 
 are so far unable to load the Diva server drivers from their website 
 (www.eicon.com). As they didn't have any mandrake drivers available we

 chose the latest Redhat ones.
 However, they don't seem to work as the config script blurts out 
 errors about invalid module format when it tries to insmod them.

What script? Oh, I see, you are asked to run a script after installing
the rpm.

http://www.eicon.com/worldwide/products/MediaGateways/DivaServerforLinux
.htm?dl=1regID=11401
mentions drivers for specific kernels from some distro's. Those drivers
are compiled for those kernels and will not work for other kernels.

You could try this:
-
If you require another distribution or kernel version, please fill in
the Requisition form. Your information will be submitted to a pre-sales
consultant who will be pleased to contact you to discuss your commercial
and technical requirements. 
-

When you click the Diva Server for Linux - Version 7.0 download link it
says: Diva Server for Linux allows Eicon Diva Server adapters to be
used with the Linux operating system for SuSE, Red Hat or generic Linux
distribution and Source level RPM: Build Diva drivers or binary
RPM package for custom kernel from source code Kernel 2.6.X Support
so they suggest it is possible to compile the drivers for the Mandrake
kernel you are using. I haven't found any source code but I probably
didn't look good enough. If you can't find it either then maybe you
should contact their technical support. They offer Linux drivers and
some of their software is licenced under the GPL so they seem a Linux
and FOSS software friendly company :) Another idea is to post to the
Mandrake expert list.

http://www.eicon.com/worldwide/products/MediaGateways/DivaServerforLinux
.htm
also metions isdn4linux ( http://www.isdn4linux.de/ ). I have no idea if
that would give you fax functonality.

 Has anyone succeeded in installing a diva server (ISND) card  
 software on Mandrake 10 ??
 Any suggestions for alternative software to use ?? (the idea is to use

 the card to send outgoing faxes)

http://www.eicon.com/worldwide/products/MediaGateways/DivaServerforLinux
.htm
mentions isdn4linux ( http://www.isdn4linux.de/ ). I have no idea if
that would give you fax functionality.

An external (not USB) modem for a normal telephone line is the easiest
way to get sending faxes working.

Just curious, is this for your workplace?

 Thanks,

 Jamie

HTH,

-Frans



** E-mail Disclaimer **

This e-mail message is confidential and for use by the addressee only.  If the message 
is received by anyone other than the addressee, please return the message to the 
sender by replying to it and then delete the message from your computer.  Please note 
that any views, or opinions presented in this e-mail are solely those of the author 
and do not necessarily represent those of The Benenden Healthcare Society Limited.  
The recipient should check this e-mail and any attachments for the presence of 
viruses.  The Benenden Healthcare Society Limited accepts no liability for any damages 
caused by any virus transmitted by this email and its attachments. The Benenden 
Healthcare Society Limited is regulated by the Financial Services Authority (FSA) and 
is an Incorporated Friendly Society, registered under the Friendly Societies Act 1992. 
Registered No: 480F. 

The Benenden Healthcare Society Limited, Registered Office: Holgate Park Drive, York, 
YO26 4GG. Tel 0870 7545 700  Fax 0870 7545 821  www.benenden.org.uk.

***


Want to buy your Pack or Services from MandrakeSoft? 
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com



Re: [newbie] Mandrake 10 + Diva Server card problems

2004-06-04 Thread Frans Ketelaars
On Friday 04 June 2004 13:38, Jamie Kerwick wrote:
 Hi there,

 A collegue of mine is attempting to install  use a Diva server
 (ISDN) card using Mandrake 10 official.
 The devices (3 of them) are found by Mandrake Device Manager, but we
 are so far unable to load the Diva server drivers from their website
 (www.eicon.com). As they didn't have any mandrake drivers available
 we chose the latest Redhat ones.
 However, they don't seem to work as the config script blurts out
 errors about invalid module format when it tries to insmod them.

What script? Oh, I see, you are asked to run a script after installing 
the rpm.

http://www.eicon.com/worldwide/products/MediaGateways/DivaServerforLinux.htm?dl=1regID=11401
mentions drivers for specific kernels from some distro's. Those drivers 
are compiled for those kernels and will not work for other kernels.

You could try this:
-
If you require another distribution or kernel version, please fill in 
the Requisition form. Your information will be submitted to a pre-sales 
consultant who will be pleased to contact you to discuss your 
commercial and technical requirements. 
-

When you click the Diva Server for Linux - Version 7.0 download link it 
says: Diva Server for Linux allows Eicon Diva Server adapters to be 
used with the Linux operating system for SuSE, Red Hat or generic Linux 
distribution and Source level RPM: Build Diva drivers or binary 
RPM package for custom kernel from source code
Kernel 2.6.X Support so they suggest it is possible to compile the 
drivers for the Mandrake kernel you are using. I haven't found any 
source code but I probably didn't look good enough. If you can't find 
it either then maybe you should contact their technical support. They 
offer Linux drivers and some of their software is licenced under the 
GPL so they seem a Linux and FOSS software friendly company :) Another 
idea is to post to the Mandrake expert list.

http://www.eicon.com/worldwide/products/MediaGateways/DivaServerforLinux.htm 
also metions isdn4linux ( http://www.isdn4linux.de/ ). I have no idea 
if that would give you fax functonality.

 Has anyone succeeded in installing a diva server (ISND) card 
 software on Mandrake 10 ??
 Any suggestions for alternative software to use ?? (the idea is to
 use the card to send outgoing faxes)

http://www.eicon.com/worldwide/products/MediaGateways/DivaServerforLinux.htm 
mentions isdn4linux ( http://www.isdn4linux.de/ ). I have no idea if 
that would give you fax functionality.

An external (not USB) modem for a normal telephone line is the easiest 
way to get sending faxes working.

Just curious, is this for your workplace?

 Thanks,

 Jamie

HTH,

-Frans



Want to buy your Pack or Services from MandrakeSoft? 
Go to http://www.mandrakestore.com
Join the Club : http://www.mandrakeclub.com